Engineering Papers⌕ Search

Engineering topics

Suzuki, K.

Publications and source records attributed to Suzuki, K..

The imaging Time-of-Propagation detector at Belle II

Here, we report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB e + e - collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (quartz) and transported to the ends of the bars via total internal reflection. One bar end is instrumented with finely segmented micro-channel-plate photomultiplier tubes to record the light, while the other end has a mirror attached to reflect the photons back to the instrumented end. Both the propagation times and hit positions of the Cherenkov photons are measured; these depend on the Cherenkov angle and together provide good discrimination among charged pions, kaons, and protons with momenta up to around 4 GeV/ c . To date, the detector has been used to record and analyze almost 600 fb −1 of Belle II data.

43 PARTICLE ACCELERATORS↗

Hydrogen Cyanide in the Upper Troposphere: GEM-AQ Simulation and Comparison with ACE-FTS Observations

We investigate the spatial and temporal distribution of hydrogen cyanide (HCN) in the upper troposphere through numerical simulations and comparison with observations from a space-based instrument. To perform the simulations, we used the Global Environmental Multiscale Air Quality model (GEM-AQ), which is based on the threedimensional Gobal multiscale model developed by the Meteorological Service of Canada for operational weather forecasting. The model was run for the period 2004-2006 on a 1.5deg x 1.5deg global grid with 28 hybrid vertical levels from the surface up to 10 hPa. Objective analysis data from the Canadian Meteorological Centre were used to update the meteorological fields every 24 h. Fire emission fluxes of gas species were generated by using year-specific inventories of carbon emissions with 8-day temporal resolution from the Global Fire Emission Database (GFED) version 2. The model output is compared with HCN profiles measured by the Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS) instrument onboard the Canadian SCISAT-1 satellite. High values of up to a few ppbv are observed in the tropics in the Southern Hemisphere; the enhancement in HCN volume mixing ratios in the upper troposphere is most prominent in October. Low upper-tropospheric mixing ratios of less than 100 pptv are mostly recorded at middle and high latitudes in the Southern Hemisphere in May-July. Mixing ratios in Northern Hemisphere peak in the boreal summer. The amplitude of the seasonal variation is less pronounced than in the Southern Hemisphere. The comparison with the satellite data shows that in the upper troposphere GEM-AQ perform7s well globally for all seasons, except at northern hi gh and middle latitudes in surnmer, where the model has a large negative bias, and in the tropics in winter and spring, where it exhibits large positive bias. This may reflect inaccurate emissions or possible inaccuracies in the emission profile. The model is able to explain most of the observed variability in the upper troposphere HCN field, includin g the interannual variations in the observed mixing ratio. A complementary comparison with daily total columns of HCN from two middle latitude ground-based stations in Northern Japan for the same simulation period shows that the model captures the observed seasonal variation and also points to an underestimation of model emissions in the Northern Hemisphere in the summer. The estimated average global emission equals 1.3 Tg N/yr. The average atmospheric burden is 0.53 Tg N, and the corresponding lifetime is 4.9 months.

Lupu, A.↗

Silicon carbide sintered products and a method for their manufacturing

SiC based sinters are produced by pressureless sintering from a SiC-AlN solid solution containing Al2 to 20, N 0.2 to 10, O 0.2 to 5, a Group IIIB element 0 to 15 percent, the remainder being Si and C. Thus, a 90:10 mixture of SiC and AlN powders were cold pressed at 2000 kg/sq cm and sintered for 5 hours at 2100 C in a nitrogen atmosphere. The resulting product had density of 3.11 g/cu cm and bending strength at ambient and 1400 C at 68.5 and 66.3 kg/sq mm.

Suzuki, K.↗

Observation of total ozone fields in the Antarctic atmosphere from TOVS of TIROS-N/NOAA

Total ozone amounts in the Antarctic atmosphere are derived from infrared nadir scanning data of TIROS Operational Vertical Sounder (TOVS) of NOAA-6 and 7. HRPT data of the TIROS-N NOAA series of meteorological satellites have been received at Syowa Station (69 deg 00'S, 39 deg 35'E), Antarctica, about once a day since February 1980, by the Japanese Antarctic Research Expedition. HIRS/2 data of TOVS were extracted from HRPT data after being converted into CCT at the home institute. Total ozone amounts were derived for the northeastern part of the Antarctic, for about 100 orbits in 1981 and 1982.

Yamanouchi, T.↗

Ammonia formation caused by the presence of water in the wet grinding of silicon nitride powder

Si3 N4 powder (amorphous, alpha-, and beta-Si3 N4) was mixed with MeOH containing 8.87 mol. % H2O and ground. The NH3 generation rapidly increased after a grinding time of 100 hours. Silicon nitride sintered material was chosen as one of the high temperature, high strength structural materials and studies of the control of the raw material powder, preparation of the sintered body (finding the right assistant, hot press, high pressure sintering, fracture toughness and oxidation at high temperature were performed.

Kanno, Y.↗

Silicon carbide material sintered bodies manufacturing

A method is described for producing a high density silicon carbide sintering substance which contains aluminum oxide. The sintering is done in CO gas atmosphere, which is kept at 2 to 20 atmospheric pressures.

Suzuki, K.↗

Silicon nitride sintered body

The sintering of silicon carbide and it production are described. The method of production is by calcination in which molding is followed by sintering without compression. The invention improves the composition of the silicon carbide ceramic. Six examples of the invention are illustrated and discussed.

Suzuki, K.↗

Silicon carbide ceramic production

A method to produce sintered silicon carbide ceramics in which powdery carbonaceous components with a dispersant are mixed with silicon carbide powder, shaped as required with or without drying, and fired in nonoxidation atmosphere is described. Carbon black is used as the carbonaceous component.

Suzuki, K.↗

Pioneer 10 ultraviolet photometer observations of the interplanetary glow at heliocentric distances from 2 to 14 AU

An analysis is presented of the observed Pioneer 10 interplanetary data from 1972 to 1977, taking into account the interplanetary glow intensity observed by the Pioneer 10 UV photometer at sun-spacecraft distances of 2-14 AU. On the basis of the obtained data, it was determined that the background intensity for the 200-1400 A band pass of the photometer channel is about 40 + or - 10 R, and that the nearby interstellar density is 0.04 + or - 0.91 per ccm for hydrogen and about 0.01 + or - 0.002 per ccm for helium. Accordingly, the He/H number density is about 0.25 at large distances from the sun. The Pioneer 10 spacecraft is leaving the solar system in the downwind direction, while both Pioneer 11 and Voyager will leave in the upwind direction. The combined UV observations of the interplanetary glow will provide accurate results on the physical status of the inflowing interstellar gas and the variability of background radiation as well.

Wu, F. M.↗