Alkyl Coordination in meso -(ONO) 2– Supported Uranium(IV) Complexes
Not Available
Engineering topics
Publications and source records attributed to Tondreau, Aaron M..
Not Available
Related BAP [BAP = bis(acyl)phosphide] and Acac (Acac = β-diketonate) molecules perform as robust supports for both lanthanide and actinide metals. Here, a molecular bimetallic Eu 2+ complex was successfully targeted and isolated by employing sodium bis(mesitoyl)phosphide [Na( mes BAP)] in a salt metathesis with EuI 2 , producing [Eu( mes BAP) 2 (et 2 o)] 2 (et 2 o = metal-coordinated diethyl ether). The corresponding Acac-Eu 2+ complex was targeted using mes Acac– (1,3-dimesityl-1,3-propanedione), generating [Eu( mes Acac) 2 (et 2 o)] 2 . Both complexes were characterized by single-crystal X-ray diffraction, UV–vis, IR, and NMR spectroscopies, and variable-temperature magnetic susceptibility. [Eu( mes BAP) 2 (et 2 o)] 2 was persistent under anaerobic, anhydrous conditions, whereas the analogous [Eu( mes Acac) 2 (et 2 o)] 2 showed evidence of decomposition under identical conditions. Finally, variable-temperature magnetic susceptibility and magnetization studies of [Eu( mes BAP) 2 (et 2 o)] 2 and [Eu( mes Acac) 2 (et 2 o)] 2 were performed, resulting in similar magnetic exchange coupling values of J ex = –0.018 and –0.023 cm –1 and axial zero-field-splitting D values of –0.38 and –0.51 cm –1 , respectively.
Here, we report the synthesis and characterization of substituted aryldimethylsilyldiisopropylanilide ligands and their respective bisamido complexes of U(III), (3,5-R 2 -PhMe 2 SiNDipp) 2 UI(dioxane) x (1, R = H, x= 0; 2, R = Me, x = 0; 3, R = t Bu, x = 1). We found that the steric bulk of the 3,5-R 2 -Ph ring affects the hapticity of the U–arene interaction. In the solid-state, 1 is a U–(η 6 -arene) complex, while 2 is a bis(U–(η 1 -arene)) complex. Theoretically calculated bond orders at PBE0 and PBE0-D3 levels of theory support these hapticity assignments. The 3,5- t Bu 2 -Ph rings of 3 are too bulky to interact with U and solid-state metrical parameters initially suggested a U–(η 1 -arene) interaction with one of the Dipp rings. However, bond order calculations show that this interaction is even weaker than in the previously reported ((PhMe 2 Si) 2 N) 3 U complex, leading to the conclusion that 3 is best described as a U–(η o -arene) complex. Molecular orbital analyses in conjunction with electron localization methods reveal that the U–(η 6 -arene) bonding in 1 is primarily electrostatic in nature. Some charge transfer takes place from the arene π orbitals to the U 6d/5f hybrid orbitals in addition to subtle δ-back-bonding. In 2 and 3, both π and δ interactions are substantially weaker, in agreement with the differences in the U–arene coordination modes. Surprisingly, attempts to generate less sterically bulky (3,5-R 2 -PhMe 2 SiNPh) 2 UI complexes results in disproportionation to homoleptic tetraamido (3,5-R 2 -PhMe 2 SiNPh) 4 U(IV) (4, R = H; 5, R = Me) complexes.
A template methodology was employed as an entryway into diastereopure U( iv ) and Np( iv ) organometallic complexes, and the 5f orbital contributions to bonding were determined.
A new dianionic bis(amino)phosphine ligand was synthesized and the corresponding metallacyclohexane complexes of Y, La, and Lu were studied using NMR experiments.
Not Available
Not Available
Not Available
A series of bis(acyl)phosphide-supported Eu complexes were synthesized (bis(acyl)phosphide = BAP). Here, in this study, BAP ligands proved to be excellent ligands for the synthesis of both Eu 3+ and Eu 2+ molecular complexes. Sodium bis(mesitoyl)phosphide (Na( mes BAP)) and sodium bis(2,4,6-triisopropylbenzoyl)phosphide (Na( tripp BAP)) were employed as ligand precursors for the synthesis of the Eu 3+ complexes Eu(bis(mesitoyl)phosphide) 3 (thf) 2 (Eu( mes BAP) 3 (thf) 2 ) and Eu(bis(2,4,6-triisopropylbenzoyl)phosphide) 3 (Eu( tripp BAP) 3 ), as well as the Eu 2+ complex, Eu(bis(2,4,6-triisopropylbenzoyl)phosphide) 2 (dme) 2 (Eu( tripp BAP) 2 (dme) 2 ) (thf = tetrahydrofuran, dme = 1,2-dimethoxyethane). All complexes were characterized using a combination of UV–vis–NIR–IR and NMR spectroscopies, and single-crystal X-ray diffraction (SC-XRD). The magnetic properties of these three monomeric Eu complexes were investigated by variable-temperature magnetic susceptibility. The magnetic data are typical for these ions, with Eu( tripp BAP) 2 (dme) 2 displaying Curie-type behavior. Both Eu( tripp BAP) 3 and Eu( mes BAP) 3 (thf) 2 possess similar 7 F 0 - 7 F 1 spin–orbit energy gaps and a similar zero-field splitting of the 7 F 1 state.
