Engineering Papers⌕ Search

Engineering topics

Tapley, B. D.

Publications and source records attributed to Tapley, B. D..

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Estimation of unmodeled forces on a low-thrust space vehicle

The application of a sequential estimation algorithm, which compensates for random errors in the dynamic model, to the problem of estimating the state of a continuously thrusting solar electric propulsion space vehicle is investigated. The dynamic model errors, due to random anomalies in the propulsion system, are approximated successfully by both first order and second order Gauss-Markov processes to obtain a more accurate and stable orbit determination algorithm. The importance of correct dynamic and measurement modeling in achieving accurate estimates is demonstrated.

Tapley, B. D.↗
NASA NTRS1975

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗
NASA NTRS1975

New method for propagating the square root covariance matrix in triangular form

A method proposed by Potter of applying the Kalman-Bucy filter to the problem of estimating the state of a dynamic system is described, in which the square root of the state error covariance matrix is used to process the observations. A new technique which propagates the covariance square root matrix in lower triangular form is given for the discrete observation case. The technique is faster than previously proposed algorithms and is well-adapted for use with the Carlson square root measurement algorithm.

Choe, C. Y.↗
NASA NTRS1975

Sequential filtering applied to the determination of tracking station locations

The extended sequential filter has been applied to the problem of dynamically determining the geocentric coordinates of two laser satellite tracking stations. This filter provides significant advantages over the classical batch methods through (1) fewer iterations required for convergence, (2) wider radius of convergence, and (3) availability of the parameter estimate evolution. Processing the data sequentially readily identifies the data arcs required to minimize the effects of geopotential model errors. By means of the Smithsonian standard earth 2 and the Goddard earth model 1 geopotentials to reduce laser range observations of the Beacon Explorer-C satellite, it is demonstrated that a two-pass arc is optimal for estimating the height of one station and all coordinates of the second station while minimizing the effect of geopotential model error. These two-pass estimates are in good agreement with other determinations that utilize considerably more data as well as different satellites.

Schutz, B. E.↗
NASA NTRS1974

Lunar orbit determination in the presence of unmodeled accelerations

A technique for estimating the state of an artificial satellite in the presence of unmodeled accelerations is presented. The unmodeled acceleration is approximated by a first-order Gauss-Markov sequence which can be separated into a timewise-correlated component and a purely random component. Using this approximation, a sequential procedure for estimating the position, velocity, and the unmodeled acceleration is developed. The method is evaluated by reducing range-rate observations obtained by tracking the Apollo 10 and 11 spacecraft during the lunar-orbit phase of the mission. Numerical results are presented which show that the observation residual pattern lies within the observation noise standard deviation. The values of the estimated components of the unmodeled acceleration are repeatable from orbit to orbit within a given mission and from mission to mission when the same ground track is covered. Finally, the variation in the radial component of the unmodeled acceleration shows a high correlation with the reported location of the lunar surface mascons.

Ingram, D. S.↗
NASA NTRS1972

Navigation strategy and filter design for solar electric missions

Methods which have been proposed to improve the navigation accuracy for the low-thrust space vehicle include modifications to the standard Sequential- and Batch-type orbit determination procedures and the use of inertial measuring units (IMU) which measures directly the acceleration applied to the vehicle. The navigation accuracy obtained using one of the more promising modifications to the orbit determination procedures is compared with a combined IMU-Standard. The unknown accelerations are approximated as both first-order and second-order Gauss-Markov processes. The comparison is based on numerical results obtained in a study of the navigation requirements of a numerically simulated 152-day low-thrust mission to the asteroid Eros. The results obtained in the simulation indicate that the DMC algorithm will yield a significant improvement over the navigation accuracies achieved with previous estimation algorithms. In addition, the DMC algorithms will yield better navigation accuracies than the IMU-Standard Orbit Determination algorithm, except for extremely precise IMU measurements, i.e., gyroplatform alignment .01 deg and accelerometer signal-to-noise ratio .07. Unless these accuracies are achieved, the IMU navigation accuracies are generally unacceptable.

Tapley, B. D.↗
NASA NTRS1972

The computation of optimal control programmes using a modified successive sweep method.

A second-order method for numerically solving control optimization problems has been developed. The method, referred to as the modified sweep method (MSM), differs from the successive sweep method (SSM) proposed by McReynolds and Bryson (1965) in that the conditions for local control optimality are used to determine the control as an explicit function of the state variables and time. The control is eliminated from the problem and the solution to the resulting two-point boundary value problem can be obtained by linear perturbation methods. The modified sweep method proposed here uncouples the perturbation equations for the state variables and the Lagrange multipliers by using a generalized matrix-Riccati transformation of variables. The resulting algorithm for the numerical iteration process is concerned with determining the initial values of a set of Lagrange multipliers rather than correcting a numerical control programme over the entire time interval of interest.

Colunga, D.↗
NASA NTRS1972

Orbit determination in the presence of unmodeled accelerations.

In the investigation discussed here, the unmodeled acceleration is approximated as a first-order stationary Gauss-Markov process which can be separated into a time wise correlated component and a purely random component. An extended form of the Kalman-Bucy filter is used to estimate the state and the unmodeled accelerations at each observation epoch. Applications of the estimation algorithm to simulated data and to tracking data obtained during the Apollo 10 and 11 missions indicate that a more accurate estimate of the state is obtained using the algorithm and that the estimated values of the unmodeled accelerations can be correlated with physical phenomena neglected by the mathematical model.

Tapley, B. D.↗
NASA NTRS1972

Nonlinear estimation theory applied to the interplanetary orbit determination problem.

Martingale theory and appropriate smoothing properties of Loeve (1953) have been used to develop a modified Gaussian second-order filter. The performance of the filter is evaluated through numerical simulation of a Jupiter flyby mission. The observations used in the simulation are on-board measurements of the angle between Jupiter and a fixed star taken at discrete time intervals. In the numerical study, the influence of each of the second-order terms is evaluated. Five filter algorithms are used in the simulations. Four of the filters are the modified Gaussian second-order filter and three approximations derived by neglecting one or more of the second-order terms in the equations. The fifth filter is the extended Kalman-Bucy filter which is obtained by neglecting all of the second-order terms.

Tapley, B. D.↗
NASA NTRS1972

Nonlinear estimation theory applied to the interplanetary orbit determination problem.

The performance of a second order filter which is identical to the algorithm developed by Athans et al. (1968) for the scalar case is evaluated through numerical simulation of a Jupiter flyby mission. The observations used in the simulation are on-board measurements of the angle between Jupiter and a fixed star taken at discrete time intervals. In the numerical study, the influence of each of the second order terms is evaluated.

Tapley, B. D.↗
NASA NTRS1971

Optimum impulsive midcourse guidance with control dependent errors.

The problem of determining the optimum guidance policy for an interplanetary spacecraft is treated as a stochastic optimal control problem. An algorithm for computing the optimum velocity correction and the optimum execution time (with allowance for correction-dependent errors) is derived in the case of a single midcourse correction. The performance index was chosen to be an upper bound for the probability that the mission fails, and it is defined as a function of the maximum allowable velocity correction and the maximum allowable deviation of the terminal state. Numerical results obtained for a Jupiter fly-by mission indicate that the execution errors have a significant influence on the performance index, but an acceptably small upper bound on the probability of mission failure can be obtained for sufficiently small execution errors.

Tapley, B. D.↗