Engineering topics

Tseng, K.

Publications and source records attributed to Tseng, K..

18 records

NASA NTRS1985

A first-order time-domain Green's function approach to supersonic unsteady flow

A time-domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. The Green's function method is employed in order to convert the potential-flow differential equation into an integral one. This integral equation is then discretized, in space through standard finite-element technique, and in time through finite-difference, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. Consistent with the spatial linear (first-order) finite-element approximations, the potential and co-normalwash are assumed to vary linearly in time. The long range goal of our research is to develop a comprehensive theory for unsteady supersonic potential aerodynamics which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗

NASA NTRS1985

A first-order Green's function approach to supersonic oscillatory flow: A mixed analytic and numeric treatment

A frequency domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. In this range the effects of the nonlinear terms in the unsteady supersonic compressible velocity potential equation are negligible and therefore these terms will be omitted. The Green's function method is employed in order to convert the potential flow differential equation into an integral one. This integral equation is then discretized, through standard finite element technique, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration (e.g., finite-thickness wing, wing-body-tail) is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. The long range goal is to develop a comprehensive theory for unsteady supersonic potential aerodynamic which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗

NASA NTRS1984

Application of the Green's function method for 2- and 3-dimensional steady transonic flows

A Time-Domain Green's function method for the nonlinear time-dependent three-dimensional aerodynamic potential equation is presented. The Green's theorem is being used to transform the partial differential equation into an integro-differential-delay equation. Finite-element and finite-difference methods are employed for the spatial and time discretizations to approximate the integral equation by a system of differential-delay equations. Solution may be obtained by solving for this nonlinear simultaneous system of equations in time. This paper discusses the application of the method to the Transonic Small Disturbance Equation and numerical results for lifting and nonlifting airfoils and wings in steady flows are presented.

Tseng, K.↗

NASA NTRS1982

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics

Computer program SOUSSA-P (Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics--Production Version) accurately and efficiently evaluates steady and unsteady aerodynamic loads on aircraft having arbitrary shapes and motions, including structural deformations.

Desmarais, R. N.↗

NASA NTRS1982

Nonlinear Green's function method for unsteady transonic flows

Advantages to employing Green's function in describing unsteady three-dimensional transonic flows are explored. The development of the function for application to linear subsonic and supersonic unsteady aerodynamics is reviewed. It is shown that unique solutions are possible for external flows, with all functional expressions being defined in Prandtl-Glauert space. The development of methods of using the Green's function for transonic flows is traced, noting the necessity of including the effects of significant nonlinear terms. The steady-state problem is considered to demonstrate the shock-capturing ability of the method and the usefulness of the function in the incompressible, subsonic, transonic, and supersonic areas of potential unsteady three-dimensional flows around complex configurations. Computational time is asserted to be an order of magnitude less than with finite difference methods.

Tseng, K.↗

NASA NTRS1980

Steady, oscillatory, and unsteady subsonic Aerodynamics, production version 1.1 (SOUSSA-P1.1). Volume 2: User/programmer manual

A user/programmer manual for the computer program SOUSSA P 1.1 is presented. The program was designed to provide accurate and efficient evaluation of steady and unsteady loads on aircraft having arbitrary shapes and motions, including structural deformations. These design goals were in part achieved through the incorporation of the data handling capabilities of the SPAR finite element Structural Analysis computer program. As a further result, SOUSSA P possesses an extensive checkpoint/ restart facility. The programmer's portion of this manual includes overlay/subroutine hierarchy, logical flow of control, definition of SOUSSA P 1.1 FORTRAN variables, and definition of SOUSSA P 1.1 subroutines. Purpose of the SOUSSA P 1.1 modules, input data to the program, output of the program, hardware/software requirements, error detection and reporting capabilities, job control statements, a summary of the procedure for running the program and two test cases including input and output and listings are described in the user oriented portion of the manual.

