Engineering topics
Publications and source records attributed to Turchi, Peter John.
This report documents the execution of the PHELIX driven Crenulation 2 and 3 at LANSCE proton radiography experiments in FY17 in support of the LANL Science Campaign-1 L2 Milestone (#5721). It should be noted that LANL Science Campaign 3 also supports the PHELIX at pRad efforts.
We briefly report on the first of PHELIX driven Crenulation experiments diagnosed with proton radiography. PHELIX is a 300 kJ capacitor bank located at the LANL LANSCE pRad facility. It is capable of delivering a 4 MA, 10 us current pulse to a low inductance cylindrical load. Using a magnetically driven cylindrical liner, we have shocked a concentric tin cylindrical shell to melt-on-release and compared to theory and calculations. The inner surface of the tin cylinder has three sectors of single-mode perturbations, which are subject to Richtmyer-Meshkov Instability (RMI). Recent theoretical work on the EOS of tin has modified both the Hugoniot and the isentropes for release into various states in tabular data. The new multiphase EOS for tin, SESAME 2161, includes the beta and gamma solid phases as well as a liquid phase. It predicts a lower pressure boundary for release to pure solid (~20 GPa) and a higher pressure boundary for release to pure liquid (~35 GPa) than the existing SESAME 2160 table.
There is a great interest in RMI as source of ejecta from metal shells. Previous experiments have explored wavelength amplitude (kA) variation but they have a small range of drive pressures and are in planer geometry. Simulations, both MD and hydro, have explored RMI in planer geometry. The ejecta source model from RMI is an area of active algorithm and code development in ASCI-IC Lagrangian Applications Project. PHELIX offers precise, reproducible variable driver for Hydro and material physics diagnoses with proton radiography.
There is great interest in the behavior of the free surface of tin under shock loading. While it is known that meso-scale surface imperfections can seed the Richtmyer- Meshkov Instability (RMI) for a surface that is melted on release, much less is known about a tin surface that is solid, but plastically deforming. Here material properties such as shear and yield strength come into play especially in converging geometry. Previous experiments have been driven by direct contact HE. Usually a thin, flat target coupon is fielded with various single-mode, sinusoidal, machined, profiles on the free surface. The free surface is adjacent to either vacuum or an inert receiver gas. Most of these previous driver/target configurations have been nominal planer geometry. With modern HE it has been straightforward to shock tin into melt on release. However it has been challenging to achieve a low enough pressure for solid state on release. Here we propose to extend the existing base of knowledge to include the behavior of the free surface of tin in cylindrical converging geometry. By shock loading a cylindrical tin shell with a magnetically driven cylindrical liner impactor, the free surface evolution can be diagnosed with proton radiography. With the PHELIX capacitor bank, the drive can easily be varied to span the pressure range to achieve solid, mixed, and liquid states on release. A conceptual cylindrical liner and target is shown in Figure 1.
Abstract Not Provided
In an effort to understand the complex hydrodynamic flow present when a non-ideal (or damaged) surface between a dense, solid-state metal impinges on a light, gas in converging geometry, two DSH experiments have been conducted at the LANL LANSCE pRad facility utilizing magnetic drive from the Precision High Energy-density Liner Implosion eXperiment (PHELIX) pulsed power capacitor bank. Here a tungsten power coated target aluminum cylinder was filled with inert gas (Ar/Xe). An outer aluminum cylinder is magnetically accelerated and impacts the target shock launching the powder into the gas and compressing the cylinder until such time as the increase in gas pressure causes stagnation. Each experiment is imaged with a 21-frame proton radiography movie where gas shocks, powder distribution, and target cylinder are clearly visible. These two experiments complement the DSH-0 experiment from FY14 where the target cylinder was evacuated as a control case.
There is great interest in the behavior of the free surface of tin under shock loading. While it is known that meso-scale surface imperfections can seed the Richtmyer-Meshkov Instability (RMI) for a surface that is melted on release, much less is known about a tin surface that is solid, but plastically deforming. Here material properties such as shear and yield strength come into play especially in converging geometry. Previous experiments have been driven by direct contact HE. Usually a thin, flat target coupon is fielded with various single-mode, sinusoidal, machined, profiles on the free surface. The free surface is adjacent to either vacuum or an inert receiver gas. Most of these previous driver/target configurations have been nominal planer geometry. With modern HE it has been straightforward to shock tin into melt on release. However it has been challenging to achieve a low enough pressure for solid state on release. Here we propose to extend the existing base of knowledge to include the behavior of the free surface of tin in cylindrical converging geometry. By shock loading a cylindrical tin shell with a magnetically driven cylindrical liner impactor, the free surface evolution can be diagnosed with proton radiography. With the PHELIX capacitor bank, the drive can easily be varied to span the pressure range to achieve solid, mixed, and liquid states on release.