Engineering Papers⌕ Search

Engineering topics

Toma, Francesca M.

Publications and source records attributed to Toma, Francesca M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Technoeconomic Model and Pathway to <$2/kg Green Hydrogen Using Integrated Halide Perovskite Photoelectrochemical Cells

The cost of gray hydrogen produced via fossil fuel-based steam-methane reforming has led the U.S. Department of Energy to specify <$\$$2/kg H 2 as a target for commercially competitive green hydrogen generation methods. Integrated photoelectrochemical cells have been proposed as a solar-to-hydrogen conversion technology. In this paper we describe a technoeconomically feasible pathway to reaching <$\$$2/kg green H 2 using integrated photoelectrochemical cells with halide perovskite photoabsorbers, low-cost conductive barriers, and low precious metal-content catalysts in an aqueous, membrane-separated cell. A base-case solar-to-hydrogen conversion efficiency of 20%, stable lifetime of 10 years, and a combined electrocatalyst-plus-panel cost of $\$$50/m 2 enabled a levelized cost of hydrogen of $\$$2.43/kg, which dropped below $\$$2/kg with improved performance metrics including material cost, improvements in process design, or subsidies. We relate these metrics to lab-scale reports to recommend best research practices for scientists and funding agencies working at this intersection of photovoltaics, electrocatalysis, and surface science.

$1/kg↗
DOE OSTI2023

Organometal Halide Perovskite‐Based Photoelectrochemical Module Systems for Scalable Unassisted Solar Water Splitting

Despite achievements in the remarkable photoelectrochemical (PEC) performance of photoelectrodes based on organometal halide perovskites (OHPs), the scaling up of small-scale OHP-based PEC systems to large-scale systems remains a great challenge for their practical application in solar water splitting. Significant resistive losses and intrinsic defects are major obstacles to the scaling up of OHP-based PEC systems, leading to the PEC performance degradation of large-scale OHP photoelectrodes. Herein, a scalable design of the OHP-based PEC systems by modularization of the optimized OHP photoelectrodes exhibiting a high solar-to-hydrogen conversion efficiency of 10.4% is suggested. As a proof-of-concept, the OHP-based PEC module achieves an optimal PEC performance by avoiding major obstacles in the scaling up of the OHP photoelectrodes. The constructed OHP module is composed of a total of 16 OHP photoelectrodes, and a photocurrent of 11.52 mA is achieved under natural sunlight without external bias. The successful operation of unassisted solar water splitting using the OHP module without external bias can provide insights into the design of scalable OHP-based PEC systems for future practical application and commercialization.

14 SOLAR ENERGY↗
DOE OSTI2023

Best practices for experiments and reporting in photocatalytic CO 2 reduction

Visible-light-driven conversion of CO 2 to fuels and valuable compounds has experienced tremendous activity in recent years, aiming at storing solar energy into chemical bonds using CO 2 as a renewable feedstock, ultimately at massive scale. Despite these efforts, processes and catalytic systems are still at an early stage of development, with fundamental mechanistic challenges as pre-requisites for device design. In this context, collective efforts currently necessitate the exploration of a variety of approaches. On the other hand, an alignment of practices is required to ensure robustness, precision and accuracy of the results, as well as shared metrics and tools for advancing our understanding of the necessary processes. Here, this Perspective aims to provide guidelines and a framework towards these objectives.

photocatalysis↗
DOE OSTI2023

Codesign of an integrated metal–insulator–semiconductor photocathode for photoelectrochemical reduction of CO 2 to ethylene