Smolka, S. A.↗

NASA NTRS1978

Time-domain Green's Function Method for three-dimensional nonlinear subsonic flows

The Green's Function Method for linearized 3D unsteady potential flow (embedded in the computer code SOUSSA P) is extended to include the time-domain analysis as well as the nonlinear term retained in the transonic small disturbance equation. The differential-delay equations in time, as obtained by applying the Green's Function Method (in a generalized sense) and the finite-element technique to the transonic equation, are solved directly in the time domain. Comparisons are made with both linearized frequency-domain calculations and existing nonlinear results.

Tseng, K.↗

NASA NTRS1978

Steady, Oscillatory and Unsteady, Subsonic and Supersonic Aerodynamics (SOUSSA) for complex aircraft configurations

The Green's function method and the computer program SOUSSA (Steady Oscillatory and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed. The Green's function method is applied to the fully unsteady potential equation yielding an integro-differential-delay equation. This equation is approximated by a set of differential-delay equations in time using the finite element method. The Laplace transform is used to yield a matrix relating the velocity potential to the normal wash. The matrix of the generalized aerodynamic forces is obtained by premultiplying and postmultiplying the matrices relating generalized forces to the potential and the normal wash by the generalized coordinates. The program SOUSSA is compared with existing numerical results. Results indicate that the program is not only general, flexible, and easy to use, but also accurate and fast.

Morino, L.↗

NASA NTRS1977

Recent developments in the Green's function method

A recent computational development on the Green's function method (the method used in the computer program SOUSSA: Steady, Oscillatory and Unsteady Subsonic and Supersonic Aerodynamics) is presented. A scheme consisting of combined numerical (Gaussian quadrature) and analytical procedures for the evaluation of the source and doublet integrals used in the program is presented. This combination results in 80 to 90% reduction in computer time.

Tseng, K.↗

NASA NTRS1977

State-space formulations for flutter analysis

Two state-space methods for true-damping flutter analysis are presented here. The aerodynamic matrix is assumed to be function of the complex reduced frequency p (off-the-imaginary axis aerodynamics) as the ones provided for instance by the computer code SOUSSA (Steady, Oscillatory and Unsteady, Subsonic and Supersonic Aerodynamics). This matrix is approximated by a third order polynomial or by a Pade's matrix approximant. Then the equations are cast into a suitable state space format including the Laplace transform of the space vector, a frequency-independent matrix, and the flight speed. The solution is then obtained by standard root-locus methods. Results are in good agreement with existing ones in a suitable range of the flutter reduced frequency. A discussion on spurious roots is also included.

Weiss, S. J.↗

NASA NTRS1977

Unsteady subsonic and supersonic potential aerodynamics for complex configurations

A recently developed general theory for unsteady compressible potential fluid dynamics for complex-configuration aircraft is reviewed. The method is based on a combination of the following techniques: Green's function method (to transform the differential equation into an integral differential-delay equation), finite element method (to transform the equation into a set of differential-delay equations in time), and the Laplace transform method (to transform the differential-delay equations into algebraic equations).

Morino, L.↗

NASA NTRS1976

A new unified approach for analyzing wing-body-tail configurations with control surfaces

A general theory for steady and unsteady, subsonic and supersonic potential aerodynamics for complex configurations is presented. Special attention is given to the theoretical formulation and the corresponding numerical implementation for coplanar interfering surfaces. Applying the Green's function method to the equation of the velocity potential and discretizing the spatial problem by using the finite-element technique, yields a set of differential-delay equations in time relating the potential to the normal wash. For fully unsteady flow, the motion is assumed to consist of constant subsonic or supersonic speed for time t less than or equal to 0 (steady state) and of small perturbations around the steady state for time t greater than 0; the solution is obtained in the Laplace domain. From the potential, the aerodynamic pressure and the generalized forces are evaluated. The program SOUSSA (Steady, Oscillatory and Unsteady Subsonic and Supersonic Aerodynamics) is briefly described. Numerical results obtained with SOUSSA are presented.

