Engineering Papers⌕ Search

Engineering topics

Truhlar, Donald G

Publications and source records attributed to Truhlar, Donald G.

At least 19 records

State-Selected Reaction of Muonium with Vibrationally Excited H2

Muonium (Mu) is considered the lightest isotope of the H atom. We report the rate constant for the Mu + H2(vibrational quantum number n = 1) → MuH + H reaction determined by measurements at 300 K and converged quantum mechanical calculations. The measurements are a sensitive probe of the high-curvature region in the entrance valley of the potential energy surface (PES), and thus provide a qualitatively different probe of the PES than that provided by any previous experiment. Comparisons are made with earlier results for D + H2(n = 1) and with the corresponding thermal reaction rates.

ANALYTICAL MECHANICS↗

Kinetics of the Reaction of the Heaviest Hydrogen Atom with H2, the 4Heμ + H2 -> 4HeμΗ + H Reaction: Experiments, Accurate Quantal Calculations, and Variational Transition State Theory, including Kinetic Isotope Effects for a Factor of 36.1 in Isotopic Mass

The neutral muonic helium atom {sup 4}He{mu}, in which one of the electrons of He is replaced by a negative muon, may be effectively regarded as the heaviest isotope of the hydrogen atom, with a mass of 4.115 amu. We report details of the first muon spin rotation ({mu}SR) measurements of the chemical reaction rate constant of {sup 4}He{mu} with molecular hydrogen, {sup 4}He{mu} + H{sub 2} {yields} {sup 4}He{mu}H + H, at temperatures of 295.5, 405, and 500 K, as well as a {mu}SR measurement of the hyperfine coupling constant of muonic He at high pressures. The experimental rate constants, k{sub He{mu}}, are compared with the predictions of accurate quantum mechanical (QM) dynamics calculations carried out on a well converged Born-Huang (BH) potential energy surface, based on complete configuration interaction calculations and including a Born-Oppenheimer diagonal correction. At the two highest measured temperatures the agreement between the quantum theory and experiment is good to excellent, well within experimental uncertainties that include an estimate of possible systematic error, but at 295.5 K the quantum calculations for k{sub He{mu}} are below the experimental value by 2.1 times the experimental uncertainty estimates. Possible reasons for this discrepancy are discussed. Variational transition state theory calculations with multidimensional tunneling have also been carried out for k{sub He{mu}} on the BH surface, and they agree with the accurate QM rate constants to within 30% over a wider temperature range of 200-1000 K. Comparisons between theory and experiment are also presented for the rate constants for both the D + H{sub 2} and Mu + H{sub 2} reactions in a novel study of kinetic isotope effects for the H + H{sub 2} reactions over a factor of 36.1 in isotopic mass of the atomic reactant.

08 HYDROGEN↗

Kinetic Isotope Effects for the Reactions of Muonic Helium and Muonium with H2

The neutral muonic helium atom may be regarded as the heaviest isotope of the hydrogen atom, with a mass of ~4.1 amu (4.1H), because the negative muon screens one proton charge. We report the reaction rate of 4.1H with 1H2 to produce 4.1H1H + 1H at 295 to 500 K. The experimental rate constants are compared with the predictions of accurate quantum mechanical dynamics calculations carried out on an accurate Born-Huang potential energy surface and with previously measured rate constants of 0.11H (where 0.11H is shorthand for muonium). Kinetic isotope effects can be compared for the unprecedentedly large mass ratio of 36. The agreement with accurate quantum dynamics is quantitative at 500 K, and variational transition state theory is used to interpret the extremely low (large inverse) kinetic isotope effects in the 10-4 to 10-2 range.

08 HYDROGEN↗

Convergent Partially Augmented Basis Sets for Post-Hartree-Fock Calculations of Molecular Properties and Reaction Barrier Heights

