Engineering Papers⌕ Search

Engineering topics

Tan, Sha

Publications and source records attributed to Tan, Sha.

42 records · Page 3

Vacancy‐Enabled O3 Phase Stabilization for Manganese‐Rich Layered Sodium Cathodes

Abstract Manganese‐rich layered oxide materials hold great potential as low‐cost and high‐capacity cathodes for Na‐ion batteries. However, they usually form a P2 phase and suffer from fast capacity fade. In this work, an O3 phase sodium cathode has been developed out of a Li and Mn‐rich layered material by leveraging the creation of transition metal (TM) and oxygen vacancies and the electrochemical exchange of Na and Li. The Mn‐rich layered cathode material remains primarily O3 phase during sodiation/desodiation and can have a full sodiation capacity of ca. 220 mAh g −1 . It delivers ca. 160 mAh g −1 specific capacity between 2–3.8 V with >86 % retention over 250 cycles. The TM and oxygen vacancies pre‐formed in the sodiated material enables a reversible migration of TMs from the TM layer to the tetrahedral sites in the Na layer upon de‐sodiation and sodiation. The migration creates metastable states, leading to increased kinetic barrier that prohibits a complete O3‐P3 phase transition.

Xiao, Biwei↗

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗

Microwave-Based Synthesis of Functional Morphological Variants and Carbon Nanotube-Based Composites of VS 4 for Electrochemical Applications

A novel facile, fast, and efficient microwave-assisted method was developed to synthesize a number of diverse nanostructured motifs (ranging from nanorods to nanoflowers) of VS 4 along with its associated composite heterostructures, VS 4 /multi-walled carbon nanotube (MWNT; i.e., multi-walled carbon nanotubes). Specifically, we have probed and correlated the effects of a number of specific experimental variables, including primarily precursor, solvent, temperature, and time. We noted that nanorods formed more readily with VO(acac) 2 as the vanadium precursor and n-methyl-2-pyrrolidone (NMP) as a polar reaction solvent. By contrast, we determined that hierarchical three-dimensional (3D) nanoflower-like assemblies, ranging in size from 100 to 200 nm in average diameter, could be controllably synthesized by using Na 3 VO 4 as the vanadium precursor and an aqueous water: polar solvent mixture as the reaction medium. We also observed that VS 4 disintegrates, when in the presence of either air, solution, or a combination of these environments, and established that the extent of VS4 nanorod decomposition could be almost fully prevented by storage under nitrogen. From an application’s perspective, our VS 4 is electrochemically active and shows behavior, consistent with the literature. In particular, as compared with pristine VS 4 nanorods alone, we observed enhanced electrochemical activity with (i) 3D hierarchical flower-like motifs, (ii) unique necklace-like VS 4 nanorod–MWNT composites, and (iii) samples in which as-prepared VS4 nanorods had been annealed. Moreover, we found that the rational application of specific physical and chemical processing treatments, such as (i) thermal annealing to improve crystallinity, (ii) the addition of MWNTs to form conductive composites, and (iii) the evolution of morphology from one-dimensional (1D) nanorods to more complex 3D nanoflowers, was favorable to the resulting electrochemical performance with respect to increasing stability and reversibility.

25 ENERGY STORAGE↗

Review on organosulfur materials for rechargeable lithium batteries

Organic electrode materials have been considered as promising candidates for the next generation rechargeable battery systems due to their high theoretical capacity, versatility, and environmentally friendly nature. Among them, organosulfur compounds have been receiving more attention in conjunction with the development of lithium-sulfur batteries. Usually, organosulfide electrodes can deliver relatively high theoretical capacity based on reversible breakage and formation of disulfide (S-S) bonds. Here, we provide an overview of organosulfur materials for rechargeable lithium batteries, including their molecular structural design, structure related electrochemical performance study as well as electrochemical performance optimization. In addition, recent progress of advanced characterization techniques for investigation of the structure and lithium storage mechanism of organosulfur electrodes are elaborated. To further understand the perspective application, additive effect of organosulfur compounds for lithium metal anodes, sulfur cathodes as well as high voltage inorganic cathode materials are reviewed with typical examples. Finally, some remaining challenges and perspective of the organosulfur compounds as lithium batteries components are also discussed. This review is intended to serve as a general guidance for researcher to facilitate the development of organosulfur compounds.

25 ENERGY STORAGE↗

Studying Catalytically Viable Single-Crystalline Metal Oxide Nanorods Using Synchrotron-Based Scanning Hard X-ray Microscopy

Synchrotron-based scanning hard X-ray microscopy (SHXM) was used to extract localized chemical and structural information within a system of model alkaline earth-metal tungstate nanorods, characterized by multiple chemical configurations. Specifically, we have highlighted the practical ability of SHXM to probe chemically distinctive nanoscale species, consisting of (i) chemically doped versus (ii) solid solution-state nanorods of comparable dimension, synthesized using a template-directed method under ambient conditions. Indeed, we show that SHXM can be used to map out elemental distributions within individual anisotropic nanorods with nanoscale resolution, coupled with chemical sensitivity and specificity. Complementary electrochemical results suggest the possibility of using these nanorods as support materials for electro-oxidation reactions within an acidic electrolyte medium. Our structural and chemical composition results have been corroborated using parallel lines of inquiry involving scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Furthermore, these measurements confirmed the relatively even and uniform distribution of the expected, individual elements within all of the nanorod samples tested.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Metabolic versatility of small archaea Micrarchaeota and Parvarchaeota

Small acidophilic archaea belonging to Micrarchaeota and Parvarchaeota phyla are known to physically interact with some Thermoplasmatales members in nature. However, due to a lack of cultivation and limited genomes on hand, their biodiversity, metabolisms, and physiologies remain largely unresolved. For this study, we obtained 39 genomes from acid mine drainage (AMD) and hot spring environments around the world. 16S rRNA gene based analyses revealed that Parvarchaeota were only detected in AMD and hot spring habitats, while Micrarchaeota were also detected in others including soil, peat, hypersaline mat, and freshwater, suggesting a considerable higher diversity and broader than expected habitat distribution for this phylum. Despite their small genomes (0.64-1.08 Mb), these archaea may contribute to carbon and nitrogen cycling by degrading multiple saccharides and proteins, and produce ATP via aerobic respiration and fermentation. Additionally, we identified several syntenic genes with homology to those involved in iron oxidation in six Parvarchae ota genomes, suggesting their potential role in iron cycling. However, both phyla lack biosynthetic pathways for amino acids and nucleotides, suggesting that they likely scavenge these biomolecules from the environment and/or other community members. Moreover, low-oxygen enrichments in laboratory confirmed our speculation that both phyla are microaerobic/anaerobic, based on several specific genes identified in them. Furthermore, phylogenetic analyses provide insights into the close evolutionary history of energy related functionalities between both phyla with Thermoplasmatales. These results expand our understanding of these elusive archaea by revealing their involvement in carbon, nitrogen, and iron cycling, and suggest their potential interactions with Thermoplasmatales on genomic scale.

59 BASIC BIOLOGICAL SCIENCES↗