Engineering Papers⌕ Search

Engineering topics

Thomas, James L.

Publications and source records attributed to Thomas, James L..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Navier-Stokes solutions about the F/A-18 wing-LEX-fuselage configuration with multi-block structured grids

Three-dimensional thin-layer Navier-Stokes computations are presented for the F/A-18 configuration. The modeled configuration includes an accurate surface representation of the fuselage, leading-edge-extension, as well as the wing with and without leading-edge-flap deflection. A multi-block structured volume grid with various topologies is generated using transfinite interpolation technique. The flowfield domain is divided into twenty blocks, each representing a particular geometrical complexity of the configuration. The results are obtained from an algorithm for solving the compressible Navier-Stokes equations that incorporates an upwind-biased, flux-difference-splitting approach. In addition, a newly developed capability that allows for generalized surface patching among blocks is employed. Turbulent results are presented for flow conditions that correspond to recent NASA F/A-18 High Alpha Research Vehicle flight experiments. Good correlations between the computations and the flight test results are disclosed for both surface flow patterns as well as surface pressure distributions.

Ghaffari, Farhad↗
NASA NTRS1991

Computational fluid dynamics for hypersonic airbreathing aircraft

A development status evaluation is presented for CFD methods applicable to fuselage-integrated scramjet powerplant incorporating hypersonic vehicles; these methods are critically important due to the unavailability of experimental facilities for such elevated Mach number/high-enthalphy conditions. Advancements are required in algorithm robustness and speed, geometric flexibility, and the inclusion of more complete flow physics. The most serious deficiencies lie in turbulence modeling, the lack of complete transition-prediction methods, and combustion modeling.

Thomas, James L.↗
NASA NTRS1991

Grid-refinement study of hypersonic laminar flow over a 2-D ramp

Computations were made for those test cases of Problem 3 which were designated as laminar flows, viz., test cases 3.1, 3.2, 3.4, and 3.5. These test cases corresponded to flows over a flat plate and a compression ramp at high Mach number and at high Reynolds number. The computations over the compression ramps indicate a substantial streamwise extent of separation. Based on previous experience with separated laminar flows at high Mach numbers which indicated a substantial effect with spatial grid refinement, a series of computations with different grid sizes were performed. Also, for the flat plate, comparisons of the results for two different algorithms were made.

Thomas, James L.↗
NASA NTRS1990

Navier-Stokes and Euler solutions for lee-side flows over supersonic delta wings. A correlation with experiment

An Euler flow solver and a thin layer Navier-Stokes flow solver were used to numerically simulate the supersonic leeside flow fields over delta wings which were observed experimentally. Three delta wings with 75, 67.5, and 60 deg leading edge sweeps were computed over an angle-of-attack range of 4 to 20 deg at a Mach number 2.8. The Euler code and Navier-Stokes code predict equally well the primary flow structure where the flow is expected to be separated or attached at the leading edge based on the Stanbrook-Squire boundary. The Navier-Stokes code is capable of predicting both the primary and the secondary flow features for the parameter range investigated. For those flow conditions where the Euler code did not predict the correct type of primary flow structure, the Navier-Stokes code illustrated that the flow structure is sensitive to boundary layer model. In general, the laminar Navier-Stokes solutions agreed better with the experimental data, especially for the lower sweep delta wings. The computational results and a detailed re-examination of the experimental data resulted in a refinement of the flow classifications. This refinement in the flow classification results in the separation bubble with the shock flow type as the intermediate flow pattern between separated and attached flows.

Mcmillin, S. Naomi↗
NASA NTRS1990

Transonic Navier-Stokes solutions about a complex high-speed accelerator configuration

Three-dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model which includes wing, body, fillets, and a no-flow through engine nacelle. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporates an upwind-biased, flux-vector-splitting approach along with longitudinally-patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at freestream Mach number equal to 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Ghaffari, Farhad↗
NASA NTRS1990

An embedded grid formulation applied to a delta wing

Applications using a three-dimensional embedded grid scheme are made to high angle of attack viscous flow over two bodies: a slender cone using the conical approximation and a 75 deg swept delta wing. The embedded grids are used principally to improve the numerical resolution of the separated vortical flow above the body. Detailed comparisons are made with experimental measurements of the velocity field over the delta wing. The prediction of the maximum steamwise velocity is improved using two levels of embedded grid refinement but is still less than the experimental measurements available from a laser velocimeter.

Krist, Sherrie L.↗
NASA NTRS1990

A computational study of incipient leading-edge separation on a 65-deg delta wing at M = 1.60

A computational study on a 65-deg delta wing at a freestream Mach number of 1.60 has been conducted by obtaining conical Reynolds-averaged Navier-Stokes solutions on a parametric series of geometries which varied in leading-edge radius and/or circular-arc camber. The computational results showed that increasing leading-edge radius or camber can delay the onset of leading-edge separation on the leeside of a delta wing at a specific angle of attack. Reynolds number was varied from 1 x 10 to the 6th to 5 x 10 to the 6th for a turbulent boundary-layer and was shown to have a minor effect on the effectiveness of leading-edge radius and/or camber in delaying the onset of leading-edge separation. Both laminar and turbulent boundary-layer models were investigated at a Reynolds number of 1 x 10 to the 6th, and the predicted flow pattern was found to change from attached flow for the turbulent boundary-layer model to separated flow for the laminar boundary-layer model. Based upon these results, three wind-tunnel models have been designed to be tested in the Langley Unitary Plan Wind Tunnel.