We present sets of convergent, partially augmented basis set levels corresponding to subsets of the augmented “aug-cc-pV(n+d)Z” basis sets of Dunning and co-workers. We show that for many molecular properties a basis set fully augmented with diffuse functions is computationally expensive and almost always unnecessary. On the other hand, unaugmented cc-pV(n+d)Z basis sets are insufficient for many properties that require diffuse functions. Therefore, we propose using intermediate basis sets. We developed an efficient strategy for partial augmentation, and in this article, we test it and validate it. Sequentially deleting diffuse basis functions from the “aug” basis sets yields the “jul”, “jun”, “may”, “apr”, etc. basis sets. Tests of these basis sets for Møller-Plesset second-order perturbation theory (MP2) show the advantages of using these partially augmented basis sets and allow us to recommend which basis sets offer the best accuracy for a given number of basis functions for calculations on large systems. Similar truncations in the diffuse space can be performed for the aug-cc-pVxZ, aug-cc-pCVxZ, etc. basis sets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binding Energy of d¹º Transition Metals to Alkenes By Wave Function Theory and Density Functional Theory

The structures of Pd(PH₃)₂ and Pt(PH₃)₂ complexes with ethene and conjugated CnH n+2 systems (n=4, 6, 8, and 10) were studied. Their binding energies were calculated using both wave function theory (WFT) and density functional theory (DFT). Previously it was reported that the binding energy of the alkene to the transition metal does not depend strongly on the size of the conjugated C n H n+2 ligand, but that DFT methods systematically underestimate the binding energy more and more significantly as the size of the conjugated system is increased. Our results show that recently developed density functionals predict the binding energy for these systems much more accurately. New benchmark calculations carried out by the coupled cluster method based on Brueckner orbitals with double excitations and a quasiperturbative treatment of connected triple excitations (BCCD(T)) with a very large basis set agree even better with the DFT predictions than do the previous best estimates. The mean unsigned error in absolute and relative binding energies of the alkene ligands to Pd(PH₃)₂ is 2.5 kcal/mol for the ωB97 and M06 density functionals and 2.9 kcal/mol for the M06-L functional. Adding molecular mechanical damped dispersion yields even smaller mean unsigned errors: 1.3 kcal/mol for the M06-D functional, 1.5 kcal/mol for M06- L-D, and 1.8 kcal/mol for B97-D and ωB97X-D. The new functionals also lead to improved accuracy for the analogous Pt complexes. These results show that recently developed density functionals may be very useful for studying catalytic systems involving Pd d¹º centers and alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled-surface investigation of the photodissociation of NH{sub 3}(A-tilde): Effect of exciting the symmetric and antisymmetric stretching modes

Using previously developed potential energy surfaces and their couplings, non-Born-Oppenheimer trajectory methods are used to study the state-selected photodissociation of ammonia, prepared with up to six quanta of vibrational excitation in the symmetric ({nu}{sub 1}) or antisymmetric ({nu}{sub 3}) stretching modes of NH{sub 3}(A-tilde). The predicted dynamics is mainly electronically nonadiabatic (that is, it produces ground electronic state amino radicals). The small probability of forming the excited-state amino radical is found, for low excitations, to increase with total energy and to be independent of whether the symmetric or antisymmetric stretch is excited; however some selectivity with respect to exciting the antisymmetric stretch is found when more than one quantum of excitation is added to the stretches, and more than 50% of the amino radical are found to be electronically excited when six quanta are placed in the antisymmetric stretch. These results are in contrast to the mechanism inferred in recent experimental work, where excitation of the antisymmetric stretch by a single quantum was found to produce significant amounts of excited-state products via adiabatic dissociation at total energies of about 7.0 eV. Both theory and experiment predict a broad range of translational energies for the departing H atoms when the symmetric stretch is excited, but the present simulations do not reproduce the experimental translational energy profiles when the antisymmetric stretch is excited. The sensitivity of the predicted results to several aspects of the calculation is considered in detail, and the analysis leads to insight into the nature of the dynamics that is responsible for mode selectivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermochemical Kinetics for Multireference Systems: Addition Reactions of Ozone

