Engineering topics
Publications and source records attributed to Twicken, Joseph D..
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 8 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 7 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 5 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 6 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
The Science Processing Operations Center is in the process of testing and deploying Release 4.0 of the codebase in the March 2019 timeframe. This paper describes the new features of the software and their likely impact on the quality of the TESS science data products. The major goals of Release 4.0 are to improve the extraction of photometry from the pixels in light of the non-uniform pointing performance and the identification of instrumental signatures from the light curves. We also describe modifications to the FFI pipeline to allow the generation of FFI light curves, correction of the instrumental systematics therein, and planet searches, primarily for the purpose of validating the 2-min pipeline against the FFI pipeline, but also to be able to provide cotrending basis vectors (CBVs) derived directly from the FFIs to the public to aid them in their extraction and correction of photometry. We also discuss the improvements in photometric performance of the pipeline and its various components.The lapse in funding experienced between 22 December 2018 and 27 January 2019 significantly delayed our ability to conduct integration testing as planned for late December/early January, delaying the start of V&V by one month to the end of February 2019.The TESS Mission is funded by NASA's Science Mission Directorate as an Astrophysics Explorer Mission.The Science Processing Operations Center is in the process of testing and deplo!"ing Release 4.0 of thecodebase In the March 2019 tlmeframe. This paper describes the new features or the software and theirlikely impact on the quality of the TESS science data products. The major goals or Release 4.0 are to Imtheidentification of instrumental signatures from the light cuNes. We also describe modifications tothe FFI pipeline to allow the generation of FFI light curves, correction of the instrumental systematicstherein, and planet searches, primarily for the purpose of validating the 2-min pipelineagainst the FFI pipeline, but also to be able to provide cotrending basis vectors (C3Vs) ,,.~,.;.derived directly from the FFls to the public to aid them in their extractbn and correction , :-; ~'-'\'.'.of photometry. We also discuss the Improvements In photometric performance• of ~~\":;:•the pipeline and its various components. :,;.-.;The lapse In funding experienced between 22 December 2018 and 27January 2019 significantly delayed our ability to conduct Integrationtesting as planned for late December/early January, delaying thestart of V&V by one month to the end of February 2019.The TESS Mission is funded by NASA's Science Mission Directorateas an Astrophysics Explorer Mission.o.iu.c...,.....~~New Features in SPOC 4.01. Use of quatemions In photometry and centroiding.2. Use of quaternions to Identify high-motion cadences and exclude same.3. Use of the TPS detections to deemphasize pathological cadences ("skyline flattenlng"I.4. Improved CAL calculations for black and smear correction.5. PA brightness metric calculation improvements (induo'e crowding in calrulation)./ • 6. Improved POC spike goodness metric.•~• 7. Improved handling of gaps and momentum duni:>S in POC.8. Improved tuning of POC., 9. Improved attitude tweak correction in PDC.10. Improvements in PDC introduced noise and correlation goodness metrics11. Using the improved spike goodness metric to minimize overlitting in the spikeremover ' • :,''l./ 12. Enable FFI processing through planet search.,,. ,• • "« ,;,,,•.~'A , 13.1 D4.V S mtreinaim-relipnoinrgts d aartcah irveetrdie tvoa Ml aAnSdT p ersistence to database 15. Improved management of jobs on the NAS Pleiadss supercomputer
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 4 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the planetary transit search data products produced by the Science Processing Operations Center at Ames Research Center from Sectors 1-2 observations made with the TESS (Transiting Exoplanet Survey Satellite) spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the planetary transit search data products produced by the Science Processing Operations Center at Ames Research Center from Sectors 1-3 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 3 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This release note discusses the science data products produced by the Science Processing Operations Center at Ames Research Center from Sector 2 observations made with the TESS spacecraft and cameras as a means to document instrument performance and data characteristics.
This paper discusses the transit model-fitting and multiple-planet search algorithms and performance of the Kepler Science Data Processing Pipeline, developed by the Kepler Science Operations Center (SOC). Threshold crossing events (TCEs), which are transit candidate events, are generated by the Transiting Planet Search (TPS) component of the pipeline and subsequently processed in the data validation (DV) component. The transit model is used in DV to fit TCEs to characterize planetary candidates and to derive parameters that are used in various diagnostic tests to classify them. After the signature associated with the TCE is removed from the light curve of the target star, the residual light curve goes through TPS again to search for additional TCEs. The iterative process of transit model fitting and multiple-planet search continues until no TCE is generated from the residual light curve or an upper limit is reached. The transit model-fitting and multiple-planet search performance of the final release (9.3, 2016January) of the pipeline is demonstrated with the results of the processing of four years (17 quarters) of flight data from the primary Kepler Mission. The transit model-fitting results are accessible from the NASA Exoplanet Archive. The final version of the SOC codebase is available through GitHub.
The Kepler Mission was designed to identify and characterize transiting planets in the Kepler Field of View and to determine their occurrence rates. Emphasis was placed on identification of Earth-size planets orbiting in the Habitable Zone of their host stars. Science data were acquired for a period of four years. Long-cadence data with 29.4 min sampling were obtained for approx. 200,000 individual stellar targets in at least one observing quarter in the primary Kepler Mission. Light curves for target stars are extracted in the Kepler Science Data Processing Pipeline, and are searched for transiting planet signatures. A Threshold Crossing Event is generated in the transit search for targets where the transit detection threshold is exceeded and transit consistency checks are satisfied. These targets are subjected to further scrutiny in the Data Validation (DV) component of the Pipeline. Transiting planet candidates are characterized in DV, and light curves are searched for additional planets after transit signatures are modeled and removed. A suite of diagnostic tests is performed on all candidates to aid in discrimination between genuine transiting planets and instrumental or astrophysical false positives. Data products are generated per target and planet candidate to document and display transiting planet model fit and diagnostic test results. These products are exported to the Exoplanet Archive at the NASA Exoplanet Science Institute, and are available to the community. We describe the DV architecture and diagnostic tests, and provide a brief overview of the data products. Transiting planet modeling and the search for multiple planets on individual targets are described in a companion paper. The final revision of the Kepler Pipeline code base is available to the general public through GitHub. The Kepler Pipeline has also been modified to support the Transiting Exoplanet Survey Satellite (TESS) Mission which is expected to commence in 2018.