Photoelectrochemical carbon-dioxide reduction (PEC CO 2 R) is a potentially attractive means for producing chemicals and fuels using sunlight, water, and carbon dioxide; however, this technology is in its infancy. To date, most studies of PEC CO 2 R have reported products containing one carbon atom (C 1 products) but the production of valuable products containing two or more carbons (C 2+ products), such as ethylene, ethanol, etc., is rarely demonstrated. Metal–semiconductor–insulator (MIS) photocathode/catalyst structures offer a promising approach for this purpose, since they integrate the functions of light absorption, charge separation, and catalysis. In this study, we have investigated a Cu/TiO 2 /p-Si photocathode/catalyst structure with the aim of establishing the effects of semiconductor–insulator interactions on the performance of the photocathode and the influence of the direction of illumination of the MIS structure on the total current density and the distribution of products formed by on the Cu catalyst. Here, we have also examined the influence of ionomer coatings deposited on the Cu surface on the total current density and the distribution of products formed. A major finding is that for a fixed Cu potential the distribution of products formed by PEC CO 2 R are the same, irrespective of the direction of illumination, and are identical to those obtained by electrochemical reduction of CO 2 (EC CO 2 R). Another important finding is that the total current density and the faradaic efficiency to ethylene are enhanced significantly by deposition of a thin bilayer of Sustainion/Nafion onto the surface of the Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Oxynitrides enabled photoelectrochemical water splitting with over 3,000 hrs stable operation in practical two-electrode configuration

Solar photoelectrochemical reactions have been considered one of the most promising paths for sustainable energy production. To date, however, there has been no demonstration of semiconductor photoelectrodes with long-term stable operation in a two-electrode configuration, which is required for any practical application. Herein, we demonstrate the stable operation of a photocathode comprising Si and GaN, the two most produced semiconductors in the world, for 3,000 hrs without any performance degradation in two-electrode configurations. Measurements in both three- and two-electrode configurations suggest that surfaces of the GaN nanowires on Si photocathode transform in situ into Ga-O-N that drastically enhances hydrogen evolution and remains stable for 3,000 hrs. First principles calculations further revealed that the in-situ Ga-O-N species exhibit atomic-scale surface metallization. This study overcomes the conventional dilemma between efficiency and stability imposed by extrinsic cocatalysts, offering a path for practical application of photoelectrochemical devices and systems for clean energy.

14 SOLAR ENERGY↗
DOE OSTI2022

Best Practices in PEC Water Splitting: How to Reliably Measure Solar-to-Hydrogen Efficiency of Photoelectrodes

Photoelectrochemical (PEC) water splitting, which utilizes sunlight and water to produce hydrogen fuel, is potentially one of the most sustainable routes to clean energy. One challenge to success is that, to date, similar materials and devices measured in different labs or by different operators lead to quantitatively different results, due to the lack of accepted standard operating procedures and established protocols for PEC efficiency testing. With the aim of disseminating good practices within the PEC community, we provide a vetted protocol that describes how to prepare integrated components and accurately measure their solar-to-hydrogen (STH) efficiency (η STH ). This protocol provides details on electrode fabrication, η STH test device assembly, light source calibration, hydrogen evolution measurement, and initial material qualification by photocurrent measurements under monochromatic and broadband illumination. Common pitfalls in translating experimental results from any lab to an accurate STH efficiency under an AM1.5G reference spectrum are discussed. A III–V tandem photocathode is used to exemplify the process, though with small modifications, the protocol can be applied to photoanodes as well. Dissemination of PEC best practices will help those approaching the field and provide guidance for comparing the results obtained at different lab sites by different groups.

08 HYDROGEN↗
DOE OSTI2022

Shape-Controlled NaTaO 3 by Flux-Mediated Synthesis

NaTaO 3 is a stable and wide bandgap n-type semiconductor material with many different applications. Here, a flux-mediated synthesis method is presented for NaTaO 3 resulting in highly distinctive, substrate covering shapes via precursor chemistry variation at comparatively low temperatures. It is found that the microstructure of the resulting NaTaO 3 films can be varied from nanocubes to smooth thin films. These shapes and surface chemistries can be correlated by employing density functional theory calculations and surface sensitive X-ray photoemission spectroscopy. This study provides guidance on how to synthesize the material and tailor its shape and surface termination for different applications. Finally, as a proof of concept of one possible application, NaTaO 3 is applied to perovskite solar cells as the electron transport layer, resulting in conversion efficiencies of >19%. Further, this study provides a new strategy for designing ternary oxide thin films for renewable energy applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Nanoscale Confinement of Photo-Injected Electrons at Hybrid Interfaces

