Engineering Papers⌕ Search

Engineering topics

Swissler, T. J.

Publications and source records attributed to Swissler, T. J..

28 records · Page 2

SAM II aerosol profile measurements, Poker Flat, Alaska; July 16-19, 1979

SAM II satellite measurements during the July 1979 Poker Flat mission, yielded an aerosol extinction coefficient of 0.0004/km at 1.0 micron wavelength, in the region of the stratospheric aerosol mixing ratio peak (12-16 km). The stratospheric aerosol optical depth for these data, calculated from the tropopause through 30 km, is approximately 0.001. These results are consistent with the average 1979 summertime values found throughout the Arctic.

Mccormick, M. P.↗

Satellite profile measurements of stratospheric ozone

A description is presented of preliminary results obtained in connection with the Stratospheric Aerosol and Gas Experiment (SAGE). SAGE, which uses a limb scanning solar radiometer, is an experiment aboard the Applications Explorer Mission 2 spacecraft which was launched on February 18, 1979. The instrument utilizes the technique of solar occultation to measure limb-path atmospheric extinction profiles which are inverted to yield vertical profiles of various atmospheric constituents in the latitude range from 79 deg South to 79 deg North. The ozone spectral channel is centered at 0.60 micrometers in the middle of the Chappuis absorption band. The general characteristics of the ozone profile measurements are shown in a graph. Each profile represents a day's average of approximately 15 measurements at the latitude band indicated. The SAGE ozone measurements are generating a highly detailed picture of the stratospheric ozone distribution.

Mccormick, M. P.↗

Analysis and interpretation of lidar observations of the stratospheric aerosol

Data obtained with a 48 in. telescope lidar system are compared with results obtained using a one-dimensional stratospheric aerosol model to analyze various microphysical processes influencing the formation of this aerosol. Special attention is given to the following problems: (1) how lidar data can help determine the composition of the aerosol particles and (2) how the layer corresponds to temperature profile variations. The lidar record during the period 1974 to 1979 shows a considerable decrease of the peak value of the backscatter ratio. Seasonal variations in the aerosol layer and a gradual decrease in stratospheric loading are observed. The aerosol model simulates a background stratospheric aerosol layer, and it predicts stratospheric aerosol concentrations and compositions. Numerical experiments are carried out by using the model and by comparing the theoretical results with the experimentally obtained lidar record. Comparisons show that the backscatter profile is consistent with the composition when the particles are sulfuric acid and water; it is not consistent with an ammonium sulfate composition. It is shown that the backscatter ratio is not sensitive to the composition or stratospheric loading of condensation nuclei such as meteoritic debris.

Hamill, P.↗

Methodology for error analysis and simulation of lidar aerosol measurements

A methodology is presented for objective and automated determination of the uncertainty in lidar aerosol measurements. This methodology is based on standard error-propagation procedures, a large data base on atmospheric behavior, and long experience in lidar data processing. Algebraic expressions for probable error are derived as a function of the relevant parameters. The validity of these expressions is then tested by making simulated measurements and analyses in which random errors of appropriate size are injected at proper steps of the measurement and analysis process. An illustrative example is given where the methodology is applied to a new lidar system now being used for airborne measurements of the stratospheric aerosol.

Russell, P. B.↗

Satellite studies of the stratospheric aerosol

The potential climatological and environmental importance of the stratospheric aerosol layer has prompted interest in measuring the properties of this aerosol. This paper reports on two recently deployed NASA satellite systems (SAM II and SAGE) that are monitoring the stratospheric aerosol. The satellite orbits obtain nearly global coverage. The instruments mounted in the spacecraft are sun photometers that measure solar intensity at specific wavelengths as it is moderated by atmospheric particulates and gases during each sunrise and sunset encountered by the satellites. Latitudinal, longitudinal, and temporal variations in the aerosol layer are evaluated. The satellite systems are being validated by a series of ground truth experiments using airborne and ground lidar, balloon-borne dustsondes, aircraft-mounted impactors, and other correlative sensors. The SAM II and SAGE satellite systems, instrument characteristics, and mode of operation are described; the methodology of the experiments is outlined; and the ground truth experiments are discussed. Preliminary results from these measurements are presented.

Mccormick, M. P.↗

Simulated lidar return from a one-dimensional stratospheric aerosol model

Results are presented for theoretical calculations of lidar backscatter at wavelengths of 0.6943 and 1.06 microns from the stratospheric aerosol. The computations are based on the size distribution, particle number density, and particle composition predicted by a one-dimensional model of the stratospheric aerosol layer that assumes that the primary source of sulfur to the stratosphere is biogenic OCS released at ground level. The aerosol particles are taken to be spherical liquid H2SO4-H2O solution droplets with solid cores, which undergo condensation, evaporation, coagulation, sedimentation, and vertical eddy mixing. The theoretical backscatter profiles are compared with experimental results obtained from actual lidar observations of the stratospheric aerosol layer before and after the eruption of Volcan de Fuego in October 1974. The model predictions are shown to be in good agreement with the average of a number of observations.

Hamill, P.↗

Post-volcanic stratospheric aerosol decay as measured by lidar

The paper summarizes and discusses results of lidar observations, at Hampton (Virginia), of the stratospheric aerosol vertical distribution for a period of 22 months (October 1974 to July 1976) after the volcanic eruption of the Volcan de Fuego in Guatemala. Data are presented in terms of lidar scattering ratio, vertically integrated aerosol backscattering, layer structure and location, and rawinsonde temperature profiles as a function of time. The results reveal a sudden increase in the stratospheric aerosol content after the volcanic eruption as well as its subsequent decline. There exists a high degree of correlation between the integrated aerosol backscattering and the tropopause height such that as one decreases the other increases and vice versa. Rapid decay of the stratospheric aerosol is found to occur over the late winter to early spring period.

Mccormick, M. P.↗

SAM-2 ground-truth plan: Correlative measurements for the Stratospheric Aerosol Measurement-2 (SAM 2) sensor on the Nimbus G satellite

The SAM-2 will fly aboard the Nimbus-G satellite for launch in the fall of 1978 and measure stratospheric vertical profiles of aerosol extinction in high latitude bands. The plan gives details of the location and times for the simultaneous satellite/correlative measurements for the nominal launch time, the rationale and choice of the correlative sensors, their characteristics and expected accuracies, and the conversion of their data to extinction profiles. The SAM-2 expected instrument performance and data inversion results are presented. Various atmospheric models representative of polar stratospheric aerosols are used in the SAM-2 and correlative sensor analyses.

Russell, P. B.↗

Some improvements in DNA interaction calculations

Calculations are made on specific DNA-type complexes using refined expressions for electrostatic and polarization energies. Dispersion and repulsive terms are included in the evaluation of the total interaction energy. It is shown that the expansion of the electrostatic potential to include multipole moments up to octopole is necessary to achieve convergence of first-order energies. Polarization energies are not as sensitive to this expansion. The calculations also support the usefulness of the hard sphere model for DNA hydrogen bonds and indicate how stacking interactions are influenced by second-order energies.

Egan, J. T.↗