Suppanz, M. J. | Engineering Papers

NASA NTRS1980

Space Shuttle Orbiter nose cap and wing leading edge certification test program

A reinforced carbon-carbon thermal protection system is used on the space shuttle orbiter vehicle's nose cap and wing leading edge regions where temperatures reach 1538 C (2800 F). To verify the analyses used to certify reinforced carbon-carbon for the first flight and operational missions, a multi-environment incremental test program was developed and implemented through the combined efforts of Rockwell International and the National Aeronautics and Space Administration. Three separate facilities at the Johnson Space Center were used to subject full-scale nose cap and wing leading edge test articles to simulated critical launch, on-orbit, and atmospheric entry environments.

Suppanz, M. J.↗

NASA NTRS1972

Space shuttle orbiter windshield system design and test

The development and testing of primary structural elements that are necessary to design a windshield system for the space shuttle orbiter are summarized. The elements include the outer (heat shield) panes, the inner pressure panes, the seals for both panes, and components of both window frames. One test article representing a pressure pane, including frames and seals, was tested under two sets of conditions. One set represented 100 mission cycles with temperature and pressure typical of those exerted on the innermost pane of the three-pane window system, and the second set represented 100 mission cycles with temperature and pressure typical of those exerted on a middle pane. A second test article representing an outer (heat sheild) pane was tested to conditions of 120 entry cycles, which equates to 100 entry cycles plus sufficient fatigue on the pane to account for 100 boost cycles. All elements of the design survived the test conditions in good condition. Window system for the shuttle orbiter vehicle.

Hayashida, K.↗