Mcmillin, S. Naomi↗
NASA NTRS1990

A patched-grid algorithm for complex aircraft configurations

A patched-grid algorithm for the analysis of complex configurations with an implicit, upwind-biased Navier-Stokes solver is presented. Through the use of a generalized coordinate transformation at the zonal interface between two or more blocks, the algorithm can be applied to highly stretched viscous grids and to arbitrarily-shaped patch boundaries. Applications are made to the SR71 reconnaissance aircraft in a high-altitude environment at a supersonic speed and to the F/A-18 forebody-strake configuration at subsonic, high-alpha conditions, in support of the NASA High-Alpha Research Program.

Walters, Robert W.↗
NASA NTRS1989

A comparative study of Navier-Stokes codes for high-speed flows

A comparative study was made with four different codes for solving the compressible Navier-Stokes equations using three different test problems. The first of these cases was hypersonic flow through the P8 inlet, which represents inlet configurations typical of a hypersonic airbreathing vehicle. The free-stream Mach number in this case was 7.4. This 2-D inlet was designed to provide an internal compression ratio of 8. Initial calculations were made using two state-of-the-art finite-volume upwind codes, CFL3D and USA-PG2, as well as NASCRIN, a code which uses the unsplit finite-difference technique of MacCormack. All of these codes used the same algebraic eddy-viscosity turbulence model. In the experiment, the cowl lip was slightly blunted; however, for the computations, a sharp cowl leading edge was used to simplify the construction of the grid. The second test problem was the supersonic (Mach 3.0) flow in a three-dimensional corner formed by the intersection of two wedges with equal wedge angles of 9.48 degrees. The flow in such a corner is representative of the flow in the corners of a scramjet inlet. Calculations were made for both laminar and turbulent flow and compared with experimental data. The three-dimensional versions of the three codes used for the inlet study (CFL3D, USA-PG3, and SCRAMIN, respectively) were used for this case. For the laminar corner flow, a fourth code, LAURA, which also uses recently-developed upwind technology, was also utilized. The final test case is the two-dimensional hypersonic flow over a compression ramp. The flow is laminar with a free-stream Mach number of 14.1. In the experiment, the ramp angle was varied to change the strength of the ramp shock and the extent of the viscous-inviscid interaction. Calculations were made for the 24-degree ramp configuration which produces a large separated-flow region that extends upstream of the corner.

Rudy, David H.↗
NASA NTRS1989

An embedded grid formulation applied to delta wings

An embedded grid algorithm for the Euler and/or Navier-Stokes equations is developed and applied to delta wings at high angles of attack in low speed flow. The Navier-Stokes code is an implicit, finite volume algorithm, using flux difference splitting for the convective and pressure terms and central differencing for the viscous and heat transfer terms. Calculations are compared with detailed experimental results over an angle of attack range up to and beyond the maximum lift coefficient, corresponding to vortex breakdown at the trailing edge, for a delta wing nominally of unit aspect ratio. The results indicate that the overall flowfield, including surface pressures, surface streamlines, and vortex trajectories, can be simulated accurately with the global grid version of the present algorithm. However, comparison of computed velocities and vorticity with experimentally measured off-body values at an angle of attack of 20.5 deg indicates the core region is substantially more diffuse in the computations than that measured with either a five-hole probe or a laser velocimeter. Embedded grids, used to improve the numerical discretization in the core region, are formulated within the framework of the implicit, upwind-biased multi-grid algorithm. Structured levels of local nested refinements are made. Three-dimensional results for both Euler and Navier-Stokes calculations are shown, with up to 3 levels of embedded refinement. The embedding procedure was effective in eliminating a crossflow secondary separation produced in the Euler solutions on coarse grids.

Thomas, James L.↗
NASA NTRS1989

Transonic Navier-Stokes solutions of three-dimensional afterbody flows

The performance of a three-dimensional Navier-Stokes solution technique in predicting the transonic flow past a nonaxisymmetric nozzle was investigated. The investigation was conducted at free-stream Mach numbers ranging from 0.60 to 0.94 and an angle of attack of 0 degrees. The numerical solution procedure employs the three-dimensional, unsteady, Reynolds-averaged Navier-Stokes equations written in strong conservation form, a thin layer assumption, and the Baldwin-Lomax turbulence model. The equations are solved by using the finite-volume principle in conjunction with an approximately factored upwind-biased numerical algorithm. In the numerical procedure, the jet exhaust is represented by a solid sting. Wind-tunnel data with the jet exhaust simulated by high pressure air were also obtained to compare with the numerical calculations.

Compton, William B., III↗
NASA NTRS1989

A validation study of four Navier-Stokes codes for high-speed flows

A code validation study has been conducted for four different codes for solving the compressible Navier-Stokes equations. Computations for a series of nominally two-dimensional high-speed laminar separated flows were compared with detailed experimental shock-tunnel results. The shock wave-boundary layer interactions considered were induced by a compression ramp in one case and by an externally-generated incident shock in the second case. In general, good agreement was reached between the grid-refined calculations and experiment for the incipient- and small-separation conditions. For the most highly separated flow, three-dimensional calculations which included the finite-span effects of the experiment were required in order to obtain agreement with the data. The finite-span effects were important in determining the extent of separation as well as the time required to establish the steady-flow interaction. The results presented provide a resolution of discrepancies with the experimental data encountered in several recent computational studies.

Rudy, David H.↗