The 1,3-dipolar cycloadditions of ozone to ethyne and ethene provide extreme examples of multireference singlet-state chemistry, and they are examined here to test the applicability of several approaches to thermochemical kinetics of systems with large static correlation. Four different multireference diagnostics are applied to measure the multireference characters of the reactants, products, and transition states; all diagnostics indicate significant multireference character in the reactant portion of the potential energy surfaces. We make a more complete estimation of the effect of quadruple excitations than was previously available, and we use this with CCSDT/CBS estimation of Wheeler et al. (Wheeler, S. E.; Ess, D. H.; Houk, K. N. J. Phys. Chem. A 2008, 112, 1798.) to make new best estimates of the van der Waals association energy, the barrier height, and the reaction energy to form the cycloadduct for both reactions. Comparing with these best estimates, we present comprehensive mean unsigned errors for a variety of coupled cluster, multilevel, and density functional methods. Several computational aspects of multireference reactions are considered: (i) the applicability of multilevel theory, (ii) the convergence of coupled cluster theory for reaction barrier heights, (iii) the applicability of completely renormalized coupled cluster methods to multireference systems, (iv) the treatment by density functional theory, (v) the multireference perturbation theory for multireference reactions, and (vi) the relative accuracy of scaling-type multilevel methods as compared with additive ones. It is found that scaling-type multilevel methods do not perform better than the additive-type multilevel methods. Among the 48 tested density functionals, only M05 reproduces the best estimates within their uncertainty. Multireference perturbation theory based on the complete-active-space reference wave functions constructed using a small number of reaction-specific active orbitals gives accurate forward barrier heights; however, it significantly underestimates reaction energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Universal Solvation Model Based on Solute Electron Density and on a Continuum Model of the Solvent Defined by the Bulk Dielectric Constant and Atomic Surface Tensions

We present a new continuum solvation model based on the quantum mechanical charge density of a solute molecule interacting with a continuum description of the solvent. The model is called SMD, where the “D” stands for “density” to denote that the full solute electron density is used without defining partial atomic charges. “Continuum” denotes that the solvent is not represented explicitly but rather as a dielectric medium with surface tension at the solute-solvent boundary. SMD is a universal solvation model, where “universal” denotes its applicability to any charged or uncharged solute in any solvent or liquid medium for which a few key descriptors are known (in particular, dielectric constant, refractive index, bulk surface tension, and acidity and basicity parameters). The model separates the observable solvation free energy into two main components. The first component is the bulk electrostatic contribution arising from a self-consistent reaction field treatment that involves the solution of the nonhomogeneous Poisson equation for electrostatics in terms of the integral-equation-formalism polarizable continuum model (IEF-PCM). The cavities for the bulk electrostatic calculation are defined by superpositions of nuclear-centered spheres. The second component is called the cavity-dispersion-solvent-structure term and is the contribution arising from short-range interactions between the solute and solvent molecules in the first solvation shell. This contribution is a sum of terms that are proportional (with geometry-dependent proportionality constants called atomic surface tensions) to the solvent-accessible surface areas of the individual atoms of the solute. The SMD model has been parametrized with a training set of 2821 solvation data including 112 aqueous ionic solvation free energies, 220 solvation free energies for 166 ions in acetonitrile, methanol, and dimethyl sulfoxide, 2346 solvation free energies for 318 neutral solutes in 91 solvents (90 nonaqueous organic solvents and water), and 143 transfer free energies for 93 neutral solutes between water and 15 organic solvents. The elements present in the solutes are H, C, N, O, F, Si, P, S, Cl, and Br. The SMD model employs a single set of parameters (intrinsic atomic Coulomb radii and atomic surface tension coefficients) optimized over six electronic structure methods: M05-2X/MIDI!6D, M05-2X/6-31G*, M05-2X/6-31+G**, M05-2X/cc-pVTZ, B3LYP/6-31G*, and HF/6-31G*. Although the SMD model has been parametrized using the IEF-PCM protocol for bulk electrostatics, it may also be employed with other algorithms for solving the nonhomogeneous Poisson equation for continuum solvation calculations in which the solute is represented by its electron density in real space. This includes, for example, the conductor-like screening algorithm. With the 6-31G* basis set, the SMD model achieves mean unsigned errors of 0.6-1.0 kcal/mol in the solvation free energies of tested neutrals and mean unsigned errors of 4 kcal/mol on average for ions with either Gaussian03 or GAMESS.

