Engineering Papers⌕ Search

Engineering topics

Underwood, J. H.

Publications and source records attributed to Underwood, J. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Comparison of compliance results for the wedge-loaded compact specimen

Results of the ratio of stress intensity factor to crack-mouth displacement as a function of crack length are presented for the wedge-loaded compact specimen. Comparisons are made between experimental compliance results, numerical results from collocation methods, and deep-crack limit-solution results. Applications are for crack-arrest and stress-corrosion-cracking tests for metals and other materials under predominantly linear elastic conditions.

Underwood, J. H.↗
NASA NTRS1988

Grazing incidence technique to obtain spatially resolved spectra from laser heated plasmas

An experimental method is described in which a grazing incidence spectrograph is used to obtain spatially resolved spectra of laser heated plasmas in the 6-370-A region. In the experiment, small target spheres were irradiated by tightly focused laser beams. A tilted grazing incidence elliptical mirror placed 1.3 m from the target focuses the plasma radiation on the spectrograph slit at a distance of 0.7 m producing a useful degree of spatial resolution in the recorded spectral lines. The spectrum from a copper target is presented together with an X-ray pinhole camera image of the plasma.

Behring, W. E.↗
NASA NTRS1988

Soft X-ray images of the solar corona using normal incidence optics

A solar coronal loop system has been photographed in soft X-rays using a normal incidence telescope based on multilayer mirror technology. The telescope consisted of a spherical objective mirror of 4 cm aperture and 1 m focal length, a film cassette, and a focal plane shutter. A metallized thin plastic film filter was used to exclude visible light. The objective mirror was covered with a multilayer coating consisting of alternating layers of tungsten and carbon whose combined thicknesses satisfied the Bragg diffraction condition for 44 A radiation. The image was recorded during a rocket flight on October 25, 1985 and was dominated by emission lines arising from the Si XII spectrum. The rocket also carried a high resolution soft X-ray spectrograph that confirmed the presence of Si XII line radiation in the source. This image represents the first successful use of multilayer technology for astrophysical observations.

Bruner, M. E.↗
NASA NTRS1987

X-ray photographs of a solar active region with a multilayer telescope at normal incidence

An astronomical photograph was obtained with a multilayer X-ray telescope. A 4-cm tungsten-carbon multilayer mirror was flown as part of an experimental solar rocket payload, and successful images were taken of the sun at normal incidence at a wavelength of 44 A. Coronal Si XII emission from an active region was recorded on film; as expected, the structure is very similar to that observed at O VIII wavelengths by the Solar Maximum Mission flat-crystal spectrometer at the same time. The small, simple optical system used in this experiment appears to have achieved a resolution of 5 to 10 arcsec.

Underwood, J. H.↗
NASA NTRS1984

High-Resolution X-Ray Telescope

X-ray telescope for mapping celestial X-ray sources from locations in space uses secondary mirror to magnify images formed by primary mirror. Secondary mirror with hyperboloid/hyperboloid surface located at focal plane of primary mirror.

Davis, J. M.↗
NASA NTRS1983

Normal-Incidence Soft-X-Ray Mirror

Multilayered interference structure has about 6 percent reflectivity. Normal-incidence X-Ray Mirror, bent into spherical surface of radius 1.1mm used to image electroformed-nickel grid onto photographic film sensitive to soft X-rays. Grid set at distance of 1,067 mm from mirror, illuminated by simple Coolidge-type X-ray tube with carbon anode operated from 1.5KV supply. Film set at distance of 1,186 mm from mirror with resultant magnification of 1.11.

Underwood, J. H.↗
NASA NTRS1983

A giant X-ray flare in the Hyades

The Einstein Observatory has observed a giant stellar flare in the Hyades binary HD 27130 whose peak X-ray luminosity is greater than 10 to the 31st ergs/sec. This is several thousand times brighter than the most intense solar flares. HD 27130, first detected as an X-ray source in the central Hyades survey of Stern et al (1981), has recently been determined to be a double-lined eclipsing binary with a 5.6-d period. The primary and secondary are G and K dwarfs, respectively. The estimated 40 million K temperature of the flare decay suggests that it is solar-like, but its deduced size scales are much larger than those observed for typical solar flares. It is suggested that giant flares may be typical of young or rapidly rotating systems.

