Engineering topics
Thompson, Mark E.
Publications and source records attributed to Thompson, Mark E..
Combining Fluorescence and Phosphorescence to Achieve Very Long Lifetime and Efficient White OLEDs (Final Technical Report)
The objective of our project was to develop a high efficiency, long lived WOLED using a hybrid approach to harvesting singlet and triplet excitons, as described above. WE met out GONOGO metric at the end of year one, achieving an efficiency of nearly 50 lm/W for high quality white light emission. We faced an unforeseen problem in achieving this high efficiency level at high brightness. Our hybrid devices showed a significant roll off in device efficiency as the current is raised, such that our efficiency dropped to ca. 10 lm/W at 1000 nits. This roll off precluded us form achieving our send year targets with regards to efficiency at high brightness and long device lifetime. We spent the majority of our efforts in year two trying to decrease or eliminate this efficiency roll off, but this roll off prevented us from reaching our end of program target of high efficiency at high brightness with long device lifetime. Toward the end of the sixth quarter of the program we began to investigate a new approach, which involved a tandem WOLED, with a hybrid blue/red OLED stacked on a phosphorescent green OLED. The resultant emission from the stack will be white and the tandem structure relaxes the constraints on the materials, which we believe is key issue in the high roll off in efficiency.
Excited state management
Arrangements and techniques for providing organic emissive layers are provided, in which the emissive layer includes a first dopant having a dissociative energy level. A second dopant in the emissive layer provides a solid state sink energy level, to which doubly excited excitons and/or polarons may transition instead of to the dissociative energy level, thereby decreasing the undesirable effects of transitions to the dissociative energy level.
Improving Photocatalysis for the Reduction of CO 2 through Non-covalent Supramolecular Assembly
Here, we report the first successful enhancement of photocatalytic performance by introduction of hydrogen bonding interactions to Re bipyridine catalyst and Ru photosensitizer system (ReDAC/RuDAC) with the addition of amide substituents. This system shows a more than threefold increase in turnover number (TONCO = 100 ± 4) and quantum yield (Φ CO = 23 ± 1 %) for carbon monoxide formation compared to the control system using unsubstituted Ru photosensitizer (RuBPY) and ReDAC (TON CO = 28 ± 4 and Φ CO = 7 ± 1 %) in acetonitrile (MeCN) with BIH as sacrificial reductant. In dimethylformamide (DMF), a hydrogen bonding interrupting solvent, the ReDAC/RuDAC system showed a decrease in catalysis while the control system exhibited an increase, indicating the role of hydrogen bonding in enhancing the photocatalysis for CO 2 reduction through supramolecular assembly. RuDAC and RuBPY have demonstrated no significant differences in lifetime measurements, spectroscopic analysis, electrochemical studies and spectroelectrochemical studies, revealing that the enhancement in photocatalysis in RuDAC/ReDAC in MeCN system is not due to differences in properties unrelated to catalyst/photosensitizer association but a direct result of hydrogen bonding interactions.
Energy sensitization of acceptors and donors in organic photovoltaics
Disclosed herein are organic photosensitive optoelectronic devices comprising acceptor and/or donor sensitizers to increase absorption and photoresponse of the photoactive layers of the devices. In particular, devices herein include at least one acceptor layer and at least one donor layer, wherein the acceptor layer may comprise a mixture of an acceptor material and at least one sensitizer, and the donor layer may comprise a mixture of a donor material and at least one sensitizer. Methods of fabricating the organic photosensitive optoelectronic devices are also disclosed.
Tuning Singlet and Triplet Excited State Energies and Frontier Orbitals of Imidazole Host/Emitter for Hybrid White OLEDs
In this work, we report hybrid fluorescent/phosphorescent WOLEDs employing blue fluorescent and green and red phosphorescent emitters doped into a host matrix. The fluorescent emitting dopant harnesses all electrically generated high energy singlet excitons for blue emission, and the phosphorescent dopants harvest the remainder of lower-energy triplet excitons for green and red emission. This design requires the singlet state (S1) of the host to be higher than the S1 of the fluorescent dopant so that the singlet excitons generated on the host are transferred to the fluorescent dopant. Furthermore, the triplet state (T1) of the host matrix should be lower than the T1 of the fluorescent dopant so the triplet excitons generated on the fluorescent dopant can be transferred to the host matrix which will then be transferred to the green and red phosphors. To develop a host material that can serve this purpose, we tune the electronic properties of phenanthro[9,10-d]imidazole by incorporating phenyl and/or pyridyl moieties at the N1 and C2 positions of phenanthro[9,10-d]imidazole. This substitution resulted in variety of host materials with different singlet/triplet energies, quantum efficiency and redox values. The resulting phenanthro[9,10-d]imidazoles are employed as host materials for fluorescent and phosphorescent dopants and as neat fluorescent emitters. Monochromatic devices with a fluorescent emitter and the phenanthro[9,10-d]imidazoles as host materials or as neat fluorescent emitter achieved near theoretical maximum efficiency. Finally, efficient three-color hybrid WOLEDs were fabricated using the phenanthro[9,10-d]imidazoles as hosts for a fluorescent dopant or as neat fluorescent emitters and host for green and red phosphors.
