Engineering Papers⌕ Search

Engineering topics

Sun, Y

Publications and source records attributed to Sun, Y.

At least 91 records · Page 5

Shape evolution of the highly deformed {sup 75}Kr nucleus examined with the Doppler-shift attenuation method

High-spin states of the {sup 75}Kr nucleus have been populated via the {sup 50}Cr({sup 28}Si,2pn){sup 75}Kr reaction at an incident beam energy of 90 MeV. Lifetimes of nine states up to spin I=33/2 for the positive-parity band and seven states up to I=27/2 for the negative-parity band have been measured using the Doppler-shift attenuation method. The deduced transition quadrupole moments Q{sub t} of these bands have been compared to the projected shell-model calculations to gain insight into the evolution of collectivity for the two experimentally studied bands in {sup 75}Kr.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beam dynamics aspects of crab cavities in the CERN Large Hadron Collider

Modern colliders bring into collision a large number of bunches to achieve a high luminosity. The long-range beam-beam effects arising from parasitic encounters at such colliders are mitigated by introducing a crossing angle. Under these conditions, crab cavities (CC) can be used to restore effective head-on collisions and thereby to increase the geometric luminosity. Such crab cavities have been proposed for both linear and circular colliders. The crab cavities are rf cavities operated in a transverse dipole mode, which imparts on the beam particles a transverse kick that varies with the longitudinal position along the bunch. The use of crab cavities in the Large Hadron Collider (LHC) may not only raise the luminosity, but it could also complicate the beam dynamics, e.g., crab cavities might not only cancel synchrobetatron resonances excited by the crossing angle but they could also excite new ones, they could reduce the dynamic aperture for off-momentum particles, they could influence the aperture and orbit, also degrade the collimation cleaning efficiency, and so on. In this paper, we explore the principal feasibility of LHC crab cavities from a beam dynamics point of view. The implications of the crab cavities for the LHC optics, analytical and numerical luminosity studies, dynamic aperture, aperture and beta beating, emittance growth, beam-beam tune shift, long-range collisions, and synchrobetatron resonances, crab dispersion, and collimation efficiency will be discussed.

43 PARTICLE ACCELERATORS↗

Thermoelectric transport properties of highly oriented FeSb{sub 2} thin films

Highly textured FeSb{sub 2} films were produced on quartz wafers by a sputtering method. Their resistivity and Seebeck coefficient (S) were measured and a maximum absolute value of Sapprox160 muV K{sup -1} at 50 K was obtained. Hall measurements were employed to study the charge carrier concentrations and Hall mobilities of the FeSb{sub 2} films. By comparing with the transport properties of FeSb{sub 2} single crystals and an extrinsically doped FeSb{sub 1.98}Te{sub 0.02} single crystal, the thermoelectric properties of the FeSb{sub 2} films are demonstrated to be dominated by the intrinsic properties of FeSb{sub 2} at a high charge carrier concentration.

36 MATERIALS SCIENCE↗

Perspectives of a mid-rapidity dimuon program at the RHIC: a novel and compact muon telescope detector

We propose a large-area, cost-effective Muon Telescope Detector (MTD) at mid-rapidity for the Solenoidal Tracker at RHIC (STAR) and for the next generation of detectors at a possible electron-ion collider. We utilize large Multi-gap Resistive Plate Chambers with long readout strips (long-MRPC) in the detector design. The results from cosmic ray and beam tests show the intrinsic timing and spatial resolution for a long-MRPC are 60-70 ps and {approx} 1 cm, respectively. The performance of the prototype muon telescope detector at STAR indicates that muon identification at a transverse momentum of a few GeV/c can be achieved by combining information from track matching with the MTD, ionization energy loss in the Time Projection Chamber, and time-of-flight measurements. A primary muon over secondary muon ratio of better than 1/3 can be achieved. This provides a promising device for future quarkonium programs and primordial dilepton measurements at RHIC. Simulations of the muon efficiency, the signal-to-background ratio of J/{psi}, the separation of {Upsilon} 1S from 2S+3S states, and the electron-muon correlation from charm pair production in the RHIC environment are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The metal-insulator transition in vanadium dioxide: A view at bulk and surface contributions for thin films and the effect of annealing