36 MATERIALS SCIENCE↗

The muonic He atom and a preliminary study of the He-4 mu + H-2 reaction

The muonic atom 4Heu has the composition a++u-e-, and is formed by stopping negative muons in He doped with a small amount of NH3 (or Xe). It may be regarded as a unique heavy H-atom isotope with a mass of 4.1 amu. As such, the study of its chemical reaction rates and comparison with those of the well-known light Mu atom (0.113amu) allows unprecedented tests of kinetic isotope effects over a range of 36 in mass. As a first example, and one which is of most fundamental interest, we have begun kinetics studies of the Heu + H2 - HeuH + H reaction in the gas phase. The first measurements, at 295K, give a rate constant of kHei = 4:1 - 0:7 x 10-16 cm3 molec-1 s-1. In comparison, variational transition state calculations give a value of 2:46 x 10-16 cm3 molec-1 s-1, some what below the measurement, despite the large error bar, raising the possibility that the calculations, on a nessentially exact potential energy surface, have underestimated the amount of quantum tunneling involved, even for this heavyH-atom isotope.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Benchmark Energetic Data in a Model System for Grubbs II Metathesis Catalysis and Their Use for the Development, Assessment, and Validation of Electronic Structure Methods

We present benchmark relative energetics in the catalytic cycle of a model system for Grubbs second-generation olefin metathesis catalysts. The benchmark data were determined by a composite approach based on CCSD(T) calculations, and they were used as a training set to develop a new spin-component-scaled MP2 method optimized for catalysis, which is called SCSC-MP2. The SCSC-MP2 method has improved performance for modeling Grubbs II olefin metathesis catalysts as compared to canonical MP2 or SCS-MP2. We also employed the benchmark data to test 17 WFT methods and 39 density functionals. Among the tested density functionals, M06 is the best performing functional. M06/TZQS gives an MUE of only 1.06 kcal/mol, and it is a much more affordable method than the SCSC-MP2 method or any other correlated WFT methods. The best performing meta-GGA is M06-L, and M06-L/DZQ gives an MUE of 1.77 kcal/mol. PBEh is the best performing hybrid GGA, with an MUE of 3.01 kcal/mol; however, it does not perform well for the larger, real Grubbs II catalyst. B3LYP and many other functionals containing the LYP correlation functional perform poorly, and B3LYP underestimates the stability of stationary points for the cis-pathway of the model system by a large margin. From the assessments, we recommend the M06, M06-L, and MPW1B95 functionals for modeling Grubbs II olefin metathesis catalysts. The local M06-L method is especially efficient for calculations on large systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Limit of Accuracy of the Global Hybrid Meta Density Functional for Main-Group Thermochemistry, Kinetics, and Noncovalent Interactions

The hybrid meta density functionals M05-2X and M06-2X have been shown to provide broad accuracy for main group chemistry. In the present article we make the functional form more flexible and improve the self-interaction term in the correlation functional to improve its self-consistent-field convergence. We also explore the constraint of enforcing the exact forms of the exchange and correlation functionals through second order (SO) in the reduced density gradient. This yields two new functionals called M08-HX and M08-SO, with different exact constraints. The new functionals are optimized against 267 diverse main-group energetic data consisting of atomization energies, ionization potentials, electron affinities, proton affinities, dissociation energies, isomerization energies, barrier heights, noncovalent complexation energies, and atomic energies. Then the M08-HX, M08-SO, M05-2X, and M06-2X functionals and the popular B3LYP functional are tested against 250 data that were not part of the original training data for any of the functionals, in particular 164 main-group energetic data in 7 databases, 39 bond lengths, 38 vibrational frequencies, and 9 multiplicity-changing electronic transition energies. These tests include a variety of new challenges for complex systems, including large-molecule atomization energies, organic isomerization energies, interaction energies in uracil trimers, and bond distances in crowded molecules (in particular, cyclophanes). The M08-HX functional performs slightly better than M08-SO and M06-2X on average, significantly better than M05- 2X, and much better than B3LYP for a combination of main-group thermochemistry, kinetics, noncovalent interactions, and electronic spectroscopy. More important than the slight improvement in accuracy afforded by M08-HX is the conformation that the optimization procedure works well for data outside the training set. Problems for which the accuracy is especially improved by the new M08-HX functional include large-molecule atomization energies, noncovalent interaction energies, conformational energies in aromatic peptides, barrier heights, multiplicity-changing excitation energies, and bond lengths in crowded molecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mixed quantum/classical investigation of the photodissociation of NH{sub 3}(A-tilde) and a practical method for maintaining zero-point energy in classical trajectories

