Engineering topics

Tok, Jeffrey B.-H.

Publications and source records attributed to Tok, Jeffrey B.-H..

9 records

DOE OSTI2023

Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering

Conjugated polymers based on indacenodithiophene-benzothiadiazole (IDT-BT) have attracted great interest due to their high charge carrier mobilities while being low crystallinity (i.e. near-amorphous.) They represent a promising design strategy to achieve both excellent stretchability and electrical performance. Here, we describe an approach on structural modifications of IDT-BT, namely by introducing non-covalent interactions and substituting building blocks to promote extended coplanar backbones. We systematically investigated the effects of structural modifications on backbone conformation, polymer aggregations, and charge carrier mobilities. Among the investigated polymers, the fluorinated derivative IDT-FBT demonstrated the highest charge carrier mobility of 5.19 cm 2 /Vs, along with low activation energy and Urbach energy indicating its low energy disorder level. The high mobility was attributed to the higher backbone planarity reinforced by S···F and H···F non-covalent interactions and improved interchain interactions through strong aggregation. In conclusion, our findings indicate that increasing backbone coplanarity may further improve mobility in low crystallinity conjugated polymers.

36 MATERIALS SCIENCE↗

DOE OSTI2023

An emerging class of carbon materials: Synthesis and applications of carbon flowers

Porous carbon materials are widely applied in energy storage, gas adsorption, and catalysis applications because of their advantageous properties, such as high surface areas, tunable surface properties, chemical stability, high conductivity, and low cost. Recently, a flower-shaped carbon material, referred to as carbon flowers (CFs), has received attention as an emerging porous carbon material because of its unique shape. In this review, we summarize the synthetic strategies, characterization techniques, and formation mechanisms of CFs from various precursors. We also review the applications of CFs and their pros and cons. Last, we discuss challenges and perspectives for future development of CFs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Formation Mechanism of Flower-like Polyacrylonitrile Particles

Flower-like polyacrylonitrile (PAN) particles have shown promising performance for numerous applications, including sensors, catalysis, and energy storage. However, the detailed formation process of these unique structures during polymerization has not been investigated. Here, we elucidate the formation process of flower-like PAN particles through a series of in situ and ex situ experiments. We have the following key findings. First, lamellar petals within the flower-like particles were predominantly orthorhombic PAN crystals. Second, branching of the lamellae during the particle formation arose from PAN's fast nucleation and growth on pre-existing PAN crystals, which was driven by the poor solubility of PAN in the reaction solvent. Third, the particles were formed to maintain a constant center-to-center distance during the reaction. The separation distance was attributed to strong electrostatic repulsion, which resulted in the final particles' spherical shape and uniform size. Lastly, we employed the understanding of the formation mechanism to tune the PAN particles' morphology using several experimental parameters including incorporating comonomers, changing temperature, adding nucleation seeds, and adjusting the monomer concentration. Here these findings provide important insights into the bottom-up design of advanced nanostructured PAN-based materials and controlled polymer nanostructure self-assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Topological supramolecular network enabled high-conductivity, stretchable organic bioelectronics

Intrinsically stretchable bioelectronic devices based on soft and conducting organic materials have been regarded as the ideal interface for seamless and biocompatible integration with the human body. A remaining challenge is to combine high mechanical robustness with good electrical conduction, especially when patterned at small feature sizes. We develop a molecular engineering strategy based on a topological supramolecular network, which allows for the decoupling of competing effects from multiple molecular building blocks to meet complex requirements. We obtained simultaneously high conductivity and crack-onset strain in a physiological environment, with direct photopatternability down to the cellular scale. We further collected stable electromyography signals on soft and malleable octopus and performed localized neuromodulation down to single-nucleus precision for controlling organ-specific activities through the delicate brainstem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Reprocessable and Recyclable Polymer Network Electrolytes via Incorporation of Dynamic Covalent Bonds

Mechanically durable polymer network electrolytes are desirable for batteries; however, covalent cross-linking adversely affects their large-scale manufacturing, and they are difficult to recycle post-lifespan. In this work, we address the electrolyte reprocessability and recyclability challenges through the use of dynamic covalent bonds for polymer network solid electrolytes. Specifically, the associative dynamic vinylogous urethane motif is incorporated into a poly(ethylene oxide) network electrolyte containing lithium bis(fluorosulfonyl)imide (LiFSI) salt. The resulting dynamic covalent network electrolyte possesses a modest ion conductivity (~10–5 S/cm at room temperature) and good reprocessability. Stress–relaxation studies indicate that the LiFSI salt can catalyze the bond exchange and enhance the network dynamics. Furthermore, the reprocessability associated with bond exchange can be tuned by simply adjusting the formulation of reagent compositions, in which increasing the amount of excess amine or using a shorter chain of PEO prepolymer can further enhance the network dynamics and corresponding reprocessability.