A prerequisite for advancing hybrid solar light harvesting systems is a comprehensive understanding of the spatiotemporal dynamics of photoinduced interfacial charge separation. Here, we demonstrate access to this transient charge redistribution for a model hybrid system of nanoporous zinc oxide (ZnO) and ruthenium bipyridyl chromophores. The site-selective probing of the molecular electron donor and semiconductor acceptor by time-resolved X-ray photoemission provides direct insight into the depth distribution of the photoinjected electrons and their interaction with the local band structure on a nanometer length scale. Our results show that these electrons remain localized within less than 6 nm from the interface, due to enhanced downward band bending by the photoinjected charge carriers. This spatial confinement suggests that light-induced charge generation and transport in nanoscale ZnO photocatalytic devices proceeds predominantly within the defect-rich surface region, which may lead to enhanced surface recombination and explain their lower performance compared to titanium dioxide (TiO 2 )-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chalkboard 2 - How to Make Clean Hydrogen

Clean hydrogen is a carbon-free energy carrier that can be produced from water and sustainable energy sources such as wind, solar, and nuclear. Therefore, clean hydrogen is one of the best ways to not only decarbonize the energy supply system, but also address the zero-emission challenges specific to large-carbon emitting industries that are difficult to separate from fossil fuels. To help achieve the Biden Administration's goal of a 100% clean energy economy and net-zero emissions by 2050, several tens of millions of metric tons of clean, low-cost hydrogen will be needed annually. The HydroGEN Advanced Water Splitting Materials (AWSM) Consortium was established in 2016 as part of the Energy Materials Network (EMN) under the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office to enhance the performance, improve the durability, and reduce the cost of clean hydrogen production technologies, and it is helping to advance the H2@Scale vision.

08 HYDROGEN↗
DOE OSTI2021

Facet‐Selective Deposition of Ultrathin Al 2 O 3 on Copper Nanocrystals for Highly Stable CO 2 Electroreduction to Ethylene

Abstract Catalysts based on Cu nanocrystals (NCs) for electrochemical CO 2 ‐to‐C 2+ conversion with high activity have been a subject of considerable interest, but poor stability and low selectivity for a single C 2+ product remain obstacles for realizing sustainable carbon‐neutral cycles. Here, we used the facet‐selective atomic layer deposition (FS‐ALD) technique to selectively cover the (111) surface of Cu NCs with ultrathin Al 2 O 3 to increase the exposed facet ratio of (100)/(111), resulting in a faradaic efficiency ratio of C 2 H 4 /CH 4 for overcoated Cu NCs 22 times higher than that for pure Cu NCs. Peak performance of the overcoated catalyst (Cu NCs/Al 2 O 3 ‐10C) reaches a C 2 H 4 faradaic efficiency of 60.4 % at a current density of 300 mA cm −2 in 5 M KOH electrolyte, when using a gas diffusion electrode flow cell. Moreover, the Al 2 O 3 overcoating effectively suppresses the dynamic mobility and the aggregation of Cu NCs, which explains the negligible activity loss and selectivity degradations of Cu NCs/Al 2 O 3 ‐10C shown in stability tests.

Li, Hui↗
DOE OSTI2021

Facet-Selective Deposition of Ultrathin Al 2 O 3 on Copper Nanocrystals for Highly Stable CO 2 Electroreduction to Ethylene.

