Engineering Papers⌕ Search

Engineering topics

Trombka, J. I.

Publications and source records attributed to Trombka, J. I..

At least 55 records · Page 3

Method and apparatus for mapping the distribution of chemical elements in an extended medium

Contaminants in an extended medium such as the wall of a building are mapped by locating neutron excitation source on one side of the wall and a gamma ray spectrometer, including a gamma ray detector on the opposite side of the wall facing the excitation source. The source and detector are moved in unison in discrete steps over opposing wall surfaces so as to determine the chemical composition of the elements in a hemispheric region of the wall adjacent the detector with the radius of the region being substantially that of the mean free path distance of gamma rays emitted from elements interacting with neutrons on the detector side of the wall. The source and detector are reversed for relatively thick walls for mapping the distribution of elements on the other side of the wall thickness. The output of the detector is fed to a multichannel pulse height analyzer where the intensity of the various gamma ray spectral lines are indicated relative to a dominant constituent element such as silicon. Resolution of anomalies such as the presence of voids and/or determining the bulk density of the medium is achieved by substituting a gamma ray source technique is also applied to metal alloys, such as iron alloys, in either the solid or molten state.

Evans, L. G.↗

Neutron Probe of Building-Wall Composition

Walls of historic buildings charted by neutron radiography. Neutron source and Gamma-Ray Detector alined with each other yield map of composition of wall. Points spaced for minimal overlap based on mean free path of gamma rays emitted from wall materials. Map indicates nature and extent of changes in building materials so proper treatment is applied.

Trombka, J. I.↗

Tomographic and analog 3-D simulations using NORA

The results of two computer simulations demonstrate the feasibility of using the nonoverlapping redundant array (NORA) to form three-dimensional images of objects with X-rays. Pinholes admit the X-rays to nonoverlapping points on a detector. The object is reconstructed in the analog mode by optical correlation and in the digital mode by tomographic computations. Trials were run with a stick-figure pyramid and extended objects with out-of-focus backgrounds. Substitution of spherical optical lenses for the pinholes increased the light transmission sufficiently that objects could be easily viewed in a dark room. Out-of-focus aberrations in tomographic reconstruction could be eliminated using Chang's (1976) algorithm.

Yin, L. I.↗

A balloon-borne high-resolution spectrometer for observations of gamma-ray emission from solar flares

The design, development, and balloon-flight verification of a payload for observations of gamma-ray emission from solar flares are reported. The payload incorporates a high-purity germanium semiconductor detector, standard NIM and CAMAC electronics modules, a thermally stabilized pressure housing, and regulated battery power supplies. The flight system is supported on the ground with interactive data-handling equipment comprised of similar electronics hardware. The modularity and flexibility of the payload, together with the resolution and stability obtained throughout a 30-hour flight, make it readily adaptable for high-sensitivity, long-duration balloon fight applications.

Crannell, C. J.↗

X-ray imaging of extended objects using nonoverlapping redundant array

A common problem associated with X-ray imaging using coded apertures is the reconstruction of low-intensity extended objects. In the decoding of such objects, the overlapping images from the multiple pinholes give rise to noise cross talk and, in many cases, also to signal cross talk. In this paper, an alternate approach is proposed based on the principle used in an earlier (Yin et al., 1980) laboratory device for the real-time viewing of X-ray objects. It is shown that with this approach, the nonoverlapping redundant array, the sidelobes in the point spread function are not eliminated but merely displaced through a suitable choice of geometry. In this manner, the sidelobes no longer contribute to the background in the vicinity of a reconstructed image, and both signal and noise cross talks are completely eliminated. It may now be possible to reconstruct extended X-ray objects in 3-D by simple optical correlation and tomographically by a computer.

