Engineering Papers⌕ Search

Engineering topics

Tang, Ming

Publications and source records attributed to Tang, Ming.

80 records · Page 5

Glass ceramic development for the combined fission products streams

After immobilization, nuclear waste is stored for minimally hundreds of years. In waste-forms {beta}, {gamma}-radiation are main causes for damage. The objectives is to test radiation stability of PNNL synthesized glass-ceramics. Monitoring was done looking for changes in the microstructure or phase composition. These are designed for immobilization of: lanthanides, alkaline metals, alkaline arths, transition metals, high molybdenum content - 6.94%, and multi-phase glass-ceramic. The conclusion on aqueous stability is the PNNL glass ceramics - glass phase erodes but crystalline phases don't and it's more resistant to corrosion than vitrified waste. Leachability tests in accordance with standards will be performed and the results will be compared to XRD.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

VITAL NMR: Using Chemical Shift Derived Secondary Structure Information for a Limited Set of Amino Acids to Assess Homology Model Accuracy

Homology modeling is a powerful tool for predicting protein structures, whose success depends on obtaining a reasonable alignment between a given structural template and the protein sequence being analyzed. In order to leverage greater predictive power for proteins with few structural templates, we have developed a method to rank homology models based upon their compliance to secondary structure derived from experimental solid-state NMR (SSNMR) data. Such data is obtainable in a rapid manner by simple SSNMR experiments (e.g., (13)C-(13)C 2D correlation spectra). To test our homology model scoring procedure for various amino acid labeling schemes, we generated a library of 7,474 homology models for 22 protein targets culled from the TALOS+/SPARTA+ training set of protein structures. Using subsets of amino acids that are plausibly assigned by SSNMR, we discovered that pairs of the residues Val, Ile, Thr, Ala and Leu (VITAL) emulate an ideal dataset where all residues are site specifically assigned. Scoring the models with a predicted VITAL site-specific dataset and calculating secondary structure with the Chemical Shift Index resulted in a Pearson correlation coefficient (-0.75) commensurate to the control (-0.77), where secondary structure was scored site specifically for all amino acids (ALL 20) using STRIDE. This method promises to accelerate structure procurement by SSNMR for proteins with unknown folds through guiding the selection of remotely homologous protein templates and assessing model quality.

59 BASIC BIOLOGICAL SCIENCES↗

Glass Ceramic Waste Forms for Combined CS+LN+TM Fission Products Waste Streams

In this study, glass ceramics were explored as an alternative waste form for glass, the current baseline, to be used for immobilizing alkaline/alkaline earth + lanthanide (CS+LN) or CS+LN+transition metal (TM) fission-product waste streams generated by a uranium extraction (UREX+) aqueous separations type process. Results from past work on a glass waste form for the combined CS+LN waste streams showed that as waste loading increased, large fractions of crystalline phases precipitated upon slow cooling. The crystalline phases had no noticeable impact on the waste form performance by the 7-day product consistency test (PCT). These results point towards the development of a glass ceramic waste form for treating CS+LN or CS+LN+TM combined waste streams. Three main benefits for exploring glass ceramics are: • Glass ceramics offer increased solubility of troublesome components in crystalline phases as compared to glass, leading to increased waste loading; • The crystalline network formed in the glass ceramic results in higher heat tolerance than glass; and • These glass ceramics are designed to be processed by the same melter technology as the current baseline glass waste form. It will only require adding controlled canister cooling for crystallization into a glass ceramic waste form. Highly annealed waste form (essentially crack free) with up to 50X lower surface area than a typical High-Level Waste (HLW) glass canister. Lower surface area translates directly into increased durability. This was the first full year of exploring glass ceramics for the Option 1 and 2 combined waste stream options. This work has shown that dramatic increases in waste loading are achievable by designing a glass ceramic waste form as an alternative to glass. Table S1 shows the upper limits for heat, waste loading (based on solubility), and the decay time needed before treatment can occur for glass and glass ceramic waste forms. The improvements are significant for both combined waste stream options in terms of waste loading and/or decay time required before treatment. For Option 1, glass ceramics show an increase in waste loading of 15 mass % and reduction in decay time of 24 years. Decay times of ≈50 years or longer are close to the expected age of the fuel that will be reprocessed when the modified open or closed fuel cycle is expected to be put into action. Option 2 shows a 2x to 2.5x increase in waste loading with decay times of only 45 years. Note that for Option 2 glass, the required decay time before treatment is only 35 years because of the waste loading limits related to the solubility of MoO 3 in glass. If glass was evaluated for similar waste loadings as those achieved in Option 2 glass ceramics, the decay time would be significantly longer than 45 years. These glass ceramics are not optimized, but already they show the potential to dramatically reduce the amount of waste generated while still utilizing the proven processing technology used for glass production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overpotential-Dependent Phase Transformation Pathways in Lithium Iron Phosphate Battery Electrodes