The Transiting Exoplanet Survey Satellite (TESS) science pipeline is being developed by the Science Processing Operations Center (SPOC) at NASA Ames Research Center based on the highly successful Kepler Mission science pipeline. Like the Kepler pipeline, the TESS science pipeline will provide calibrated pixels, simple and systematic error-corrected aperture photometry, and centroid locations for all 200,000+ target stars, observed over the 2-year mission, along with associated uncertainties. The pixel and light curve products are modeled on the Kepler archive products and will be archived to the Mikulski Archive for Space Telescopes (MAST). In addition to the nominal science data, the 30-minute Full Frame Images (FFIs) simultaneously collected by TESS will also be calibrated by the SPOC and archived at MAST. The TESS pipeline will search through all light curves for evidence of transits that occur when a planet crosses the disk of its host star. The Data Validation pipeline will generate a suite of diagnostic metrics for each transit-like signature discovered, and extract planetary parameters by fitting a limb-darkened transit model to each potential planetary signature. The results of the transit search will be modeled on the Kepler transit search products (tabulated numerical results, time series products, and pdf reports) all of which will be archived to MAST.
We give an overview of the operational concepts and architecture of the Kepler Science Processing Pipeline. Designed, developed, operated, and maintained by the Kepler Science Operations Center (SOC) at NASA Ames Research Center, the Science Processing Pipeline is a central element of the Kepler Ground Data System. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center which hosts the computers required to perform data analysis. The SOC's charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Processing Pipeline, including, the software algorithms. We present the high-performance, parallel computing software modules of the pipeline that perform transit photometry, pixel-level calibration, systematic error correction, attitude determination, stellar target management, and instrument characterization.
The Transiting Exoplanet Survey Satellite (TESS) will conduct a search for Earth's closest cousins starting in early 2018 and is expected to discover approximately 1,000 small planets with R(sub p) less than 4 (solar radius) and measure the masses of at least 50 of these small worlds. The Science Processing Operations Center (SPOC) is being developed at NASA Ames Research Center based on the Kepler science pipeline and will generate calibrated pixels and light curves on the NASA Advanced Supercomputing Division's Pleiades supercomputer. The SPOC will also search for periodic transit events and generate validation products for the transit-like features in the light curves. All TESS SPOC data products will be archived to the Mikulski Archive for Space Telescopes (MAST).
These Data Release Notes provide information specific to the current reprocessing and re-export of the Q0-Q17 data. The data products included in this data release include target pixel files, light curve files, FFIs,CBVs, ARP, Background, and Collateral files. This release marks the final processing of the Kepler Mission Data. See Tables 1 and 2 for a list of the reprocessed Kepler cadence data. See Table 3 for a list of the available FFIs. The Long Cadence Data, Short Cadence Data, and FFI data are documented in these data release notes. The ancillary files (i.e., cotrending basis vectors, artifact removal pixels, background, and collateral data) are described in the Archive Manual (Thompson et al., 2016).
The Transiting Exoplanet Survey Satellite (TESS) will conduct a search for Earth’s closest cousins starting in late 2017. TESS will discover approx.1,000 small planets and measure the masses of at least 50 of these small worlds. The Science Processing Operations Center (SPOC) is being developed based on the Kepler science pipeline and will generate calibrated pixels and light curves on the NAS Pleiades supercomputer. The SPOC will search for periodic transit events and generate validation products for the transit-like features in the light curves. All TESS SPOC data products will be archived to the Mikulski Archive for Space Telescopes.
The Kepler space telescope is designed to detect Earth-like planets around Sun-like stars using transit photometry by simultaneously observing 100,000 stellar targets nearly continuously over a three and a half year period. The 96-megapixel focal plane consists of 42 charge-coupled devices (CCD) each containing two 1024 x 1100 pixel arrays. Cross-correlations between calibrated pixels are introduced by common calibrations performed on each CCD requiring downstream data products access to the calibrated pixel covariance matrix in order to properly estimate uncertainties. The prohibitively large covariance matrices corresponding to the ~75,000 calibrated pixels per CCD preclude calculating and storing the covariance in standard lock-step fashion. We present a novel framework used to implement standard propagation of uncertainties (POU) in the Kepler Science Operations Center (SOC) data processing pipeline. The POU framework captures the variance of the raw pixel data and the kernel of each subsequent calibration transformation allowing the full covariance matrix of any subset of calibrated pixels to be recalled on-the-fly at any step in the calibration process. Singular value decomposition (SVD) is used to compress and low-pass filter the raw uncertainty data as well as any data dependent kernels. The combination of POU framework and SVD compression provide downstream consumers of the calibrated pixel data access to the full covariance matrix of any subset of the calibrated pixels traceable to pixel level measurement uncertainties without having to store, retrieve and operate on prohibitively large covariance matrices. We describe the POU Framework and SVD compression scheme and its implementation in the Kepler SOC pipeline.