Tuning the Optical and Photophysical Properties of Boron Aza-Dipyridylmethene dyes for Optoelectronics Application
A series of substituted boron aza-dipyridylmethene (aD) compounds are explored for their attractive photophysical and electrochemical properties as fluorescent emitters for blue OLEDs. Previous work in our lab have demonstrated the synthetic ease of dipyridylmethene monomers and their interesting photophysical properties as homoleptic meso-linked dimers. Using Density Functional Theory (DFT) modeling, we combine our theoretical and experimental efforts to synthesize a library of aD compounds by replacing the meso carbon with nitrogen to destabilize the HOMO energy. The synthesized aD derivatives emit blue light with λ max between 400-460 nm and internal quantum efficiencies above 85 % . From TD-DFT calculations, estimation of the singlet and triplet energies that are deduced from fluorescence and phosphorescence emission, respectively, closely matches the experimental data of ΔE ST ≤ 0.4 eV. Aza-dipyridylmethene show promising potential as blue emitting fluorophores in OLEDs with EQE max = 4.5 %, approaching the maximum theoretical limit of fluorescent (fl) OLED of 5.5 %. Boron aza-dipyridylmethene are synthetically tunable compounds which show interesting photophysical properties for applications in organic electronics.
Organic photosensitive devices comprising aryl squaraines and methods of making the same
There is disclosed squaraine compounds of formula I: ##STR00001## wherein each of Y.sub.1 and Y.sub.2 is independently chosen from an optionally substituted amino group and an optionally substituted aryl group. Also described are organic optoelectronic devices comprising a Donor-Acceptor heterojunction that is formed from one or more of the squaraine compounds. A method of making the disclosed device, which may include one or more sublimation step for depositing said squaraine compound, is also disclosed.
Systematic Control of the Orientation of Organic Phosphorescent Pt Complexes in Thin Films for Increased Optical Outcoupling
Abstract Orienting light‐emitting molecules relative to the substrate is an effective method to enhance the optical outcoupling of organic light‐emitting devices. Platinum(II) phosphorescent complexes enable facile control of the molecular alignment due to their planar structures. Here, the orientation of Pt(II) complexes during the growth of emissive layers is controlled by two different methods: modifying the molecular structure and using structural templating. Molecules whose structures are modified by adjusting the diketonate ligand of the Pt complex, dibenzo‐( f , h )quinoxaline Pt dipivaloylmethane, (dbx)Pt(dpm), show an ≈20% increased fraction of horizontally aligned transition dipole moments compared to (dbx)Pt(dpm) doped into a 4,4′‐bis( N ‐carbazolyl)‐1,1′‐biphenyl, CBP, host. Alternatively, a template composed of highly ordered 3,4,9,10‐perylenetetracarboxylic dianhydride monolayers is predeposited to drive the alignment of a subsequently deposited emissive layer comprising (2,3,7,8,12,13,17,18‐octaethyl)‐21H,23H‐porphyrinplatinum(II) doped into triindolotriazine. This results in a 60% increase in horizontally aligned transition dipole moments compared to the film deposited in the absence of the template. The findings provide a systematic route for controlling molecular alignment during layer growth, and ultimately to increase the optical outcoupling in organic light‐emitting diodes.
Stable organic photosensitive devices with exciton-blocking charge carrier filters utilizing high glass transition temperature materials
Disclosed herein are stable organic photosensitive devices including at least one exciton-blocking charge carrier filter. The filters comprise a mixture of at least one wide energy gap material having a sufficiently high glass transition temperature, e.g., higher than the temperature or temperature range at which the device typically operates, higher than a highest operating temperature of the device, higher than a threshold temperature value, etc. and at least one electron or hole conducting material. As described herein, the novel filters simultaneously block excitons and conduct the desired charge carrier (electrons or holes).
Fusing porphyrins with polycyclic aromatic hydrocarbons and heterocycles for optoelectronic applications
A compound that can be used as a donor material in organic photovoltaic devices comprising a non-activated porphyrin fused with one or more non-activated polycyclic aromatic rings or one or more non-activated heterocyclic rings can be obtained by a thermal fusion process. The compounds include those having the following structureBy heating the reaction mixture of non-activated porphyrins with non-activated polycyclic aromatic rings or heterocyclic rings to a fusion temperature and holding for a predetermined time, fusion of one or more polycyclic rings or heterocyclic rings to the non-activated porphyrin core in meso,β fashion is achieved resulting in hybrid structures containing a distorted porphyrin ring with annulated aromatic rings. The porphyrin core can be olygoporphyrins.
