Engineering Papers⌕ Search

Engineering topics

Thomas, S. D.

Publications and source records attributed to Thomas, S. D..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Cryogenic Propellant Storage and Transfer Technology Demonstration: Prephase A Government Point-of-Departure Concept Study

The primary purpose of this study was to define a point-of-departure prephase A mission concept for the cryogenic propellant storage and transfer technology demonstration mission to be conducted by the NASA Office of the Chief Technologist (OCT). The mission concept includes identification of the cryogenic propellant management technologies to be demonstrated, definition of a representative mission timeline, and definition of a viable flight system design concept. The resulting mission concept will serve as a point of departure for evaluating alternative mission concepts and synthesizing the results of industry- defined mission concepts developed under the OCT contracted studies

Mulqueen, J. A.↗
NASA NTRS2008

Assessment of Near-Field Sonic Boom Simulation Tools

A recent study for the Supersonics Project, within the National Aeronautics and Space Administration, has been conducted to assess current in-house capabilities for the prediction of near-field sonic boom. Such capabilities are required to simulate the highly nonlinear flow near an aircraft, wherein a sonic-boom signature is generated. There are many available computational fluid dynamics codes that could be used to provide the near-field flow for a sonic boom calculation. However, such codes have typically been developed for applications involving aerodynamic configuration, for which an efficiently generated computational mesh is usually not optimum for a sonic boom prediction. Preliminary guidelines are suggested to characterize a state-of-the-art sonic boom prediction methodology. The available simulation tools that are best suited to incorporate into that methodology are identified; preliminary test cases are presented in support of the selection. During this phase of process definition and tool selection, parallel research was conducted in an attempt to establish criteria that link the properties of a computational mesh to the accuracy of a sonic boom prediction. Such properties include sufficient grid density near shocks and within the zone of influence, which are achieved by adaptation and mesh refinement strategies. Prediction accuracy is validated by comparison with wind tunnel data.

Casper, J. H.↗
NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗
NASA NTRS1985

A consistent spatial differencing scheme for the transonic full-potential equation in three dimensions

A full-potential steady transonic wing flow solver has been modified so that freestream density and residual are captured in regions of constant velocity. This numerically precise freestream consistency is obtained by slightly altering the differencing scheme without affecting the implicit solution algorithm. The changes chiefly affect the fifteen metrics per grid point, which are computed once and stored. With this new method, the outer boundary condition is captured accurately, and the smoothness of the solution is especially improved near regions of grid discontinuity.

Thomas, S. D.↗
NASA NTRS1985

Computational aspects of zonal algorithms for solving the compressible Navier-Stokes equations in three dimensions

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The flow field immediately adjacent to the wing surface is resolved with fine grid zones and solved using a Navier-Stokes algorithm. Flow field regions removed from the wing are resolved with less finely clustered grid zones and are solved with an Euler algorithm. Computational issues associated with this zonal approach, including data base management aspects, are discussed. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects. Additional cases with significant shock induced separation on the upper wing surface are also presented.

Holst, T. L.↗
NASA NTRS1985

Numerical solution of transonic wing flows using an Euler/Navier-Stokes zonal approach

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The grid zones immediately adjacent to the wing surface are suitably clustered and solved with the Navier-Stokes equations. Grid zones removed from the wing are less finely clustered and are solved with the Euler equations. Wind tunnel wall effects are easily and accurately modeled with the new grid-zoning algorithm because the wind tunnel grid is constructed as an exact subset of the corresponding free-air grid. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects and shock-induced separation on the upper wing surface.

Holst, T. L.↗
NASA NTRS1984

Transonic Airfoil Analysis

Program uses fast iteration scheme for solving transonic flow field around arbitrary airfoils. Transonic Airfoil Analysis Computer Code, TAIR, employs fast, fully implicit algorithm to solve conservative full-potiential equation for steady transonic flow field about arbitrary airfoil immersed in subsonic free stream. TAIR written in FORTRAN IV.

