Engineering Papers⌕ Search

Engineering topics

Terrones, Guillermo

Publications and source records attributed to Terrones, Guillermo.

Finite boundary effects on the spherical Rayleigh–Taylor instability between viscous fluids

For the Rayleigh–Taylor unstable arrangement of a viscous fluid sphere embedded in a finite viscous fluid spherical shell with a rigid boundary and a radially directed acceleration, a dispersion relation is developed from a linear stability analysis using the method of normal modes. [Formula: see text] is the radially directed acceleration at the interface. ρ i denotes the density, μ i is the viscosity, and R i is the radius, where i = 1 is the inner sphere and i = 2 is the outer sphere. The dispersion relation is a function of the following dimensionless variables: viscosity ratio [Formula: see text], density ratio [Formula: see text], spherical harmonic mode n, [Formula: see text], [Formula: see text], and the dimensionless growth rate [Formula: see text], where σ is the exponential growth rate. We show that the boundedness provided by the outer spherical shell has a strong influence on the instability behavior, which is reflected not only in the modulation of the growth rate but also in the selection of the most unstable modes that are physically possible. This outer boundary effect is quantified by the relative magnitude of the radius ratio H. We find that when H is close to unity, lower order harmonics are excluded from becoming the most unstable within a vast region of the parameter space. In other words, the effect of H has precedence over the other controlling parameters d, B, and a wide range of s in establishing what the lowest most unstable mode can be. When H ~ 1, low order harmonics can become the most unstable only for s >> 1. However, in the limit when s → ∞, we show that the most unstable mode is n = 1 and derive the dispersion relation in this limit. The exclusion of most unstable low order harmonics caused by a finite outer boundary is not realized when the outer boundary extends beyond a certain threshold length-scale in which case all modes are equally possible depending on the value of B.

74 ATOMIC AND MOLECULAR PHYSICS↗

PAGOSA Simulations for the LANL Blast Tube

A parameter study was performed for the Los Alamos National Laboratory Blast Tube to tune geometry to best replicate peak blast pressures from experiments. Charge placement, reflecting wall thickness, flange gap width, and reflecting wall stand-off were sampled using a Latin-Hypercube design to train a Radial Basis Function Network surrogate model. This surrogate model was then used with a Nelder - Mead Simplex minimization routine to minimize error for the surrogate predictions.

47 OTHER INSTRUMENTATION↗

Hydrocode simulations of a hypervelocity impact experiment over a range of velocities

This study investigates how the Eulerian hydrocode PAGOSA performs while simulating a hypervelocity impact experiment of stainless steel 304-L into aluminum 6061-T6. The specifications of the simulation were established in a paper detailing an experiment conducted at the Atomic Weapons Establishment (AWE) in the UK and the Centre d’Etudes de Gramet (CEG) in France. A variety of strength models and equations of state are employed under several different mesh sizes. The results display an excellent comparison with the experimental data and demonstrate dramatic differences in impacted crater geometries over various strength models and mesh sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cyclops I: Modeling Error Study for Inertially Confined Detonation of Insensitive High Explosive (IHE) PBX-9502

A validation study is performed using the hydrodynamics code PAGOSA to assess the accuracy of reflected shock, burn front propagation, and Photon Doppler Velocimetry (PDV) predictions using several burn models and strength models. Experimental data collected from proton radiography (pRad) is compared to burn front propagation times and reflected shock patterns. Burn front isochrones are computed and the lag time for the burn front is quantified for a given burn model. The effect of strength models and damage are assessed by comparison of simulations to experimental PDV data.

97 MATHEMATICS AND COMPUTING↗

Rayleigh-Taylor instability at spherical interfaces between viscous fluids: Fluid/vacuum interface

For a spherical interface of radius R separating two different homogeneous regions of incompressible viscous fluids under the action of a radially directed acceleration, we perform a linear stability analysis in terms of spherical surface harmonics Y n to derive the dispersion relation. The instability behavior is investigated by computing the growth rates and the most-unstable modes as a function of the spherical harmonic degree n. This general methodology is applicable to the entire parameter space spanned by the Atwood number, the viscosity ratio, and the dimensionless number B = (α R Ρ² 2 /μ² ² )¹ / ³ R (where α R , Ρ 2 and μ 2 are the local radial acceleration at the interface, and the density and viscosity of the denser overlying fluid, respectively). While the mathematical formulation here is general, this paper focuses on instability that arises at a spherical viscous fluid/vacuum interface as there is a great deal to be learned from the effects of one-fluid viscosity and sphericity alone. To quantify and understand the effect that curvature and radial accelerationhave on the Rayleigh-Taylor instability, a comparison of the growth rates, under homologous driving conditions, between the planar and spherical interfaces is performed. The derived dispersion relation for the planar interface accounts for an underlying finite fluid region of thickness L and normal acceleration α R . Under certain conditions, the development of the most-unstable modes at a spherical interface can take place via the superposition of two adjacent spherical harmonics Y n and Y n+1 . This bimodality in the evolution of disturbances in the linear regime does not have a counterpart in the planar configuration where the most-unstable modes are associated with a unique wave number.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ejecta model development at pRad (u)

In July 2009 we fielded three explosively (HE) driven Richtmyer-Meshkov instability experiments at the LANSCE Proton Radiography Facility (pRad), and in August of 2009 we fielded one flyer plate experiment on the pRad 40 mm powder gun. One HE experiment was done in vacuum, and the other two within four atmospheres of noble gasses: Xe and Ne. These two gases were chosen to study the viscous effects on ejecta formation. It is unexpected, but the viscosity {eta} of Ne is twice that of Xe, and, due to the atomic mass difference between the two, the kinematic viscosity ({eta}/{rho}) of Ne is about ten times that of Xe. The results showed that ejecta formation is sensitively linked to the gas density, which implies that the Weber number is more important in ejecta formation than the Reynolds number.

99 GENERAL AND MISCELLANEOUS↗

Effects of g-jitter and cross-diffusion on the onset of convection in doubly diffusive systems

The effects of a modulated gravity field in doubly diffusive layers with and without cross-diffusion are studied. Attention is focused on the determination of linear stability criteria for such systems. Floquet theory is used to establish the stability criteria by a systematic analysis of the topology of the neutral curves from which stability boundaries can be constructed. Convective stability boundaries for gravity-modulated doubly cross-diffusive systems are presented for the cases of dynamically free and rigid boundaries. Two physically different forms of layer stratification are considered: (1) imposed independent gradients of two components and (2) a solute gradient induced by a fixed temperature gradient.

Terrones, Guillermo↗