25 ENERGY STORAGE↗

DOE OSTI2021

A molecular design approach towards elastic and multifunctional polymer electronics

Next-generation wearable electronics require enhanced mechanical robustness and device complexity. Besides previously reported softness and stretchability, desired merits for practical use include elasticity, solvent resistance, facile patternability and high charge carrier mobility. Here, we show a molecular design concept that simultaneously achieves all these targeted properties in both polymeric semiconductors and dielectrics, without compromising electrical performance. This is enabled by covalently-embedded in-situ rubber matrix (iRUM) formation through good mixing of iRUM precursors with polymer electronic materials, and finely-controlled composite film morphology built on azide crosslinking chemistry which leverages different reactivities with C–H and C=C bonds. The high covalent crosslinking density results in both superior elasticity and solvent resistance. When applied in stretchable transistors, the iRUM-semiconductor film retained its mobility after stretching to 100% strain, and exhibited record-high mobility retention of 1 cm 2 V -1 s -1 after 1000 stretching-releasing cycles at 50% strain. The cycling life was stably extended to 5000 cycles, five times longer than all reported semiconductors. Furthermore, we fabricated elastic transistors via consecutively photo-patterning of the dielectric and semiconducting layers, demonstrating the potential of solution-processed multilayer device manufacturing. The iRUM represents a molecule-level design approach towards robust skin-inspired electronics.

42 ENGINEERING↗

DOE OSTI2021

Strain-insensitive intrinsically stretchable transistors and circuits

An all-elastomer strain engineering approach, which uses patterned elastomer layers with tunable stiffnesses, can be used to create intrinsically stretchable transistor arrays with a device density of 340 transistors cm -2 and strain insensitivity of less than 5% performance variation when stretched to 100% strain. Intrinsically stretchable electronics can form intimate interfaces with the human body, creating devices that could be used to monitor physiological signals without constraining movement. However, mechanical strain invariably leads to the degradation of the electronic properties of the devices. Here we show that strain-insensitive intrinsically stretchable transistor arrays can be created using an all-elastomer strain engineering approach, in which the patterned elastomer layers with tunable stiffnesses are incorporated into the transistor structure. By varying the cross-linking density of the elastomers, areas of increased local stiffness are introduced, reducing strain on the active regions of the devices. This approach can be readily incorporated into existing fabrication processes, and we use it to create arrays with a device density of 340 transistors cm -2 and a strain insensitivity of less than 5% performance variation when stretched to 100% strain. We also show that it can be used to fabricate strain-insensitive circuit elements, including NOR gates, ring oscillators and high-gain amplifiers for the stable monitoring of electrophysiological signals.

42 ENGINEERING↗

DOE OSTI2020

Fully stretchable active-matrix organic light-emitting electrochemical cell array

Intrinsically and fully stretchable active-matrix-driven displays are an important element to skin electronics that can be applied to many emerging fields, such as wearable electronics, consumer electronics and biomedical devices. Here, we show for the first time a fully stretchable active-matrix-driven organic light-emitting electrochemical cell array. Briefly, it is comprised of a stretchable light-emitting electrochemical cell array driven by a solution-processed, vertically integrated stretchable organic thin-film transistor active-matrix, which is enabled by the development of chemically-orthogonal and intrinsically stretchable dielectric materials. Our resulting active-matrix-driven organic light-emitting electrochemical cell array can be readily bent, twisted and stretched without affecting its device performance. When mounted on skin, the array can tolerate to repeated cycles at 30% strain. This work demonstrates the feasibility of skin-applicable displays and lays the foundation for further materials development.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Tuning the Mechanical Properties of a Polymer Semiconductor by Modulating Hydrogen Bonding Interactions

Conjugation breakers (CBs) with different H-bonding chemistry and linker flexibility are designed and incorporated into a Diketopyrrolopyrrole (DPP)-based conjugated polymer backbone. The effects of H-bonding interactions on polymer semiconductor morphology, mechanical properties and electrical performance are systematically investigated. We observe that CBs with H-bonding self-association constant >0.7 or denser packing tendency are able to induce higher polymer chain aggregation and crystallinity in as-casted thin film, resulting in higher modulus and crack on-set strain. Additionally, the rDoC (relative degree of crystallinity) of the stretched thin film with the highest crack on-set strain only suffers a small decrease, suggesting the main energy dissipation mechanism is the breakage of H-bonding interactions. By contrast, other less stretchable polymer films dissipate strain energy through the breakage of crystalline domains, indicated by drastic decrease in rDoC. Furthermore, we evaluate their electrical performance under mechanical strain in fully stretchable field-effect transistors. The polymer with the highest crack on-set strain has the least degradation in mobility as a function of strain. Overall, these observations suggest that we can aptly tune the mechanical properties in polymer semiconductors by modulating intermolecular interactions, such as H-bonding chemistry and linker flexibility. Such understanding provides molecular design guidelines for future stretchable semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