Engineering topics
Thompson, Michael
Publications and source records attributed to Thompson, Michael.
Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings
In a previous collaboration with Emrgy (CRADA agreement NFE-17-06532), a housing component of Emrgy’s 10 kW gearbox was casted out of aluminum alloys using impression molds prepared using 3D printed techniques. (Henderson, 2018). After comparison with Emrgy’s existing hardware and material testing, the 3D printed impression molds were verified to represent a valid approach to advance technology readiness and commercialize Emrgy’s technology.
Cybersecurity Framework Profile for Electric Vehicle Extreme Fast Charging Infrastructure
This document is the Cybersecurity Framework Profile (Profile) developed for the Electric Vehicle Extreme Fast Charging (EV/XFC) ecosystem, including the four domains that relies on the ecosystem (i) Electric Vehicles (EV); (ii) Extreme Fast Charging (XFC); (iii) XFC Cloud or Third-Party Operations; and (iv) Utility and Building Networks. This Profile utilizes the NIST Cybersecurity Framework Version 1.1 and provides voluntary guidance to help relevant parties develop Profiles specific to their organization to understand, assess, and communicate their cybersecurity posture as a part of their risk management process. The Profile is intended to supplement, not replace, an existing risk management program or cybersecurity standards, regulations, and industry guidelines that are in current use by the EV/XFC industry.
Smooth, homogeneous, high-purity Nb 3 Sn superconducting RF resonant cavity by seed-free electrochemical synthesis
Abstract Workbench-size particle accelerators, enabled by Nb 3 Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and x-rays. Thin-film Nb 3 Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb 3 Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb 3 Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb 3 Sn by five times compared to typical vapor-diffused Nb 3 Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb 3 Sn. We have successfully applied this Nb 3 Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb 3 Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.
Erosion-Corrosion Detection in Carbon Steel Pipe Loops using SRNLs Thickness and Mass Loss Measurement Coupons - 20464
Structural health of waste transfer infrastructure is of utmost importance to DOE and communities surrounding their active sites. A Fitness-for-Service (FFS) program for the Waste Transfer System has been implemented by the US Department of Energy (DOE) for the purposes of evaluating and quantifying the degradation of critical components. Currently, the method of approach is to section and evaluate pipelines that have been removed at end service. In order to augment data collection methods applied to making lifespan estimates of waste transfer system components, Florida International University (FIU) has been investigating new-technology based strategies for quantifying the rate of degradation. Present research considers the option of a coupon system installed on a section of pipe at points of interest that will provide easy access to high resolution measurements of erosion/corrosion rates during operation. Researchers at Savannah River National Laboratory (SRNL) have developed this novel solution for in situ erosion and corrosion measurements in many applicable locations such as tanks, pipes, ducts, and injection points. The coupons are approximately 12.7 mm (1/2 inch) in diameter and 25.4 mm (1 inch) in length and can be placed in the pipe sections using Swagelok compression fittings. The coupon design allows for monitoring of the total degradation resulting from corrosion and erosion. High-resolution Ultrasonic Thickness (UT) testing allows in-situ monitoring of both degradation mechanisms. When removed from the system mass loss resulting from corrosion and erosion may also be evaluated. Experimental testing at FIU implemented the SRNL coupon system in a 6.10 meter (20 foot) pipe loop system comprised of 50.8 mm (2 inch) and 76.2 mm (3 inch) pipe sections in order to replicate expected use cases at the sites. Operational conditions were emulated by pumping abrasive materials through the pipeline at full capacity and collecting measurements from the SRNL coupons. Initial testing was conducted by circulating water followed by a mixture of sand and water for uniform wear rates. Thickness changes and mass loss were measured, and the surface exposed to the process fluid was observed for visual evidence of characteristic wear patterns resulting from an erosive environment. The test matrix consisted of several hours of operation and using fine, medium and coarse grain sands. Test results were analyzed to check for all three parameters (mass loss/gain, thickness change and surface patters) which could provide estimates of the remaining useful life of the pipe sections. Thus, the research presents the findings of this evaluation of the SRNL coupons as a means for conducting high accuracy, cost effective in-situ analysis of pipeline and waste transfer systems for erosion and corrosion susceptibility. (authors)
The Efficacy of Replacing Metallic Cerium in Aluminum–Cerium Alloys with LREE Mischmetal
The ongoing development of aluminum–cerium alloys has produced materials exhibiting elevated temperature mechanical property retention, long term microstructural stability, and flexible processability compared to traditional aluminum alloys, accommodating the growing demand for high temperature aluminum alloys not requiring the use of high-cost elements like scandium. To date, reported Al–Ce alloy compositions contain large amounts of elemental cerium. Mischmetal (MM), a mixture of lanthanum, cerium, and other light rare earth elements (LREE) is less expensive and more available than pure cerium. The chemical similarity of the LREEs means there is possibility to use MM as the primary alloy addition, lowering alloy cost. This talk will report the effect of using MM instead of cerium in a 12 wt% binary alloy on mechanical properties, phase constituency, thermal stability, and load sharing. Results will show that MM can be substituted completely for cerium with a mostly positive impact on alloy performance.