The photodissociation dynamics of ammonia upon excitation of the out-of-plane bending mode (mode {nu}{sub 2} with n{sub 2}=0,...,6 quanta of vibration) in the A-tilde electronic state is investigated by means of several mixed quantum/classical methods, and the calculated final-state properties are compared to experiments. Five mixed quantum/classical methods are tested: one mean-field approach (the coherent switching with decay of mixing method), two surface-hopping methods [the fewest switches with time uncertainty (FSTU) and FSTU with stochastic decay (FSTU/SD) methods], and two surface-hopping methods with zero-point energy (ZPE) maintenance [the FSTU/SD+trajectory projection onto ZPE orbit (TRAPZ) and FSTU/SD+minimal TRAPZ (mTRAPZ) methods]. We found a qualitative difference between final NH{sub 2} internal energy distributions obtained for n{sub 2}=0 and n{sub 2}>1, as observed in experiments. Distributions obtained for n{sub 2}=1 present an intermediate behavior between distributions obtained for smaller and larger n{sub 2} values. The dynamics is found to be highly electronically nonadiabatic with all these methods. NH{sub 2} internal energy distributions may have a negative energy tail when the ZPE is not maintained throughout the dynamics. The original TRAPZ method was designed to maintain ZPE in classical trajectories, but we find that it leads to unphysically high internal vibrational energies. The mTRAPZ method, which is new in this work and provides a general method for maintaining ZPE in either single-surface or multisurface trajectories, does not lead to unphysical results and is much less time consuming. The effect of maintaining ZPE in mixed quantum/classical dynamics is discussed in terms of agreement with experimental findings. The dynamics for n{sub 2}=0 and n{sub 2}=6 are also analyzed to reveal details not available from experiment, in particular, the time required for quenching of electronic excitation and the adiabatic energy gap and geometry at the time of quenching.

74 ATOMIC AND MOLECULAR PHYSICS↗

Perspective on Foundations of Solvation Modeling: The Electrostatic Contribution to the Free Energy of Solvation

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Solvation effects are essential components of all liquid-state chemistry, and it is impossible to understand liquid-phase organic, biological, or inorganic chemistry without including them. The Nobel-Prize-winning gas-phase quantum mechanical electronic structure methods of Pople1 and Kohn et al.2 require the additional inclusion of solvent for reliably addressing problems in liquid-phase chemistry. Methods that include the solvent implicitly are especially powerful because they allow one to retain the minimal representation of the solute, thereby facilitating progress with quantum mechanical calculations at the same high levels as those used in the gas phase,3,4 and because they allow one to model the solvent with the correct bulk permittivity. Reliable calculations of solutes in solution must take account of electrostatics, cavitation, dispersion, and solvent structure, but solvation effects are frequently dominated by electrostatics. Therefore, achieving a solid understanding of electrostatic solvation effects is an excellent starting point for understanding solvation and improving solvation models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Construction of a Generalized Gradient Approximation by Restoring the Density-gradient Expansion and Enforcing a Tight Lieb-Oxford Bound

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Recently, a generalized gradient approximation (GGA) to the density functional, called PBEsol, was optimized (one parameter) against the jellium-surface exchange-correlation energies, and this, in conjunction with changing another parameter to restore the first-principles gradient expansion for exchange, was sufficient to yield accurate lattice constants of solids. Here, we construct a new GGA that has no empirical parameters, that satisfies one more exact constraint than PBEsol, and that performs 20% better for the lattice constants of 18 previously studied solids, although it does not improve on PBEsol for molecular atomization energies (a property that neither functional was designed for). The new GGA is exact through second order, and it is called the second-order generalized gradient approximation (SOGGA). The SOGGA functional also differs from other GGAs in that it enforces a tighter Lieb–Oxford bound. SOGGA and other functionals are compared to a diverse set of lattice constants, bond distances, and energetic quantities for solids and molecules (this includes the first test of the M06-L meta-GGA for solid-state properties). We find that classifying density functionals in terms of the magnitude µ of the second-order coefficient of the density gradient expansion of the exchange functional not only correlates their behavior for predicting lattice constants of solids versus their behavior for predicting small-molecule atomization energies, as pointed out by Perdew and co-workers

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmark Data for Interactions in Zeolite Model Complexes and Their Use for Assessment and Validation of Electronic Structure Methods