Catalysts based on Cu nanocrystals (NCs) for electrochemical CO 2 -to- 2+ conversion with high activity have been a subject of considerable interest, but poor stability and low selectivity for a single C 2+ product remain obstacles for realizing sustainable carbon-neutral cycles. In this study, we used the facet-selective atomic layer deposition (FS-ALD) technique to selectively cover the (111) surface of Cu NCs with ultrathin Al 2 O 3 to increase the exposed facet ratio of (100)/(111), resulting in a faradaic efficiency ratio of C 2 H 4 /CH 4 for overcoated Cu NCs 22 times higher than that for pure Cu NCs. Peak performance of the overcoated catalyst (Cu NCs/Al 2 O 3 -10C) reaches a C 2 H 4 faradaic efficiency of 60.4 % at a current density of 300 mA cm -2 in 5 M KOH electrolyte, when using a gas diffusion electrode flow cell. Moreover, the Al 2 O 3 overcoating effectively suppresses the dynamic mobility and the aggregation of Cu NCs, which explains the negligible activity loss and selectivity degradations of Cu NCs/Al 2 O 3 -10C shown in stability tests.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 reduction on pure Cu produces only H 2 after subsurface O is depleted: Theory and experiment

Significance Electrochemical reduction of CO 2 to fuels and valuable chemicals is a global imperative to address energy and climate challenges. Despite enormous efforts, there is not yet a commercial process. The best catalyst remains Cu metal, but a great deal of controversy revolves around the role of the presence of oxygen in the material. We combine theory and experiments to show that pure Cu without subsurface oxygen leads to no organic products. Thus, maintaining substantial oxygen at Cu surfaces is essential for long-term reduction of CO 2 to organics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Methods for tuning plasmonic and photonic optical resonances in high surface area porous electrodes

Abstract Surface plasmons have found a wide range of applications in plasmonic and nanophotonic devices. The combination of plasmonics with three-dimensional photonic crystals has enormous potential for the efficient localization of light in high surface area photoelectrodes. However, the metals traditionally used for plasmonics are difficult to form into three-dimensional periodic structures and have limited optical penetration depth at operational frequencies, which limits their use in nanofabricated photonic crystal devices. The recent decade has seen an expansion of the plasmonic material portfolio into conducting ceramics, driven by their potential for improved stability, and their conformal growth via atomic layer deposition has been established. In this work, we have created three-dimensional photonic crystals with an ultrathin plasmonic titanium nitride coating that preserves photonic activity. Plasmonic titanium nitride enhances optical fields within the photonic electrode while maintaining sufficient light penetration. Additionally, we show that post-growth annealing can tune the plasmonic resonance of titanium nitride to overlap with the photonic resonance, potentially enabling coupled-phenomena applications for these three-dimensional nanophotonic systems. Through characterization of the tuning knobs of bead size, deposition temperature and cycle count, and annealing conditions, we can create an electrically- and plasmonically-active photonic crystal as-desired for a particular application of choice.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water Splitting: Emergent Degradation Phenomena Demonstrated on Resilient, Flexible, and Scalable Integrated Photoelectrochemical Cells (Adv. Energy Mater. 48/2020)

We report Photoelectrochemical (PEC) water splitting provides a pathway to generate sustainable clean fuels using the two most abundant resources on Earth: sunlight and water. Currently, most of the successful models of PEC cells are still fabricated on small scales near 1 cm 2 , which largely limits the mass deployment of solar-fuel production. Here, the scale-up to 8 cm 2 of an integrated PEC (IPEC) device is demonstrated and its performance compared to a 1 cm 2 IPEC cell, using state-of-the-art iridium and platinum catalysts with III-V photoabsorbers. The initial photocurrents at 1 sun were 8 and 7 mA cm -2 with degradation rates of 0.60 and 0.47 mA cm -2 day -1 , during unbiased operation for the 1 and 8 cm 2 devices, respectively. Evaluating under outdoor and indoor conditions at two US National Laboratories revealed similar results, evidencing the reproducibility of this design’s performance. Furthermore, the emerging degradation mechanisms during scale-up are investigated and the knowledge gained from this work will provide feedback to the broader community, since PEC device durability is a limiting factor in its potential future deployment.