Vanadium dioxide is investigated as potential oxide barrier in spin switches, and in order to incorporate VO{sub 2} layers in complex multilayer devices, it is necessary to understand the relation between bulk and surface/interface properties. Highly oriented VO{sub 2} thin films were grown on (0001) sapphire single crystal substrates with reactive bias target ion beam deposition. In the analysis of the VO{sub 2} films, bulk-sensitive methods [x-ray diffraction (XRD) and transport measurements] and surface sensitive techniques [photoelectron spectroscopy (PES) and scanning tunneling microscopy and spectroscopy] were employed. The samples were subjected to heating cycles with annealing temperatures of up to 425 and 525 K. Prior to annealing the VO{sub 2} films exhibit the transition from the monoclinic to the tetragonal phase with the concurrent change in conductivity by more than a factor of 10{sup 3} and their phase purity is confirmed by XRD. Annealing to 425 K and thus cycling across the metal-insulator transition (MIT) temperature has no impact on the bulk properties of the VO{sub 2} film but the surface undergoes irreversible electronic changes. The observation of the valence band with PES during the annealing illustrates that the surface adopts a partially metallic character, which is retained after cooling. Annealing to a higher temperature (525 K) triggers a modification of the bulk, which is evidenced by a considerable reduction in the MIT characteristics, and a degradation in crystallite morphology. The local measurement of the conductivity with scanning tunneling spectroscopy shows the transition of the surface from predominantly semiconducting surface prior to annealing to a surface with an overwhelming contribution from metallic sections afterward. The spatial distribution of metallic regions cannot be linked in a unique manner to the crystallite size or location within the crystallites. The onset of oxygen depletion at the surface is held responsible for this behavior. The onset of bulk modification at higher temperatures is most likely linked to oxygen loss and effusion along the grain boundaries and concurrent onset of sintering. Our study focuses on the comparison of the MIT in the bulk and at the surface of thin VO{sub 2} layers and establishes an irreversible modification of the crystallite structure and surface for temperatures exceeding the MIT. The surface modification impacts on the strategies which will be employed to build the metallic contacts to VO{sub 2} layers.

36 MATERIALS SCIENCE↗

Evaluation of Electron Energy Spread in CsBr Based Photocathodes

Photocathodes with relatively low energy spread (<0.5 eV) are required for electron sources in several applications including single and multiple electron beam inspection and lithography tools and free electron lasers. CsBr based photocathodes have been shown to be very robust and capable of operation at high current density (>150 A/cm{sup 2}) with very long lifetime (approximately hundreds of hours/spot). Experimental results of the photoelectron energy spread obtained in CsBr films deposited on both metal and InGaN substrates will be presented in this paper.

36 MATERIALS SCIENCE↗

Status of LHC crab activity simulations and beam studies

The LHC crab cavity program is advancing rapidly towards a first prototype which is anticipated to be tested during the early stages of the LHC phase I upgrade and commissioning. The general project status and some aspects related to crab optics, collimation, aperture constraints, impedances, noise effects. beam transparency and machine protection critical for a safe and robust operation of LHC beams with crab cavities are addressed here.

43 PARTICLE ACCELERATORS↗

CsBr/GaN Heterojunction Photoelectron Source

Experimental results on a new CsBr/GaN heterojunction photocathode structure are presented. The results indicate a fourfold improvement in photoyield relative to CsBr/Cr photocathodes. A model is presented based on intraband states in CsBr and electron injection from the GaN (with 1% addition of indium) substrate to explain the observed photoyield enhancement. The photocathode lifetime at high current density (>40 A/cm{sup 2}) is limited by laser heating of the small illuminated area. Calculations are presented for sapphire and diamond substrates, indicating a factor of 20 reduction in temperature for the latter. The results are encouraging for the realization of a high photoyield photocathode operating at high current density with long lifetime.

36 MATERIALS SCIENCE↗

Laser-driven growth of silver nanoplates on p-Type GaAs substrates and their surface-enhanced raman scattering activity.

Contact between aqueous solutions of silver nitrate (AgNO{sub 3}) and pristine surfaces of p-type gallium arsenide (GaAs) wafers results in essentially no reaction at room temperature and in the dark. The galvanic reactions between the GaAs wafers and AgNO{sub 3} can be triggered under illumination of laser beams with power densities higher than a critical value ({approx}15 mW/cm{sup 2} for a 630 nm laser), resulting in the growth of silver (Ag) nanoplates on the GaAs surface. The density and dimensions (including both thickness and edge length) of the resulting nanoplates can be readily tuned by controlling the growth time and laser power density. The as-grown Ag nanoplates on the substrates significantly enhance Raman signals of interesting molecules and serve as a new class of promising surface-enhanced Raman scattering substrates for sensitive chemical detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Collectivity in the {sup 94}Ag isomeric states

We study the structure of isomeric state 21{sup +} in the odd-odd N = Z nucleus {sup 94}Ag using a shell model, which is capable of describing the spectra of upper g9/2-shell nuclei close to the N = Z line. It is shown that the 21{sup +} state becomes isomeric because of level inversion of the 19{sup +} and 21{sup +} states due to core excitations across the N = Z = 50 shell gap. Calculation of spectroscopic quadrupole moment indicates clearly an enhancement in these states due to the core excitations. In the present shell model calculation, however, the large-deformation picture of Mukha et al. in Nature 439, 298 (2006) cannot be accepted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Collective structure in neutron-rich Cr nuclei around N = 40