Here, the first uranium bis(acyl)phosphide (BAP) complexes were synthesized from the reaction between sodium bis(mesitoyl)phosphide (Na( mes BAP)) or sodium bis(2,4,6-triisopropylbenzoyl)phosphide (Na( tripp BAP)) and UI 3 (1,4-dioxane) 1.5 . Thermally stable, homoleptic BAP complexes were characterized by single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopy, when appropriate, for the elucidation of the electronic structure and bonding of these complexes. EPR spectroscopy revealed that the BAP ligands on the uranium center retain a significant amount of electron density. The EPR spectrum of the trivalent U( tripp BAP) 3 has a rhombic signal near g = 2 (g 1 = 2.03; g 2 = 2.01; and g 3 = 1.98) that is consistent with the EPR-observed unpaired electron being located in a molecular orbital that appears ligand-derived. However, upon warming the complex to room temperature, no resonance was observed, indicating the presence of uranium character.
Abstract A method to explore head‐to‐head ϕ back‐bonding from uranium f‐orbitals into allyl π* orbitals has been pursued. Anionic allyl groups were coordinated to uranium with tethered anilide ligands, then the products were investigated by using NMR spectroscopy, single‐crystal XRD, and theoretical methods. The (allyl)silylanilide ligand, N ‐((dimethyl)prop‐2‐enylsilyl)‐2,6‐diisopropylaniline (LH), was used as either the fully protonated, singly deprotonated, or doubly deprotonated form, thereby highlighting the stability and versatility of the silylanilide motif. A free, neutral allyl group was observed in UI 2 (L1) 2 ( 1 ), which was synthesized by using the mono‐deprotonated ligand [K][ N ‐((dimethyl)prop‐2‐enyl)silyl)‐2,6‐diisopropylanilide] (L1). The desired homoleptic sandwich complex U[L2] 2 ( 2 ) was prepared from all three ligand precursors, but the most consistent results came from using the dipotassium salt of the doubly deprotonated ligand [K] 2 [ N ‐((dimethyl)propenidesilyl)‐2,6‐diisopropylanilide] (L2). This allyl‐based sandwich complex was studied by using theoretical techniques with supporting experimental spectroscopy to investigate the potential for phi (ϕ) back‐bonding. The bonding between U IV and the allyl fragments is best described as ligand‐to‐metal electron donation from a two carbon fragment‐localized electron density into empty f‐orbitals.
The addition of 2 equiv of t Bu 2 PSiMe 3 to 2,6-pyridinedicarboxaldehyde ((CHO) 2 Py) results in a rac / meso diastereomeric mixture of the PNP-chelating ligand 2,6-bis((trimethylsiloxy)(di- tert -butylphosphino)-methyl)-pyridine ( (OTMS) PNP t Bu ) ( 1 - r / m ) via addition of the P–Si bond across both of the aldehyde C–O bonds. Chelation of (OTMS) PNP t Bu to FeCl 2 results in the same diastereotopic ratio of ( (OTMS) PNP t Bu )FeCl 2 ( 2- r / m ) as the free ligand. Fractional crystallization allows for the isolation of the C 2 isomer, 2- r , and a template synthesis protocol allows for the synthesis and isolation of the C s isomer, 2- m , in good yield. Furthermore, the template synthesis protocol was also expanded to the f -block with the use of UCl 4 in order to assess the specificity of the template synthesis on a larger metal cation. This reaction performed on UCl 4 forms the meso diastereospecific uranium complex ( ( t Bu2P) ONO)UCl 2 (dtbpy), 3 - m , with observation of the rational intermediate ( (OTMS) PNO t Bu )UCl 3 (dtbpy), 4 - m , which arose from the respective formation of two- or one-equivalents of TMS–Cl and formation of the corresponding U–O bond.