Stern, R. A.↗
NASA NTRS1982

STARPROBE: Scientific rationale

The scientific rationale and instrumentation problems in the areas of solar internal dynamics and relativity, solar plasma and particle dynamics, and solar atmosphere structure were studied. Current STARPROBE mission and system design concepts are summarized.

Underwood, J. H.↗
NASA NTRS1982

Starprobe - The science opportunities

The scientific objectives of the NASA Starprobe mission for an unmanned spacecraft to pass within three solar radii of the sun's surface are reviewed. Fundamental observations of gravitation, relativity, and factors related to the solar interior, measurements of the static and dynamic electromagnetic fields and the particle populations close to the sun, and observations of the solar atmosphere from the photosphere to the corona with high spatial resolution would be possible with the Starprobe. A determination of the quadrupole coefficient in the expansion of the gravitational potential field of the sun is noted to be possible by measuring the departure from a Keplerian orbit of the Starprobe as it passes perihelion, yielding data on the rate of revolution of the interior of the sun. Further information on shock acceleration, energy losses, radio bursts, interplanetary propagation, and diffusion will be available at 10-60 solar radii.

Underwood, J. H.↗
NASA NTRS1982

Grazing incidence relay optics

The necessity to work in the focal plane of the primary mirrors has been one of the factors limiting the utility of grazing incidence telescopes in X-ray astronomy. In connection with the reported investigation, computer ray tracing programs have been used to study the performance of several grazing incidence relay optics (GIRO) systems used together with a large nested solar X-ray telescope. It was found that GIRO magnifiers are useful to map appropriate sized regions of the sun onto available CCD detectors. GIRO collimators can be used together with an X-ray spectrometer to study the X-ray spectrum from very small regions on the sun. Attention is given to the stationary mode, the tracking mode, and the size of GIRO elements. It is found that for a given GIRO size and magnification a use of the diverging system has the advantage of reducing the overall length of the main telescope-GIRO combination. However, the resolution provided by the diverging GIRO may not be as good as that obtained with the corresponding converging GIRO.

Chase, R. C.↗
NASA NTRS1982

X-ray and extreme ultraviolet imaging using layered synthetic microstructures

Up to now designers of X-ray optical instruments such as microscopes and telescopes have been compelled to use mirrors operating at small glancing angles. However, using vapor deposition techniques, it is now possible to build multilayered thin film structures in which the individual layers have thicknesses comparable with a wavelength of X-rays. These devices operate in a manner exactly analogous to multilayer dielectric coatings at visible wavelengths and can be used to increase the X-ray and extreme ultraviolet reflectivity of surfaces at large glancing angles. These X-ray mirrors have numerous potential applications in X-ray optics. Attention is given to X-ray images with a normal incidence mirror, and applications of multilayer optics. Single-mirror telescopes for solar/stellar astronomy are discussed, taking into account solar corona and transition region studies, and X-ray and extreme ultraviolet astronomy. Hybrid X-ray telescopes are also considered.

Underwood, J. H.↗
NASA NTRS1981

Soft X-ray imaging with a normal incidence mirror

By sputtering, it is possible to make multilayered structures (layered synthetic microstructures or LSMs) with individual layers as thin as a fraction of a nanometer. These techniques have been used to make a multilayered interference mirror to reflect carbon K X rays (at a wavelength of 4.48 nm) at normal incidence. The structure consists of 76 layers of tungsten of thickness 0.765 nm with layers of carbon (thickness 1.510 nm) interspersed, deposited on a 111 line type silicon wafer substrate. This LSM was formed into a concave mirror of radius approximately 1.1 m by bending the substrate, and used in an optical set-up to form images of grids illuminated by an X-ray source. The mirror was found to have a resolution of 5 lines/mm and an efficiency, integrated over the CK band, of between 4 and 8%.

