Engineering Papers⌕ Search

Engineering topics

Suo, Zhigang

Publications and source records attributed to Suo, Zhigang.

Flexible robotic actuators

Systems and methods for providing flexible robotic actuators are disclosed. Some embodiments of the disclosed subject matter include a soft robot capable of providing a radial deflection motions; a soft tentacle actuator capable of providing a variety of motions and providing transportation means for various types of materials; and a hybrid robotic system that retains desirable characteristics of both soft robots and hard robots. Some embodiments of the disclosed subject matter also include methods for operating the disclosed robotic systems.

Morin, Stephen A.↗

Stretchable ionics for transparent sensors and actuators

A class of devices enabled by ionic conductors is highly stretchable, fully transparent to light of all colors, biocompatible or biodegradable, and capable of operation at frequencies beyond 10 kilohertz and voltages above 10 kilovolts. These devices enabled by ionic conductors can be used as large strain actuators, full-range loudspeakers, as strain or pressure sensors and as stretchable interconnects. The electromechanical transduction is achieved without electrochemical reaction. When large stretchability and high optical transmittance are required, the ionic conductors have lower sheet resistance than all existing electronic conductors.

Sun, Jeong Yun↗

Digital logic for soft devices

Although soft devices (grippers, actuators, and elementary robots) are rapidly becoming an integral part of the broad field of robotics, autonomy for completely soft devices has only begun to be developed. Adaptation of conventional systems of control to soft devices requires hard valves and electronic controls. This paper describes completely soft pneumatic digital logic gates having a physical scale appropriate for use with current (macroscopic) soft actuators. Each digital logic gate utilizes a single bistable valve—the pneumatic equivalent of a Schmitt trigger—which relies on the snap-through instability of a hemispherical membrane to kink internal tubes and operates with binary high/low input and output pressures. Soft, pneumatic NOT, AND, and OR digital logic gates—which generate known pneumatic outputs as a function of one, or multiple, pneumatic inputs—allow fabrication of digital logic circuits for a set–reset latch, two-bit shift register, leading-edge detector, digital-to-analog converter (DAC), and toggle switch. The DAC and toggle switch, in turn, can control and power a soft actuator (demonstrated using a pneu-net gripper). We note ehese macroscale soft digital logic gates are scalable to high volumes of airflow, do not consume power at steady state, and can be reconfigured to achieve multiple functionalities from a single design (including configurations that receive inputs from the environment and from human users). This work represents a step toward a strategy to develop autonomous control—one not involving an electronic interface or hard components—for soft devices.

36 MATERIALS SCIENCE↗

Flexible robotic actuators

Systems and methods for providing flexible robotic actuators are disclosed. Some embodiments of the disclosed subject matter include a soft robot capable of providing a radial deflection motions; a soft tentacle actuator capable of providing a variety of motions and providing transportation means for various types of materials; and a hybrid robotic system that retains desirable characteristics of both soft robots and hard robots. Some embodiments of the disclosed subject matter also include methods for operating the disclosed robotic systems.

42 ENGINEERING↗

Buckling Pneumatic Linear Actuators Inspired by Muscle

To being, the mechanical features of biological muscles are difficult to reproduce completely in synthetic systems. A new class of soft pneumatic structures (vacuum-actuated muscle-inspired pneumatic structures) is described that combines actuation by negative pressure (vacuum), with cooperative buckling of beams fabricated in a slab of elastomer, to achieve motion and demonstrate many features that are similar to that of mammalian muscle.

36 MATERIALS SCIENCE↗

Fatigue-free, superstretchable, transparent, and biocompatible metal electrodes

Significance Fatigue is a deadly disease for metals. Fatigue often happens under cyclic loading even if the strain level is low. However, a stretchable transparent electrode, which can be made of metal and is a key element in stretchable electronics, needs high stability at large strains. Here we show that Au nanomesh on a slippery substrate is fatigue-free when cyclically stretched to large strains (>100%). Moreover, cells can grow on the Au nanomesh. A metal mesh that conducts electricity, is biocompatible, and is completely free of fatigue will be an ideal electrode not only for flexible electronics, but also for implantable electronics.

Guo, Chuan Fei↗

Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Islands stretch test for measuring the interfacial fracture energy between a hard film and a soft substrate

We present a technique for measuring the interfacial fracture energy, {Gamma}{sub i}, between a hard thin film and a soft substrate. A periodic array of hard thin islands is fabricated on a soft substrate, which is then subjected to uniaxial tension under an optical microscope. When the applied strain reaches a critical value, delamination between the islands and the substrate starts from the edge of the islands. As the strain is increased, the interfacial cracks grow in a stable fashion. At a given applied strain, the width of the delaminated region is a unique function of the interfacial fracture energy. We have calculated the energy release rate driving the delamination as a function of delamination width, island size, island thickness, and applied strain. For a given materials system, this relationship allows determination of the interfacial fracture energy from a measurement of the delamination width. The technique is demonstrated by measuring the interfacial fracture energy of plasma-enhanced chemical vapor deposition SiN{sub x} islands on a polyimide substrate. We anticipate that this technique will find application in the flexible electronics industry where hard islands on soft substrates are a common architecture to protect active devices from fracture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Templated Self Assemble of Nano-Structures

This project will identify and model mechanisms that template the self-assembly of nanostructures. We focus on a class of systems involving a two-phase monolayer of molecules adsorbed on a solid surface. At a suitably elevated temperature, the molecules diffuse on the surface to reduce the combined free energy of mixing, phase boundary, elastic field, and electrostatic field. With no template, the phases may form a pattern of stripes or disks. The feature size is on the order of 1-100 nm, selected to compromise the phase boundary energy and the long-range elastic or electrostatic interaction. Both experimental observations and our theoretical simulations have shown that the pattern resembles a periodic lattice, but has abundant imperfections. To form a perfect periodic pattern, or a designed aperiodic pattern, one must introduce a template to guide the assembly. For example, a coarse-scale pattern, lithographically defined on the substrate, will guide the assembly of the nanoscale pattern. As another example, if the molecules on the substrate surface carry strong electric dipoles, a charged object, placed in the space above the monolayer, will guide the assembly of the molecular dipoles. In particular, the charged object can be a mask with a designed nanoscale topographic pattern. A serial process (e.g., e-beam lithography) is necessary to make the mask, but the pattern transfer to the molecules on the substrate is a parallel process. The technique is potentially a high throughput, low cost process to pattern a monolayer. The monolayer pattern itself may serve as a template to fabricate a functional structure. This project will model fundamental aspects of these processes, including thermodynamics and kinetics of self-assembly, templated self-assembly, and self-assembly on unconventional substrates. It is envisioned that the theory will not only explain the available experimental observations, but also motivate new experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