Phenanthro[9,10- d ]triazole and imidazole derivatives: high triplet energy host materials for blue phosphorescent organic light emitting devices
A class of wide bandgap host materials is introduced as an alternative to carbazole-based hosts to enhance the efficiency and transport properties of organic light emitting diodes (OLEDs). We have synthesized and investigate the photophysical and electrochemical properties of a series of phenanthrene derivatives incorporating fused triazole or imidazole rings. Here, the resulting phenanthro[9,10-d]triazoles and phenanthro[9,10-d]imidazoles are suitable host materials for blue phosphors due to their high triplet energies and conductivities. Incorporation of bulky substituent groups leads to retention of the high triplet energies in the solid state. The most promising materials are incorporated in blue phosphorescent OLEDs that achieve external quantum efficiencies >20%.
Rapid Multiscale Computational Screening for OLED Host Materials
The design of new host materials for phosphorescent OLEDs is challenging because several physical property requirements must be met simultaneously. A triplet energy (E T ) higher than that of the chosen emitting dopant, appropriate HOMO/LUMO energy levels, good charge carrier transport, and high stability are all required. Here, computational methods were used to screen structures to find the most promising candidates for OLED hosts. The screening was carried out in three Tiers. The Tier 1 selection, based on Density Functional Theory calculations identified a set of eight molecular structures with E T > 2.9 eV, suitable for hosting blue phosphorescent dopants such as iridium(III)bis((4,6-di-fluorophenyl)-pyridinato-N,C2’)picolinate (FIrpic). Phenanthro[9,10 d]imidazole was chosen as the starting point for the Tier 2 selection. Thirty seven unique molecular structures were enumerated by isoelectronic nitrogen transmutation of up to two CH fragments of the phenanthrene. Three molecules, i.e. imidazo[4,5 f] phenanthrolines with nitrogens at the 1,10 , 3,8 and 4,7 positions, were selected for Tier 3, which involved the use of molecular dynamics simulations and electron coupling calculations to predict differences in charge transport between the three materials. The three were explored experimentally through synthesis and device fabrication. The singlet, triplet, and frontier orbital energies computed using single molecule DFT calculations (tiers 1 and 2) were consistent with the experimental values in fluid solution, and the multi scale modeling scheme (tier 3) correctly predicted the poor device performance of one material. Here, we conclude that screening host materials using only single molecule quantum mechanical data was not sufficient to predict whether a given material would make a good OLED host with certainty, however they can be used to screen out materials that are destined to fail due to low singlet/triplet energies or a poor match of the frontier orbital energies to the dopant or transport materials.
Symmetry breaking charge transfer as a means to study electron transfer with no driving force
Symmetry breaking charge transfer (SBCT) is a process where a symmetrically disposed pair of identical chromophores forms a charge transfer excited state with the hole and electron on different chromophores, i.e. chr–chr + hν → chr + –chr – . Herein we explore this process in two dipyrrin-based bichromophoric systems. One of these bisdipyrrins involved a pair of BODIPY chromophores linked by a single bond at their meso-positions (compound 1) and the other involved two dipyrrin ligands coordinated in a tetrahedral geometry at the Zn 2+ ion (compound 2). Both compounds show rapid SBCT in polar solvents and only dipyrrin based emission in nonpolar solvents, the latter arising from a dipyrrin localized excited sate (LE). By “tuning” the solvent polarity the equilibrium between the LE and SBCT states can be shifted to favor either state. Ultrafast transient absorption spectroscopy (TA) was used to probe the kinetics of the charge transfer for 2 in solvents where the electron transfer is endergonic, exergonic and has a ΔG close to zero. Our TA derived rates were used to predict fluorescence efficiencies in each of the different solvent systems and showed a good correspondence to measured values. Detailed density functional theory (DFT) and time dependent DFT were used to model the ground states as well as the LE and SBCT states of 1 and 2, in both polar and nonpolar media. Lastly, the ground and LE excited states show small dipole moments, while the SBCT states show dipole moments of 16.4 and 20.3 D for 1 and 2, respectively.
Understanding molecular fragmentation in blue phosphorescent organic light-emitting devices
Not provided.
Organic electroluminescent devices
An organic light emitting device is disclosed in which the emissive dopant material in its organic emissive layer is an organic phosphorescent emissive material and a neat film of the organic phosphorescent emissive material is disposed between the organic emissive layer and the anode as an electron blocking layer.
Organic photosensitive devices with exciton-blocking charge carrier filters
Disclosed herein are organic photosensitive devices including at least one exciton-blocking charge carrier filter. The filters comprise a mixture of at least one wide energy gap material and at least one electron or hole conducting material. As described herein, the novel filters simultaneously block excitons and conduct the desired charge carrier (electrons or holes).