Underwood, J. H.↗
NASA NTRS1981

Stellar coronae in the Hyades - A soft X-ray survey with the Einstein Observatory

An X-ray survey of the central region of the Hyades cluster demonstrates that soft X-ray emission is a common property of the stars in the cluster. Half of the 85 stars surveyed are detected above a sensitivity threshold of 10 to the 28.5th ergs/s at the Hyades distance of 45 pc. The high incidence of X-ray emission and range of observed X-ray luminosities indicate that stellar coronas produce the observed X-ray emission, with a typical X-ray luminosity for solar-type Hyades of 10 to the 29th ergs/s. The use of coronal scaling laws is found to yield reasonable values of maximum coronal temperatures and the fraction of stellar surface covered for the Hyades coronas.

Stern, R. A.↗
NASA NTRS1981

Layered synthetic microstructures as Bragg diffractors for X rays and extreme ultraviolet - Theory and predicted performance

The theory of X-ray diffraction by periodic structures is applied to the layered synthetic microstructures (LSMs) made possible by recent developments in thin film technology, and approximate formulas for estimating their performance are presented. A more complete computation scheme based on optical multilayer theory is also described, and it is shown that the diffracting properties may be tailored to specific applications by adjusting the refractive indices and thicknesses of the component layers. The theory may be modified to take account of imperfections in the LMS structure, and the properties of nonperiodic structures thereby computed. Structures with high integrated reflectivity constructed according to the methods defined have potential application in many areas of X-ray or EUV research and instrumentation.

Underwood, J. H.↗
NASA NTRS1981

Results from the central Hyades survey

Results of a soft X-ray survey of the central 5 deg of the Hyades star cluster made with the Einstein Observatory Imaging Proportional Counter are presented. Virtually all of the late F and early G stars in the cluster were detected at an X-ray luminosity of greater than 10 to the 28.5 erg/sec, although only about 50% of the stars in the cluster as a whole were detected. Plots of X-ray luminosity against B-V index indicate that the typical solar-type star in the Hyades is emitting soft X-rays at a level approximately 30 times that of the active sun. Histograms of the X-ray to bolometric luminosity ratio reveal a gradual distinction between late A-early F stars, which are expected to possess little or no convective envelope, and solar-type (F8-G5) stars, with convective outer atmospheres. Results confirm the dependence of stellar coronal activity on rotation, and establish the prevalence of stellar coronae throughout the main sequence and the giant regions of the H-R diagram.

Stern, R. A.↗
NASA NTRS1981

Numerical studies of the energy balance in coronal loops

A numerical method is applied to treat the energy balance of quasi-static solar coronal loops, which have been observed to persist for periods much greater than the radiative cooling time. The quasi-static loop model employed takes into account gravity, density-, temperature- or position-dependent energy input, an accurate form of the radiative losses and variable loop cross-sectional area, under assumptions of energy input by coronal heating balanced by radiative and conductive losses, an optically thin plasma, energy conduction along the field lines only and hydrostatic equilibrium. Computations of an emission measure function for various distributions of the energy input and loop geometries are then presented which show that little information on the location of the energy input may be gained from spectral line intensity measurements integrated over a single loop.

Underwood, J. H.↗
NASA NTRS1980

A proposed standard round compact specimen for plane strain fracture toughness testing

A round, disk-shaped specimen is proposed as a standard test specimen for addition to ASTM Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78A). The specimen is diametrically cracked, and loaded in the same way as the existing standard compact specimen. Tests and analyses were performed to verify that the proposed round compact specimen and associated stress intensity factor K solution are appropriate for a standard plane strain fracture toughness test. The use of the round compact specimen for other fracture tests is described.

Underwood, J. H.↗