Engineering topics
Sun, Zaicheng
Publications and source records attributed to Sun, Zaicheng.
Synthesis of Carbon Dots with Multiple Color Emission by Controlled Graphitization and Surface Functionalization
Multiple-color-emissive carbon dots (CDots) have potential applications in various fields such as bioimaging, light-emitting devices, and photocatalysis. The majority of the current CDots to date exhibit excitation-wavelength-dependent emissions with their maximum emission limited at the blue-light region. In this paper, a synthesis of multiple-color-emission CDots by controlled graphitization and surface function is reported. The CDots are synthesized through controlled thermal pyrolysis of citric acid and urea. By regulating the thermal-pyrolysis temperature and ratio of reactants, the maximum emission of the resulting CDots gradually shifts from blue to red light, covering the entire light spectrum. Specifically, the emission position of the CDots can be tuned from 430 to 630 nm through controlling the extent of graphitization and the amount of surface functional groups, –COOH. The relative photoluminescence quantum yields of the CDots with blue, green, and red emission reach up to 52.6%, 35.1%, and 12.9%, respectively. Furthermore, it is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices. Finally, this research opens a door for developing low-cost CDots as alternative phosphors for light-emitting devices.
Operando chemistry of catalyst surfaces during catalysis
The chemistry of a catalyst surface during catalysis is crucial for a fundamental understanding of the mechanisms of a catalytic reaction performed on the catalyst in the gas or liquid phase.
Preparation of highly luminescent and color tunable carbon nanodots under visible light excitation for in vitro and in vivo bio-imaging
Carbon nanodots (CDs) have generated enormous excitement because of their superiority in water solubility, chemical inertness, low toxicity, ease of functionalization and resistance to photobleaching. Here we report a facile thermal pyrolysis route to prepare CDs with high quantum yield (QY) using citric acid as the carbon source and ethylene diamine derivatives (EDAs) including triethylenetetramine (TETA), tetraethylenepentamine (TEPA) and polyene polyamine (PEPA) as the passivation agents. We find that the CDs prepared from EDAs, such as TETA, TEPA and PEPA, show relatively high photoluminescence (PL) QY (11.4, 10.6, and 9.8%, respectively) at 1 ex of 465 nm. The cytotoxicity of the CDs has been investigated through in vitro and in vivo bio-imaging studies. The results indicate that these CDs possess low toxicity and good biocompatibility. As a result, the unique properties such as the high PL QY at large excitation wave length and the low toxicity of the resulting CDs make them promising fluorescent nanoprobes for applications in optical bio-imaging and biosensing.
Bandgap engineering of Magnéli phase Ti{sub n}O{sub 2n−1}: Electron-hole self-compensation
An electron-hole self-compensation effect is revealed and confirmed in nitrogen doped Magnéli phase Ti{sub n}O{sub 2n−1} (n = 7, 8, and 9) by using hybrid density functional theory calculations. We found that the self-compensation effect between the free electrons in Magnéli phase Ti{sub n}O{sub 2n−1} (n = 7, 8, and 9) and the holes induced by p-type nitrogen doping could not only prevent the recombination of photo-generated electron-hole pairs, but also lead to an effective bandgap reduction. This novel electron-hole self-compensation effect may provide a new approach for bandgap engineering of Magnéli phase metal suboxides.
Formation mechanism and optimization of highly luminescent N-doped graphene quantum dots
Photoluminescent graphene quantum dots (GQDs) have received enormous attention because of their unique chemical, electronic and optical properties. Here a series of GQDs were synthesized under hydrothermal processes in order to investigate the formation process and optical properties of N-doped GQDs. Citric acid (CA) was used as a carbon precursor and self-assembled into sheet structure in a basic condition and formed N-free GQD graphite framework through intermolecular dehydrolysis reaction. N-doped GQDs were prepared using a series of N-containing bases such as urea. Detailed structural and property studies demonstrated the formation mechanism of N-doped GQDs for tunable optical emissions. Hydrothermal conditions promote formation of amide between –NH2 and –COOH with the presence of amine in the reaction. The intramoleculur dehydrolysis between neighbour amide and COOH groups led to formation of pyrrolic N in the graphene framework. Further, the pyrrolic N transformed to graphite N under hydrothermal conditions. N-doping results in a great improvement of PL quantum yield (QY) of GQDs. By optimized reaction conditions, the highest PL QY (94%) of N-doped GQDs was obtained using CA as a carbon source and ethylene diamine as a N source. The obtained N-doped GQDs exhibit an excitation-independent blue emission with single exponential lifetime decay.
Solution based nanoengineering of multifunctional coatings through self assembly techniques.
Abstract not provided.
Solution based nanoengineering of multifunctional coatings through self assembly techniques.
Abstract not provided.
Method for making nanoporous hydrophobic coatings
A simple coating method is used to form nanoporous hydrophobic films that can be used as optical coatings. The method uses evaporation-induced self-assembly of materials. The coating method starts with a homogeneous solution comprising a hydrophobic polymer and a surfactant polymer in a selective solvent. The solution is coated onto a substrate. The surfactant polymer forms micelles with the hydrophobic polymer residing in the particle core when the coating is dried. The surfactant polymer can be dissolved and selectively removed from the separated phases by washing with a polar solvent to form the nanoporous hydrophobic film.
Method of making monodisperse nanoparticles
A method of making particles of either spherical or cylindrical geometry with a characteristic diameter less than 50 nanometers by mixing at least one structure directing agent dissolved in a solvent with at least one amphiphilic block copolymer dissolved in a solvent to make a solution containing particles, where the particles can be subsequently separated and dispersed in a solvent of choice.
Scalable assembly of patterned ordered functional micelle arrays: final LDRD report
In this project, we demonstrated the synthesis of polystyrene-polyvinylpyridyne (PS-PVP) micelles, functionalization of these micelles to form organic/inorganic composite nanoparticles, and template directed assembly of dynamic PS-PVP micelles into features defined via soft nanoimprint lithography. We demonstrated unique assembly properties of dynamic micellar nanoparticles by combining a top down lithographic nanopatterning technique with a solution based bottom up self-assembly.
Smart Polydiacetylene Nanowire Paper with Tunable Colorimetric Responses.
Abstract not provided.
Monodisperse Fluorescent Organic/Inorganic Composite Nanoparticles: Tuning Full Color Spectrum.
Abstract not provided.
Templated photocatalytic synthesis of well-defined Pt hollow nanostructures with enhanced catalytic performance for methanol oxidation.
Abstract not provided.
Cooperative Assembly and Formation of Nanostructured Particle Arrays.
Abstract not provided.
Uniform Nanoparticles Formed by Hydrogen Bond Assisted Polymer Micelles.
Abstract not provided.