Stream splitting moving target defense
Systems and methods for utilizing stream splitting Moving Target Defense (MTD) to provide enhanced computer system communication system security by splitting a data stream in to a plurality of paths is described. In some implementations, Stream splitting MTD, involves splitting a single data stream (e.g., TCP stream) into a plurality of discrete units, then sending and receiving those discrete units from and to different (ideally geographically disparate) receiving servers, with the stream being reassembled on the receiving end. The plurality of discrete units of data include resequencing data. The size of each discrete unit may vary depending on the specific implementation, even down to small unit sizes (e.g., a single packet).
Genome and methylome of the oleaginous diatom Cyclotella cryptica reveal genetic flexibility toward a high lipid phenotype
Not Available
Security of Electronic Voting in the United States
In the midst of numerous high-profile cyber-attacks, the US is considering whether to categorize the US electronic voting system as “critical infrastructure”, to be protected and invested in much the same way as the US power grid or waterways.
Multiple operating system rotation environment moving target defense
Systems and methods for providing a multiple operating system rotation environment ("MORE") moving target defense ("MTD") computing system are described. The MORE-MTD system provides enhanced computer system security through a rotation of multiple operating systems. The MORE-MTD system increases attacker uncertainty, increases the cost of attacking the system, reduces the likelihood of an attacker locating a vulnerability, and reduces the exposure time of any located vulnerability. The MORE-MTD environment is effectuated by rotation of the operating systems at a given interval. The rotating operating systems create a consistently changing attack surface for remote attackers.
Effectiveness of an in-situ permeable reactive barrier in removing strontium-90 from groundwater - 15418
An in-situ permeable reactive barrier (PRB) is being used to remove strontium-90 from groundwater along the 100-N Area shoreline at the U.S. Department of Energy Hanford Site in southeastern Washington. The PRB was formed by emplacing apatite, a calcium phosphate mineral, in the subsurface sediments via injection of calcium-citrate and sodium-phosphate solution into the aquifer through a network of vertical wells. The relatively slow biodegradation of citrate allowed sufficient time for the injected solution to disperse in the PRB treatment zone as the free calcium and phosphate combined to form apatite. Substitution of strontium for calcium in the apatite crystal structure is thermodynamically favorable. As groundwater flows through the PRB toward the Columbia River, strontium-90 is sequestered into the apatite crystal matrix. The sequestered strontium-90 undergoes radioactive decay in place within the PRB. Groundwater monitoring wells installed between the PRB and the Columbia River are used to monitor the PRB effectiveness. The concentration of strontium-90 in the monitoring wells following apatite emplacement are compared to the pre-injection concentrations. The performance goal of the PRB is to reduce the concentration of strontium-90 in groundwater down gradient of the PRB by 90 percent, compared to the pre-injection concentrations. Groundwater samples in Fall 2013 show the percent reduction in strontium-90 concentrations ranged from 71 to 98 percent in eleven of the twelve monitoring wells. The data indicate that the PRB is effective in reducing the flux of strontium-90 toward the Columbia River and is thereby instrumental in protection of the Columbia River. (authors)
Effectiveness of OS Diversity in a Moving Target Defense Platform
Explore the source record for details and available documents.
Global and Local Helioseismic Studies of Solar Convection Zone Dynamics Using SOI-MDI on SOHO
Our joint collaborative analyses of global mode data to characterize the solar differential rotation (e.g. Thompson et al. 1996, Schou et al. 1998), and most recently to detect and analyze temporal variations in angular velocity Omega profiles both within the convection zone and in the deeper radiative interior (e.g. Howe et al 2000a,b; Toomre et al. 2000), have led to a series of fascinating discoveries. These should be pursued further as the solar cycle continues. The physical deductions being made from these studies have been greatly strengthened by utilizing both SOI-MDI and GONG data in order to have two independent observational realizations of Doppler images spanning a five-year interval, using two separate procedures to determine global mode splittings, and then analyzing those splitting data sets using both RLS and SOLA inversion procedures. There are considerable subtleties in the effects of instrumental response functions and calibrations, sensitivity of peak finding algorithms and their mode leakage estimates, and stochastic variations in mode amplitudes that can all contribute to apparent changes in the Omega profiles being inferred from sequences of helioseismic data. We have come to understand the implications of many of these calibration and analysis steps, greatly aided by frequent multi-week collaborative working sessions in our Helioseismic Analysis Facility (HAF) at JILA involving many members of the SO1 dynamics and inversion team, including most of our Co-Is during the summer months when we hold intensive working sessions. Considerable further focused attention is required in a collaborative setting on such global mode issues as we continue studying the changing sun.