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. We present benchmark binding energies for five zeolite model complexes, with four of the adsorbates bound noncovalently and one covalently. The binding energies were determined as the sum of the infinite-basis-set limit of Møller-Plesset second-order perturbation theory (MP2) energies and a CCSD(T) correction term evaluated with the aug-cc-pVDZ basis set. The basis set limit of MP2 energies was determined by two-point extrapolation using the aug-cc-pVXZ basis sets for X ) D and T and separate extrapolation of the Hartree- Fock and correlation energies. We found that correlation contributions beyond MP2 to the final binding energies are small; their magnitude is in the range of 0.02-1.0 kcal/mol. For the MP2 method to describe the interactions in these zeolite model systems accurately, one needs to use a basis set at least the size of aug-cc-pVTZ in conjunction with counterpoise corrections. Final binding energies (kcal/mol) of the model complexes are in the range of 3.5-19.5 kcal/mol, and they were used as reference data to test 6 wave function methods and 41 density functionals. Among the tested density functional methods, M06-L/6-31+G(d,p) gives a mean unsigned error (MUE) without counterpoise correction of 0.87 kcal/mol. With counterpoise corrections, the M06-2X and M05-2X functionals give the best performance. The MUE with counterpoise corrections for the M06-2X/6-311+G(2df,2p)//MP2/6-311+G(2df,2p) level of theory is 0.39 kcal/mol. With the DFT/6-31+G- (d,p) geometries and the 6-311+G(2df,2p) basis set, M05-2X and M06-2X give MUEs with counterpoise corrections of 0.40 and 0.52 kcal/mol, respectively. Tests against the binding energies of four complexes (two noncovalent and two covalent) of the adsoption of isobutene on a large 16T zeolite model cluster confirmed that M06-L, M06, M05-2X, and M06-2X are very promising quantum mechanical methods for hybrid quantum mechanical/molecular mechanical (QM/MM) simulations of zeolites. In fact the performance of these four Minnesota functionals, as compared to other high-quality functionals, is relatively even better for the larger 16T clusters than for the smaller 3T ones.

2-METHYLPROPENE↗

A Prototype for Graphene Material Simulation: Structures and Interaction Potentials of Coronene Dimers

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Graphene sheets are the building blocks of carbon nanotubes and a variety of functionalized nanomaterials. Methods to be used for computer-aided design of such materials or for the study of aromatic-aromatic interactions in biopolymers and other soft materials should be validated for smaller systems where reliable estimates of interaction energies are available. In this work, we first validated the M06-2X functional against the S22 database of noncovalent interaction energies of biological importance. We then applied the M06-2X functional to study aromatic-aromatic interactions in coronene dimers. We located six stationary points on the potential energy surface of coronene dimer, we calculated the potential energy curves for the sandwich, T-shaped, and parallel-displaced configurations of this prototype of aromatic-aromatic interactions, and we found that a parallel displaced configuration is the global minimum. The potential curves for the coronene dimers will aid the development of new force fields and potential energy functions that are computationally efficient and capable of modeling large graphene or aromatic clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational characterization and modeling of buckyball tweezers: density functional study of concave–convex π•••π interactions

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The geometries and binding energies of a recent buckyball tweezers (C60H28) and its supramolecular complexes are investigated using recently developed density functionals (M06-L and M06-2X) that include an accurate treatment of medium-range correlation energy. The pincer part of the tweezers, corannulene, has a strong attractive interaction with C60. However, due to the entropy penalty, the calculated gas-phase free energy of association of the C60@corannulene supramolecule is positive 3.5 kcal mol-1; and this entropy penalty explains why it is difficult to observe C60@corannulene supramolecule experimentally. By using a p-extended tetrathiafulvalene (TTF), in particular 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene (TTFAQ or C20H10S4), as the pincer part, we modeled a new buckyball tweezers. The geometries and binding energies of the new buckyball tweezers and its supramolecular complexes are also calculated. Due to fact that the attractive interaction between TTFAQ and C60 is weaker than that between corannulene and C60, the gas-phase binding free energy in the C60@C60H 32S8 supramolecular complex is smaller than that in the C60@C60H28 supramolecule. We also discuss solvent effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How Well Can New-Generation Density Functionals Describe the Energetics of Bond-Dissociation Reactions Producing Radicals?

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The performance of various density functionals has been tested for three sets of reaction energies involving radicals. It is shown that two recently designed functionals, M05-2X and M06-2X, provide the best performance. These functionals provide useful and affordable methods for future mechanistic studies involving organic radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