Engineering Papers⌕ Search

Engineering topics

Swanson, R. C.

Publications and source records attributed to Swanson, R. C..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

An effective multigrid method for high-speed flows

The use is considered of a multigrid method with central differencing to solve the Navier-Stokes equations for high speed flows. The time dependent form of the equations is integrated with a Runge-Kutta scheme accelerated by local time stepping and variable coefficient implicit residual smoothing. Of particular importance are the details of the numerical dissipation formulation, especially the switch between the second and fourth difference terms. Solutions are given for 2-D laminar flow over a circular cylinder and a 15 deg compression ramp.

Swanson, R. C.↗
NASA NTRS1992

On central-difference and upwind schemes

A class of numerical dissipation models for central-difference schemes constructed with second- and fourth-difference terms is considered. The notion of matrix dissipation associated with upwind schemes is used to establish improved shock capturing capability for these models. In addition, conditions are given that guarantee that such dissipation models produce a Total Variation Diminishing (TVD) scheme. Appropriate switches for this type of model to ensure satisfaction of the TVD property are presented. Significant improvements in the accuracy of a central-difference scheme are demonstrated by computing both inviscid and viscous transonic airfoil flows.

Swanson, R. C.↗
NASA NTRS1992

Comparison Of Two Viscous-Flow Computer Codes

Two viscous-flow computer codes compared by applying them to five test cases of steady-state transonic viscous flows about transonic airfoils. Two codes were: FLOMG, which solves Navier-Stokes differential equations of flow by implementing explicit, Runge-Kutta, finite-volume, multigrid numerical-integration algorithm; and ARC2D, which implements implicit, finite-difference, approximate-factorization, eigenvector-diagonalization numerical-integration algorithm.

Maksymiuk, C. M.↗
NASA NTRS1991

Progress with multigrid schemes for hypersonic flow problems

Several multigrid schemes are considered for the numerical computation of viscous hypersonic flows. For each scheme, the basic solution algorithm uses upwind spatial discretization with explicit multistage time stepping. Two level versions of the various multigrid algorithms are applied to the two dimensional advection equation, and Fourier analysis is used to determine their damping properties. The capabilities of the multigrid methods are assessed by solving three different hypersonic flow problems. Some new multigrid schemes based on semicoarsening strategies are shown to be quite effective in relieving the stiffness caused by the high aspect ratio cells required to resolve high Reynolds number flows. These schemes exhibit good convergence rates for Reynolds numbers up to 200 x 10(exp 6) and Mach numbers up to 25.

Radespiel, R.↗
NASA NTRS1991

Multigrid for hypersonic viscous two- and three-dimensional flows

The use of a multigrid method with central differencing to solve the Navier-Stokes equations for hypersonic flows is considered. The time dependent form of the equations is integrated with an explicit Runge-Kutta scheme accelerated by local time stepping and implicit residual smoothing. Variable coefficients are developed for the implicit process that removes the diffusion limit on the time step, producing significant improvement in convergence. A numerical dissipation formulation that provides good shock capturing capability for hypersonic flows is presented. This formulation is shown to be a crucial aspect of the multigrid method. Solutions are given for two-dimensional viscous flow over a NACA 0012 airfoil and three-dimensional flow over a blunt biconic.

Turkel, E.↗
NASA NTRS1991

An effective multigrid method for high-speed flows

The use is considered of a multigrid method with central differencing to solve the Navier-Stokes equations for high speed flows. The time dependent form of the equations is integrated with a Runge-Kutta scheme accelerated by local time stepping and variable coefficient implicit residual smoothing. Of particular importance are the details of the numerical dissipation formulation, especially the switch between the second and fourth difference terms. Solutions are given for 2-D laminar flow over a circular cylinder and a 15 deg compression ramp.

Swanson, R. C.↗
NASA NTRS1991

A multiblock, multigrid solution procedure for multielement airfoils

A block-structured grid formulation is presented and discussed. The compressible Euler equations are solved on the decomposed domain with a multigrid method based on Runge-Kutta time stepping and centered spatial differencing. The flexibility of the multiblock approach is demonstrated by computing low speed inviscid flow over two different multielement airfoil configurations.

Sanetrik, Mark D.↗
NASA NTRS1991

Multigrid for hypersonic viscous two- and three-dimensional flows

The use of a multigrid method with central differencing to solve the Navier-Stokes equations for hypersonic flows is considered. The time-dependent form of the equations is integrated with an explicit Runge-Kutta scheme accelerated by local time stepping and implicit residual smoothing. Variable coefficients are developed for the implicit process that remove the diffusion limit on the time step, producing significant improvement in convergence. A numerical dissipation formulation that provides good shock-capturing capability for hypersonic flows is presented. This formulation is shown to be a crucial aspect of the multigrid method. Solutions are given for two-dimensional viscous flow over a NACA 0012 airfoil and three-dimensional viscous flow over a blunt biconic.