An objective in battery development for higher storage energy density is the design of compounds that can accommodate maximum ion concentration change over useful electrochemical windows. Not surprisingly, many storage compounds undergo phase transitions in-situ, including production of metastable phases. Unique to this environment is the frequent application of electrical over- and underpotentials, which are the electrical analogs to undercooling and superheating. Surprisingly, overpotential effects on phase stability and transformation mechanisms have not been studied in detail. Here we use synchrotron X-ray diffraction performed in-situ during potentiostatic and galvanostatic cycling, combined with phase-field modeling, to reveal a remarkable dependence of phase transition pathway on overpotential in the model olivine Li1-xFePO4. At both low (e.g., <20 mV) and high (>75 mV) overpotentials a crystal-to-crystal olivine transformation is preferred, whereas at intermediate overpotentials a crystalline-to-amorphous phase transition dominates. At nanoscale particle size, amorphization is further emphasized. Implications for battery use and design are considered.

43 PARTICLE ACCELERATORS↗

Swift heavy ion irradiation-induced microstructure modification on two delta-phase oxides: Sc4Zr3O12 and Lu4Zr3O12

Swift gold ions (185 MeV) were used to systematically investigate the radiation damage response of delta phase compounds Sc{sub 4}Zr{sub 3}O{sub 12} and Lu{sub 4}Zr{sub 3}O{sub 12} in the electronic energy loss regime. Ion irradiation-induced microstructural modifications were examined using X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD investigations indicate a phase transformation from ordered rhombohedral to disordered fluorite (O-D) in both compounds, with the Sc compound transforming at a higher ion fluence compared with the Lu compound. This result is consistent with our previous study on Sc{sub 4}Zr{sub 3}O{sub 12} and Lu{sub 4}Zr{sub 3}O{sub 12} under displacive radiation environment in which the nuclear energy loss is dominant. High resolution TEM revealed that individual ion tracks maintains crystalline structure where the core region experiences an O-D phase transformation. TEM observation also suggests that the O-D phase transformation occurs through the ion range after overlapping of ion tracks.

36 MATERIALS SCIENCE↗

Irradiation-induced amorphization and order-disorder transformation in the tungsten delta-phase oxides Yb6W1O12 and Y6W1O12

Polycrystalline Yb{sub 6}W{sub 1}O{sub 12} and Y{sub 6}W{sub 1}O{sub 12} samples, which possess rhombohedral symmetry (structure known as the {delta}-phase, closely related to cubic fluorite structure), were irradiated with 280 keV Kr{sup ++} ions to fluences up to 2 x 10{sup 20} ions/m{sup 2} at cryogenic temperature (100 K). Ion irradiation damage effects in these samples were examined using grazing incidence X-ray diffraction (GIXRD) and cross-sectional transmission electron microscopy (TEM). Irradiation-induced amorphization in both compounds has been observed by GIXRD and TEM, while the amorphization dose for Yb{sub 6}W{sub 1}O{sub 12} is lower than that for Yb{sub 6}W{sub 1}O{sub 12}. Experimental results also revealed that both irradiated samples experience an ordered rhombohedral to disordered cubic fluorite (O-D) transformation before amorphization. Factors influencing the irradiation damage response of these two compounds will be discussed in terms of cation radius ratio and cation antisite formation energy calculated by density functional theory (DFT).

36 MATERIALS SCIENCE↗

Interstellar SiC in the Murchison and Murray meteorites - Isotopic composition of Ne, Xe, Si, C, and N

Detailed ion-probe data are reported on Murchison and Murray C2 chondrites, along with noble-gas data on Murchison, with the purpose of characterizing the number and isotopic composition of independent SiC components and to link them to their stellar sources. Results show that coarse-grained and fine-grained SiC (totaling about 6-9 ppm of the two meteorites) contains record concentrations of two exotic components: Ne-E(H) (nearly monoisotopic Ne-22) and Se-S (enriched in isotopes 128, 130, and 132), respectively. The Ne-21 content was found to exceed up to 40-fold the content expected from the recent cosmic-ray irradiation, implying a presolar cosmic-ray exposure age of about 39 Ma. This age is much shorter that the predicted 500 Ma lifetime of refractory interstellar grains and implies either a selective interstellar destruction process for SiC, enhanced supernova activity in the protosolar neighborhood, or late outgassing of greater than 90 percent of the SiC.

Zinner, Ernst↗