Tseng, K.↗

NASA NTRS1976

State-space formulations for flutter analysis

Various methods are presented and assessed for approximating the aerodynamic forces so that the State Space formulation and off-the-imaginary axis analysis are retained. The advantages of retaining these features are considerable, not only in simplifying the flutter analysis, but especially for more advanced applications such as optimal design of active control in which the flutter is merely a constraint to the optimization problem.

Weiss, S. J.↗

NASA NTRS1976

Fully unsteady subsonic and supersonic potential aerodynamics of complex aircraft configurations for flutter applications

The paper presents a general theory of steady, oscillatory or fully unsteady, subsonic and supersonic aerodynamics for aircraft of arbitrary shape. The finite element method is used to obtain the time functional relationship between aerodynamic potential and its normal derivative (normal wash) in a form suitable for computational analysis. The matrix of the aerodynamic influence coefficients, as necessary for flutter calculations, is obtained as a result. The theory is implemented in a computer program, and some typical results obtained with this program are presented.

Tseng, K.↗

NASA NTRS1975

A new unified approach to analyze wing-body-tail configurations with control surfaces in steady, oscillatory and fully unsteady, subsonic and supersonic flows

A general formulation for the analysis of steady and unsteady, subsonic and supersonic potential aerodynamics for arbitrary complex geometries is presented. The theoretical formulation, the numerical procedure, and numerical results are included. In particular, generalized forces for fully unsteady (complex frequency) aerodynamics for an AGARD coplanar wing-tail interfering configuration in both subsonic and supersonic flows are considered.

Tseng, K.↗

NASA NTRS1975

Fully unsteady subsonic and supersonic potential aerodynamics for complex aircraft configurations with applications to flutter

A general formulation is presented for the analysis of steady and unsteady, subsonic and supersonic aerodynamics for complex aircraft configurations. The theoretical formulation, the numerical procedure, the description of the program SOUSSA (steady, oscillatory and unsteady, subsonic and supersonic aerodynamics) and numerical results are included. In particular, generalized forces for fully unsteady (complex frequency) aerodynamics for a wing-body configuration, AGARD wing-tail interference in both subsonic and supersonic flows as well as flutter analysis results are included. The theoretical formulation is based upon an integral equation, which includes completely arbitrary motion. Steady and oscillatory aerodynamic flows are considered. Here small-amplitude, fully transient response in the time domain is considered. This yields the aerodynamic transfer function (Laplace transform of the fully unsteady operator) for frequency domain analysis. This is particularly convenient for the linear systems analysis of the whole aircraft.

Tseng, K.↗

NASA NTRS1975

Fully unsteady subsonic and supersonic potential aerodynamics for complex aircraft configurations for flutter applications

A general theory for study, oscillatory or fully unsteady potential compressible aerodynamics around complex configurations is presented. Using the finite-element method to discretize the space problem, one obtains a set of differential-delay equations in time relating the potential to its normal derivative which is expressed in terms of the generalized coordinates of the structure. For oscillatory flow, the motion consists of sinusoidal oscillations around a steady, subsonic or supersonic flow. For fully unsteady flow, the motion is assumed to consist of constant subsonic or supersonic speed for time t or = 0 and of small perturbations around the steady state for time t 0.

Tseng, K.↗

NASA NTRS1974

SUSSA ACTS: A computer program for steady and unsteady, subsonic and supersonic aerodynamics for aerospace complex transportation systems

The computer program SUSSA ACTS (Steady and Unsteady, Subsonic and Supersonic Aerodynamics for Complex Transportation Systems) are presented in the final version. The numerical formulation and the description of the program and numerical results are included. In particular, generalized forces for fully unsteady (complex frequency) aerodynamics for a wing-body configuration, in both subsonic and supersonic flows, are discussed. The mathematical analysis includes completely arbitrary motion. The numerical implementation was limited to steady and oscillatory flows. A more general aerodynamic formulation in the form of a fully transient response for time-domain analysis and the aerodynamic transfer function (Laplace transform of the fully unsteady operator) for frequency-domain analysis is outlined.

Tseng, K.↗