25 ENERGY STORAGE↗
DOE OSTI2020

Emergent Degradation Phenomena Demonstrated on Resilient, Flexible, and Scalable Integrated Photoelectrochemical Cells

Photoelectrochemical (PEC) water splitting provides a pathway to generate sustainable clean fuels using the two most abundant resources on Earth: sunlight and water. Currently, most of the successful models of PEC cells are still fabricated on small scales near 1 cm 2 , which largely limits the mass deployment of solar-fuel production. Here, the scale-up to 8 cm 2 of an integrated PEC (IPEC) device is demonstrated and its performance compared to a 1 cm 2 IPEC cell, using state-of-the-art iridium and platinum catalysts with III–V photoabsorbers. The initial photocurrents at 1 sun are 8 and 7 mA cm -2 with degradation rates of 0.60 and 0.47 mA cm -2 day -1 , during unbiased operation for the 1 and 8 cm 2 devices, respectively. Additionally, evaluating under outdoor and indoor conditions at two U.S. National Laboratories reveals similar results, evidencing the reproducibility of this design's performance. Furthermore, the emerging degradation mechanisms during scale-up are investigated and the knowledge gained from this work will provide feedback to the broader community, since PEC device durability is a limiting factor in its potential future deployment.

25 ENERGY STORAGE↗
DOE OSTI2020

Revealing Nanoscale Chemical Heterogeneities in Polycrystalline Mo-BiVO 4 Thin Films

The activity of polycrystalline thin film photoelectrodes is impacted by local variations of the material properties due to the exposure of different crystal facets and the presence of grain/domain boundaries. Here a multi-modal approach is applied to correlate nanoscale heterogeneities in chemical composition and electronic structure with nanoscale morphology in polycrystalline Mo-BiVO 4 . By using scanning transmission X-ray microscopy, the characteristic structure of polycrystalline film is used to disentangle the different X-ray absorption spectra corresponding to grain centers and grain boundaries. Comparing both spectra reveals phase segregation of V 2 O 5 at grain boundaries of Mo-BiVO 4 thin films, which is further supported by X-ray photoelectron spectroscopy and many-body density functional theory calculations. Theoretical calculations also enable to predict the X-ray absorption spectral fingerprint of polarons in Mo-BiVO 4 . After photo-electrochemical operation, the degraded Mo-BiVO 4 films show similar grain center and grain boundary spectra indicating V 2 O 5 dissolution in the course of the reaction. Overall, these findings provide valuable insights into the degradation mechanism and the impact of material heterogeneities on the material performance and stability of polycrystalline photoelectrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Correlating Oxidation State and Surface Area to Activity from Operando Studies of Copper CO Electroreduction Catalysts in a Gas-Fed Device

Copyright © 2020 American Chemical Society. The rational design of high-performance electrocatalysts requires a detailed understanding of dynamic changes in catalyst properties, including oxidation states, surface area, and morphology under realistic working conditions. Oxide-derived Cu catalysts exhibit a remarkable selectivity toward multicarbon products for the electrochemical CO reduction reaction (CORR), but the exact role of the oxide remains elusive for explaining the performance enhancements. Here, we used operando X-ray absorption spectroscopy (XAS) coupled with simultaneous measurements of the catalyst activity and selectivity by gas chromatography (GC) to study the relationship between oxidation states of Cu-based catalysts and the activity for ethylene (C2H4) production in a CO gas-fed cell. By utilizing a custom-built XAS cell, oxidation states of Cu catalysts can be probed in device-relevant settings and under high current densities (>80 mA cm-2) for the CORR. By employing an electrochemical oxidation process, we found that the Cu oxidation states and specific ion species do not correlate with C2H4 production. The difference in the CORR activity is also investigated in relation to electrochemical surface area (ECSA) changes. While the hydrogen evolution reaction (HER) activity is positively correlated to the ECSA changes, the increased C2H4 activity is not proportional to the ECSA. Ex situ characterization from microscopic techniques suggests that the changes in the C2H4 activity and selectivity may arise from a morphological transformation that evolves into a more active structure. These comprehensive results give rise to the development of a cell regeneration method that can restore the performance of the Cu catalyst without cell disassembly. Our study establishes a basis for the rational design of highly active electrocatalysts for broad-range reactions in a gas-fed device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