Holst, T. L.↗
NASA NTRS1984

A fast viscous correction method for full-potential transonic wing analysis

An analysis of the transonic flowfield around a three-dimensional wing is carried out using a strip method. Attention is given to the boundary layer growth in the streamwise direction. A viscous correction technique is defined for the TWING code for solving the full potential equations. A viscous ramp at the base of a shock is superimposed on the boundary layer displacement thickness generated by an integral boundary layer method. A relationship is then obtained between the effective displacement thickness and a vertical component of the surface velocity, a transpirational boundary condition. The viscous correction is found to be unnecessary in weak shock conditions but gives a better shock position and pressure distribution in a strong shock condition when compared with data from an ONERA M6 airfoil and the Hinson and Burdges (1980) Wing A.

Lee, S. C.↗
NASA NTRS1983

Numerical computation of transonic flow about wing-fuselage configurations on a vector computer

The transonic wing analysis code TWING, which uses the AF2 relaxation algorithm, has been vectorized to run on the Cray-1S computer. Vectorization of this code improved computational efficiency over that of the CDC 7600 computer by factors of 11 to 13. The improvement compares favorably with the prediction of a theoretical performance model. A convenient generalization now permits the treatment of rudimentary wing-fuselage combinations. Flow predictions for a transport configuration in both isolated-wing and wing-fuselage modes show the expected trends in shock strength and position when compared with wind-tunnel results. An isolated fighter wing is examined in terms of execution time on three different computers and in comparison with experimental data. The computational fluid dynamics code produced during this study is a careful union of an efficient three-dimensional, transonic, numerical algorithm and the vector features presently available on modern computers.

Thomas, S. D.↗
NASA NTRS1983

The efficient solution of transonic wing flow fields

An evaluation of the transonic-wing-analysis computer code TWING is presented. TWING utilizes a fully implicit, approximate-factorization iteration scheme to solve the full-potential equation in conservative form. A numerical elliptic-solver grid-generation scheme is used to generate the required finite-difference mesh. Several wing configurations have been analyzed, and comparisons of computed results have been made with available experimental data. Results indicate that the code is robust, accurate (when significant viscous effects are not present), and efficient. TWING generally produces solutions an order of magnitude faster than other conservative, full-potential codes using successive-line overrelaxation. The present method is applicable to a wide range of isolated wing configurations, including high-aspect-ratio transport wings and low-aspect-ratio, high-sweep, fighter configurations.

Holst, T. L.↗
NASA NTRS1982

Recent applications of the transonic wing analysis computer code, TWING

An evaluation of the transonic-wing-analysis computer code TWING is given. TWING utilizes a fully implicit approximate factorization iteration scheme to solve the full potential equation in conservative form. A numerical elliptic-solver grid-generation scheme is used to generate the required finite-difference mesh. Several wing configurations were analyzed, and the limits of applicability of this code was evaluated. Comparisons of computed results were made with available experimental data. Results indicate that the code is robust, accurate (when significant viscous effects are not present), and efficient. TWING generally produces solutions an order of magnitude faster than other conservative full potential codes using successive-line overrelaxation. The present method is applicable to a wide range of isolated wing configurations including high-aspect-ratio transport wings and low-aspect-ratio, high-sweep, fighter configurations.

Subramanian, N. R.↗
NASA NTRS1982

Numerical solution of transonic wing flow fields

A fast, fully implicit, approximate factorization algorithm designed to solve the conservative full-potential equation is used to compute lifting-wing flow fields with embedded transonic flow. The computer program (TWING - transonic wing analysis) uses an elliptic-solver numerical grid-generation routine and is capable of analyzing arbitrary wing geometries with sweep, twist, taper, and section variation. Computed flowfield results for several wing geometries are presented; they demonstrate substantial improvement in convergence speed relative to the FL028 computer code.

Holst, T. L.↗
NASA NTRS1981

TAIR: A transonic airfoil analysis computer code

The operation of the TAIR (Transonic AIRfoil) computer code, which uses a fast, fully implicit algorithm to solve the conservative full-potential equation for transonic flow fields about arbitrary airfoils, is described on two levels of sophistication: simplified operation and detailed operation. The program organization and theory are elaborated to simplify modification of TAIR for new applications. Examples with input and output are given for a wide range of cases, including incompressible, subcritical compressible, and transonic calculations.

Dougherty, F. C.↗