Turkel, E.↗
NASA NTRS1991

Inverse airfoil design procedure using a multigrid Navier-Stokes method

The Modified Garabedian McFadden (MGM) design procedure was incorporated into an existing 2-D multigrid Navier-Stokes airfoil analysis method. The resulting design method is an iterative procedure based on a residual correction algorithm and permits the automated design of airfoil sections with prescribed surface pressure distributions. The new design method, Multigrid Modified Garabedian McFadden (MG-MGM), is demonstrated for several different transonic pressure distributions obtained from both symmetric and cambered airfoil shapes. The airfoil profiles generated with the MG-MGM code are compared to the original configurations to assess the capabilities of the inverse design method.

Malone, J. B.↗
NASA NTRS1990

A comparison of two central difference schemes for solving the Navier-Stokes equations

Five viscous transonic airfoil cases were computed by two significantly different computational fluid dynamics codes: An explicit finite-volume algorithm with multigrid, and an implicit finite-difference approximate-factorization method with Eigenvector diagonalization. Both methods are described in detail, and their performance on the test cases is compared. The codes utilized the same grids, turbulence model, and computer to provide the truest test of the algorithms. The two approaches produce very similar results, which, for attached flows, also agree well with experimental results; however, the explicit code is considerably faster.

Maksymiuk, C. M.↗
NASA NTRS1990

On central-difference and upwind schemes

A class of numerical dissipation models for central-difference schemes constructed with second- and fourth-difference terms is considered. The notion of matrix dissipation associated with upwind schemes is used to establish improved shock capturing capability for these models. In addition, conditions are given that guarantee that such dissipation models produce a Total Variation Diminishing (TVD) scheme. Appropriate switches for this type of model to ensure satisfaction of the TVD property are presented. Significant improvements in the accuracy of a central-difference scheme are demonstrated by computing both inviscid and viscous transonic airfoil flows.

Swanson, R. C.↗
NASA NTRS1989

An investigation of cell centered and cell vertex multigrid schemes for the Navier-Stokes equations

Two efficient and robust finite-volume multigrid schemes for solving the Navier-Stokes equations are investigated. These schemes employ either a cell centered or a cell vertex discretization technique. An explicit Runge-Kutta algorithm is used to advance the solution in time. Acceleration techniques are applied to obtain faster steady-state convergence. Accuracy and convergence of the schemes are examined. Computational results for transonic airfoil flows are essentially the same, even for a coarse mesh. Both schemes exhibit good convergence rates for a broad range of artificial dissipation coefficients.

Radespiel, R.↗
NASA NTRS1989

An efficient cell-vertex multigrid scheme for the three-dimensional Navier-Stokes equations

A cell-vertex scheme for the three-dimensional Navier-Stokes equations, which is based on central difference approximations and Runge-Kutta time stepping, is described. Using local time stepping, implicit residual smoothing with locally varying coefficients, a multigrid method and carefully controlled dissipative terms, very good convergence rates are obtained for two- and three-dimensional flows. Details of the acceleration techniques, which are important for convergence on meshes with high aspect-ratio cells, are discussed. Emphasis is put on the analysis of the stability properties of the implicit smoothing of the explicit residuals with coefficients, which depend on cell aspect ratios.

Radespiel, R.↗
NASA NTRS1988

A Navier-Stokes solver for cascade flows

A computer code for solving the Reynolds averaged full Navier-Stokes equations has been developed and applied using sheared H-type grids. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. The integration in time is based on an explicit four-stage Runge-Kutta scheme. Local time stepping, variable coefficient implicit residual smoothing, and a full multigrid method have been implemented to accelerate steady state calculations. Comparisons with experimental data show that the code is an accurate viscous solver and can give very good blade-to-blade predictions for engineering applications in less than 100 multigrid cycles on the finest mesh.

Arnone, A.↗
NASA NTRS1987

Artificial dissipation and central difference schemes for the Euler and Navier-Stokes equations

An artificial dissipation model, including boundary treatment, that is employed in many central difference schemes for solving the Euler and Navier-Stokes equations is discussed. Modifications of this model such as the eigenvalue scaling suggested by upwind differencing are examined. Multistage time stepping schemes with and without a multigrid method are used to investigate the effects of changes in the dissipation model on accuracy and convergence. Improved accuracy for inviscid and viscous airfoil flow is obtained with the modified eigenvalue scaling. Slower convergence rates are experienced with the multigrid method using such scaling. The rate of convergence is improved by applying a dissipation scaling function that depends on mesh cell aspect ratio.

Swanson, R. C.↗
NASA NTRS1987

Artificial dissipation and central difference schemes for the Euler and Navier-Stokes equations

An artificial dissipation model, including boundary treatment, that is employed in many central difference schemes for solving the Euler and Navier-Stokes equations is discussed. Modifications of this model such as the eigenvalue scaling suggested by upwind differencing are examined.Multistage time stepping schemes with and without a multigrid method are used to investigate the effects of changes in the dissipation model on accuracy and convergence. Improved accuracy for inviscid and viscous airfoil flows is obtained with the modified eigenvalue scaling. Slower convergence rates are experienced with the multigrid method using such scaling. The rate of convergence is improved by applying a dissipation scaling function that depends on mesh cell aspect ratio.

Swanson, R. C.↗