Non-aqueous redox flow batteries (RFBs) have been gaining increased attention in the energy storage arena. Some of their attractive features include the promise for high energy densities, wider voltage windows compared to aqueous systems, as well as wider operating temperature ranges. One of the major challenges in the development of these systems is the lack of electroactive materials that can undergo reversible redox events within the larger potential window of organic solvents. In this paper, we present the design, synthesis, and measurement of electrochemical properties of some iron-based imine- and iminopyridine complexes as promising candidates for RFB applications. Synthesized complexes afforded three reversible redox couples over a ~3 V range. The redox events were also computationally explored and are in good agreement with experimental data. Theoretical calculations show that the redox event at the positive potential can be characterized as metal-centered event corresponding to Fe 3+ → Fe 2+ reduction, while the two redox events at negative potentials are associated with the consecutive reductions of iminopyridine or diimine moieties. This work has led to the identification of a promising anolyte material, [tris(imino)pyridine)Fe][OTf] 2 (1), which is soluble in acetonitrile and is synthesized in two simple steps. This species shows outstanding performance when cycled between 1.0 V and 2.35 V, with 93% coulombic efficiency, 84% energy efficiency, and a capacity decay rate of 0.61% per cycle at 5 mA cm –2 . Further modifications to this kind of charge carrier may lead to the development of high energy density materials for grid scale energy storage applications.
This work provides new routes for the conversion of U( iv ) into U( vi ) bis(imido) complexes and offers new information on the manner in which the U( vi ) compounds form.
Herein we describe the synthesis of a series of nickel complexes, including the formation of [( iPr PN H P)Ni(PMe 3 )][BPh 4 ] ( iPr PN H P = HN(CH 2 CH 2 (PiPr 2 )) 2 ). The ability of this phosphine complex to perform the 1,2-addition of H 2 O to produce the Ni–OH species [( iPr PN H P)NiOH][BPh 4 ] has been investigated. The nucleophilicity of the hydroxide moiety of both [(iPrPNHP)NiOH][BPh4] and the previously reported ( iPr PN H P)MnOH(CO) 2 was investigated through the hydration of aryl and alkyl nitriles, leading to the formation of a number of metal carboxamide (RC(O)NH–) bonds. This reactivity generated complexes with the general structures of [( iPr PN H P)Ni(NHC(O)R)][BPh 4 ] for nickel and ( iPr PN H P)Mn(NHC(O)R)(CO) 2 for manganese. Under catalytic conditions, the hydration of nitriles using nickel complexes yielded only a single turnover. However, ( iPr PN H P)MnOH(CO) 2 produced several turnovers, and the reaction conditions were probed for optimization.
A series of uranium amides were synthesized from N,N,N-cyclohexyl(trimethylsilyl)lithium amide [Li][N(TMS)Cy] and uranium tetrachloride to give U(NCySiMe 3 ) x (Cl) 4–x , where x = 2, 3, or 4. The diamide was then isolated as a bimetallic, bridging lithium chloride adduct ((UCl 2 (NCyTMS) 2 ) 2 -LiCl(THF) 2 ), and the tris(amide) was isolated as the lithium chloride adduct of the monometallic species (UCl(NCyTMS) 3 -LiCl(THF) 2 ). The tetraamide complex was isolated as the four-coordinate pseudotetrahedron. Cyclic voltammetry revealed an easily accessible reversible oxidation wave, and upon chemical oxidation, the U V amido cation was isolated in near-quantitative yields. The synthesis of this family of compounds allows a direct comparison of the electronic structure and properties of isostructural U IV and U V tetraamide complexes. Spectroscopic investigations consisting of UV–vis, NIR, MCD, EPR, and U L 3 -edge XANES, along with density functional and wave function calculations, of the four-coordinate U IV and U V complexes have been used to understand the electronic structure of these pseudotetrahedral complexes.
( iPr PN H P)Mn(CO) 2 (OH) (2; iPr PN H P = HN{CH 2 CH 2 (P i Pr 2 )} 2 ) was formed from the reversible 1,2-addition of water to ( iPr PNP)Mn(CO) 2 (1; iPr PNP = the deprotonated, amide form of the ligand, –N{CH 2 CH 2 (P i Pr 2 )} 2 ). This reversible reaction was probed via variable-temperature NMR experiments, and the energetics of the 1,2-addition/elimination was found to be slightly exothermic (-0.8 kcal/mol). The corresponding manganese hydroxide was found to react with aldehydes, yielding the corresponding manganese carboxylate complexes ( iPr PN H P)Mn(CO) 2 (CO 2 R), where R = H, methyl, phenyl. While no reaction between 1 and neat benzaldehyde was observed, in the presence of water, conversion to the corresponding manganese-bound benzoate with formation of H 2 was observed. The catalytic oxidation of benzaldehyde by water without additives was unsuccessful due to strong product inhibition, with the manganese benzoate formed under a variety of reaction conditions. Upon addition of base, a catalytic cycle for the conversion of aldehyde to carboxylate and hydrogen can be devised.