Engineering topics

Tan, Eric (ORCID:0000000291102410)

Publications and source records attributed to Tan, Eric (ORCID:0000000291102410).

4 records

DOE OSTI2024

Task 3.1: Research and Development Guiding Technoeconomic Analysis and Life-Cycle Assessment

Technologies under development aim to increase yields of desired end products, reduce overall raw material costs, and/or develop more energy-efficient strategies for product recovery. Techno-economic analysis (TEA) and life-cycle assessments (LCA) help assure that economic and sustainability predictions of the technologies are unbiased and compelling and provide guidance to experimentalists on areas that need focus. Building on previous work, the performance-advantaged bioproducts and bioprocessing separations project (SepCon) continues to use the integrated TEA and LCA to evaluate and guide technologies under development and target challenges relevant to the industry and the Bioenergy Technologies Office (BETO) priority pathways. The analysis team aims to provide credible, unbiased assessments for each technology under development, with ongoing assessments to guide experimental teams. Additionally, the team also supports journal publications highlighting key findings.

biofuels↗

DOE OSTI2021

Separations Consortium: Counter Current Chromatography

In support of the Bioenergy Technologies Office in recovering coproducts in biorefineries this project evaluates the use of Counter Current Chromatography (CCC) in recovering co-products from Reductive Catalytic Fractionation (RCF) oil, Alkaline Pretreatment Liquor (APL), aqueous phase Hydrothermal Liquefaction (HTL) oil, and Catalytic Fast Pyrolysis (CFP) oil. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. CCC is a unique, scalable, chromatographic technology that operates with two immiscible liquid phases moving counter current to one another. Unlike Simulated Moving Bed (SMB) technology, CCC is a true moving bed and because it uses liquids as both the stationary and mobile phase it can handle solids directly in the feed. This aspect of CCC allows it to skip the expensive filtration step needed prior to traditional SMB, furthermore the liquid phases are composed on relatively inexpensive organics (e.g. hexane and ethyl acetate). This project develops CCC methods for direct isolation of co-products from RCF oil, APL, HTL aqueous, and CFP oil. TechnoEconomic Analysis and process modeling is presented to compare CCC to SMB and assess its applicability in a holistic biorefinery. Initial results indicate approximately 4x reductions in solvent demand and 2x reduction in energy consumption compared to SMB.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Separations Consortium: Lignin Rich Stream Fractionation and Purification

In support of the Bioenergy Technologies Office in converting lignin to fuels and chemicals, this project develops scalable separations based on membranes and Electordeionization (EDI) to recover low molecular weight (LMW) compounds from lignin rich streams. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. Specifically, membrane cascades using Tangential Flow Filtration (TFF) are investigated for the recovery of LMW lignin compounds from lignin rich streams such as Alkaline Pretreatment Liquor (APL), Reductive Catalytic Fractionation (RCF) oil, and Catalytic Oxidation oil. Process concepts, including dynamic filtration, are investigated to meet specific performance targets indicated by the consortium's Industrial Advisory Board for the membrane filtration including maintaining permeance > 1 LMH/bar and an overall cost target of < $1/kg of LMW lignin. EDI is investigated as an integral part of the membrane cascade to recover LMW aromatic acids and as an alternative to nanofiltration. Economic analysis of the processes is presented with a focus on minimizing energy consumption and capital expenditure. Furthermore, a sensitivity analysis is presented to identify key cost drivers and optimize holistic process operating conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

BETO 2021 Peer Review - Strategic Analysis Support WBS 4.1.1.30

Strategic Analysis Support. The objective of the NREL strategic support project is to provide sound, unbiased, and consistent analyses to inform the strategic direction of the DOE BETO office. This project addresses key technological questions, provides critical data needed to inform strategy, and highlights barriers, gaps and data needs in support of the DOE BETO's mission to improve the affordability of bio-based fuels and products. This task employs various quantitative (techno-economic analysis, TEA) and qualitative (gap analysis) approaches to allow for direct comparisons of biomass conversion technologies across a wide slate of processing platforms and products. Furthermore, this project develops and utilizes novel analyses beyond traditional biorefinery focused TEA/LCAs to identify both technical (e.g., in sustainable design) and non-technical (e.g., in value proposition) barriers, as well as to outline mitigation strategies and R&D needs for emerging technologies. Additionally, the project is tasked with evaluating drivers that support the growing bio-economy, which is achieved by the development and public release of tools to advance the understanding and facilitate comparisons of socio-economic impacts along the supply chain. Critical to the success of this project is the development of defensible methodologies, analyses, and tools that are publicly available to support stakeholders and bioeconomy growth. To develop such high-quality analyses, the biggest challenge to this project, as with most analysis focused projects, is the availability and reliability of the underlying data. Therefore, the project team works extensively with key stakeholders (e.g., policy makers, bioenergy technology developers, and investors) in developing and reviewing the results of these analyses to overcome this challenge. Any remaining uncertainties associated with the analysis efforts are clearly defined and quantified.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