Yin, L.-I.↗

A small, battery-operated fluoroscopic system - Lixiscope with X-ray generator

A small, battery-operated X-ray generator has been developed to be used as part of a small-format fluoroscopic system, the Lixiscope (Low Intensity X-ray Imaging Scope). The X-ray generator consists of a grounded rod-anode X-ray tube with a 0.2 mm focal spot and a specially designed, battery-operated, 0 to -80 kV high-voltge supply. Total power consumption is about 10 W. The fine focal spot, in conjunction with the continuously variable X-ray intensity and spectral distribution, helps to extend both the versatility and the performance of the Lixiscope toward a much wider range of terrestrial and spacecraft applications. The complete fluoroscopic system is described, and some examples of possible applications are shown.

Yin, L. I.↗

Gamma Ray Astrophysics: New insight into the universe

Gamma ray observations of the solar system, the galaxy and extragalactic radiation are reported. Topics include: planets, comets, and asteroids; solar observations; interstellar medium and galactic structure; compact objects; cosmology; and diffuse radiation. The instrumentation used in gamma ray astronomy in covered along with techniques for the analysis of observational spectra.

Fichtel, C. E.↗

A hard X ray and soft gamma ray telescope spectrometer

A telescope spectrometer in the hard X-ray and soft gamma-ray region from 30 keV to 200 keV can provide significant information in investigations related to solar physics and planetary science. The present study is concerned with the preliminary design of such an instrument, taking into account a use of the Low Intensity X-ray Imaging Scope (Lixiscope). In the design of the considered telescope spectrometer, attention would have to be given to three major components, including the X-ray and gamma-ray input optics, an imaging detector-spectrometer, and an output processor. The preliminary results provided by the present study indicate that, in principle, a complete hard X-ray and soft gamma-ray telescope imaging spectrometer system using the Lixiscope is feasible. However, much work remains to be done with respect to the optimization and improvement of the system for future flight applications.

Yin, L. I.↗

Three-dimensional imaging of X-ray and gamma-ray objects in real time

A simple device is described that is capable of providing real-time 3-D viewing of extended X-ray and gamma-ray objects. The visible-light images produced by the device are not merely stereoscopic, i.e., one perspective, but possess both horizontal and vertical parallax with a reasonably large field of view.

Yin, L. I.↗

New position-sensitive hard X-ray spectrometer

The design and features of a new prototype Lixiscope (Low intensity X-ray imaging scope) is described. It is shown that in addition to good spatial and temporal resolution in the 20 keV to 200 keV region, it is capable of single-photon counting, imaging as well as good energy resolution. It is concluded that the device is well suited for future low-flux applications in astronomy, medicine, and industry.

Yin, L. I.↗

The distance and spectrum of the Apollo gamma-ray burst

The gamma-ray spectrometer on Apollo 16 obtained spectral information with good energy resolution from more than 2500 burst photons in the energy range 0.06-5.16 MeV. The spectrum from 1 keV to 2 MeV, observed at X-ray energies by the Apollo X-ray spectrometer, is fitted by a thermal bremsstrahlung spectrum with kT = 500 keV. The success of the fit implies that the source is optically thin, and it follows that it must be closer than 50 pc. Absence of spectral variability suggests that the burst results from isothermal changes in emission measure.

Gilman, D.↗

The galactic gamma-ray flux in the 0.06-5 MeV range

The observed variation of the 72-200-keV count rate in the Apollo gamma-ray spectrometer on Apollo 16 are interpreted as being due to cosmic gamma rays associated with the Crab Nebula, Cyg X-1, and the galactic-center source. A low-resolution map is presented which shows a great enhancement in the galactic-center region; a spectrum for this region is obtained. The shape of the spectrum suggests that the emission originates from an ensemble of discrete sources. It is concluded that the gamma-ray line at 4.4 MeV is not emitted as a constant fraction of the continuum in the whole region of the galactic plane between longitudes of -50 and +22 deg.