The microscopic structure of the neutron-rich Cr nuclei around N = 40 is investigated using spherical shell-model calculations. The calculations reproduce well the known energy levels for Cr nuclei, and predict the collectivity around neutron number N = 40. The calculated B(E2;2{sub 1}{sup +}{yields}0{sub 1}{sup +}) systematics show the strong collectivity around N = 40. The sudden drop of the 9/2{sub 1}{sup +} from {sup 55}Cr to {sup 59}Cr and the low-lying 0{sub 2}{sup +} states around N = 40 are discussed. We predict a new band built on the 0{sub 2}{sup +} state in {sup 64}Cr with N = 40.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthesis of out-of-substrate Au-Ag nanoplates with enhanced stability for catalysis.

Gold-silver alloy nanoplates with out-of-substrate orientation are synthesized on large-area supports by growth of silver nanoplates on gallium arsenide wafers followed by an overgrowth and alloying process. The surfaces of the nanoplates are highly exposed to the surrounding environment, thus increasing their catalytic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of epitaxial graphene formation on SiC(0001).

The formation of epitaxial graphene on SiC(0001) surfaces is studied using atomic force microscopy, Auger electron spectroscopy, electron diffraction, Raman spectroscopy, and electrical measurements. Starting from hydrogen-annealed surfaces, graphene formation by vacuum annealing is observed to begin at about 1150 C, with the overall step-terrace arrangement of the surface being preserved but with significant roughness (pit formation) on the terraces. At higher temperatures near 1250 C, the step morphology changes, with the terraces becoming more compact. At 1350 C and above, the surface morphology changes into relatively large flat terraces separated by step bunches. Features believed to arise from grain boundaries in the graphene are resolved on the terraces, as are fainter features attributed to atoms at the buried graphene/SiC interface.

36 MATERIALS SCIENCE↗

Evidence for charge order in organic superconductors obtained by vibrational spectrosocopy.

We study charge disproportionation in few quasi-two-dimensional BEDT-TTF-based compounds by following the temperature dependence of a charge-sensitive vibration v{sub 27}(B{sub 1u}) of BEDT-TTF molecule. While in a charge ordered insulator {theta}-(BEDT-TTF){sub 2}RbZn(SCN){sub 4} a difference between charge on the lattice sites is as high as 0.6e, a small charge disproportionation of 0.15-0.2e is found in two metallic compounds that become superconducting at low temperatures {beta}{double_prime}-(BEDT-TTF){sub 2}SF{sub 5}CH{sub 2}CF{sub 2}SO{sub 3} and {beta}-(EDT-TTF){sub 4}[Hg{sub 3}I{sub 8}]{sub (1-x)}. In contrast to these, a pure metallic {beta}{double_prime}-(BEDT-TTF){sub 2}SO{sub 3}CHFSF{sub 5} does not show any presence of charge disproportionation. This study suggests a correlation between a slight charge disproportionation in the metallic state and superconductivity.

36 MATERIALS SCIENCE↗

Questionnaires for eliciting evaluation data from users of interactive question answering

Evaluating interactive question answering (QA) systems with real users can be challenging because traditional evaluation measures based on the relevance of items returned are difficult to employ since relevance judgments can be unstable in multi-user evaluations. The work reported in this paper evaluates, in distinguishing among a set of interactive QA systems, the effectiveness of three questionnaires: a Cognitive Workload Questionnaire (NASA TLX), and Task and System Questionnaires customized to a specific interactive QA application. These Questionnaires were evaluated with four systems, seven analysts, and eight scenarios during a 2-week workshop. Overall, results demonstrate that all three Questionnaires are effective at distinguishing among systems, with the Task Questionnaire being the most sensitive. Results also provide initial support for the validity and reliability of the Questionnaires.

99 GENERAL AND MISCELLANEOUS↗

Morphology of graphene on SiC(0001) surfaces.

Graphene is formed on SiC(000{bar 1}) surfaces (the so-called C-face of the crystal) by annealing in vacuum, with the resulting films characterized by atomic force microscopy, Auger electron spectroscopy, scanning Auger microscopy, and Raman spectroscopy. Morphology of these films is compared with the graphene films grown on SiC(0001) surfaces (the Si-face). Graphene forms a terraced morphology on the C-face, whereas it forms with a flatter morphology on the Si-face. It is argued that this difference occurs because of differing interface structures in the two cases. For certain SiC wafers, nanocrystalline graphite is found to form on top of the graphene.

36 MATERIALS SCIENCE↗