Gilman, D.↗

A low-energy gamma-ray imaging detector

We describe a hard-X-ray/soft-gamma-ray imaging detector, incorporating a microchannel-plate (MCP) electron multiplier for possible use in future telescopes. In contrast to previous attempts using MCP's this approach promises to achieve high quantum detection efficiencies in addition to high spatial and temporal resolution. Preliminary results indicate not only the capability of simultaneous imaging and single-photon counting, but also coarse energy resolution.

Yin, L. I.↗

Neutron-gamma techniques for planetary exploration

Chemical analysis of planetary surfaces is necessary for the understanding of the origin and evolutionary processes of the solar system. Orbital lunar geochemical experiments performed during the Apollo 15 and 16 demonstrated that even with a low neutron flux (fast and thermal), reliable results could be extracted. The possibility of using a compact 14 MeV neutron generator for geochemical analysis of planetary surfaces, comets and asteroids is currently studied. This method allows the determination of bulk chemical composition, even in the presence of an atmosphere. This would be possible on the surface of Venus, for example, where alternate methods such as sample return are impractical. This method can be used for continuous monitoring of elemental abundances from a roving vehicle, for example, on the surface of Mars.

Johnson, R. G.↗

The galactic gamma-ray flux in the 0.06 to 5 MeV range

Gamma ray emission from the longitude range -50 deg less than or equal to lambda less than or equal to 22 deg recorded by the Apollo gamma-ray spectrometer and by individual observers is discussed. Agreement of the galactic emission spectra near 1 MeV with hard X-ray observations of the galactic central regions suggests that an ensemble of point sources is responsible for the emissions. Apollo 16 upper limits to the cosmic 4.4 MeV line flux imply that the ratio of line strength to continuum emission for the region observed by Haymes et al is higher than the galactic average.

Gilman, D. A.↗

Measurements of 15.11-MeV gamma-ray flux produced in the reactions C-12(p, p')-C-12*(15.11 MeV) and O-16(p, p' alpha)-C-12*(15.11 MeV)

The flux of 15.11 MeV gamma rays relative to the flux of 4.44 MeV gamma rays which are emitted from the corresponding states of C-12 are a sensitive measure of the spectrum of exciting particles in solar flares and other cosmic sources. Emission of 15.11 MeV gamma rays may result not only from the direct excitation of C-12 but also from the interaction O-16 (p,p' alpha) C-12* sup 15.11 MeV. Although the cross sections for the direct reaction was studied extensively, the cross section for the spallation interaction with O-16 is not reported in the literature. Preliminary measurements demonstrated the feasibility of measuring the production of 15.11 MeV gamma rays by proton interactions with O-16 using the University of Maryland cyclotron facility. For both carbon and oxygen targets the flux of 15.11 MeV gamma rays is being measured relative to the flux of 4.44 MeV gamma rays. The gamma ray emission from de-excitation of the giant dipole resonances is being measured.

Lapides, J. R.↗

Future progress in the development of the Lixiscope

Some of the potential of the lixiscope in astrophysics as well as in space medicine are reported. The positioning of the lixiscope as a sensitive detector placed at the focal plane of a focusing or collimating X-ray telescope, and studies of the inter-coastal spacing during weightlessness are described.

Trombka, J. I.↗

Gamma-ray Astrophysics: a New Look at the Universe

Gamma-ray astronomy which includes the spectral region from above approximately 100 keV to greater than or equal to 1000 GeV permits investigation of the most energetic photons originating in our galaxy and beyond and provides the most direct means of studying the largest transfers of energy occurring in astrophysical processes. Of all the electromagnetic spectrum, high-energy gamma-ray astronomy measures most directly the presence and dynamic effects of the energetic charged cosmic ray particles, element synthesis, and particle acceleration. Further, gamma rays suffer negligible absorption or scatterings as they travel in straight paths; hence, they may survive billions of years and still reveal their source. The high energy processes in stellar objects (including our Sun), the dynamics of the cosmic-ray gas, the formation of clouds and nebulae, galactic evolution and even certain aspects of cosmology and the origin of the universe may be explored by gamma-ray observations.

Trombka, J. I.↗