Engineering Papers⌕ Search

Engineering topics

Sun, Pei

Publications and source records attributed to Sun, Pei.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Abstract for CRADA between National Energy Technology Laboratory and Blacksand Technology, LLC

The National Energy Technology Laboratory (NETL) and Black Sand Technology, LLC (Participant) will collaborate in the optimization of low-cost manufacturing routes to produce ultralow-oxygen reactive metal powders of M=Ti, Zr, and Nb using Mg or Ca as reduction agents. Reactive metals have a strong chemical affinity to oxygen, making it very challenging to produce high-purity metal powders of these elements with extremely low oxygen content. This project integrates multiscale modeling and experimental validation to provide fundamental understanding of the thermodynamic limits on the deoxygenation process through HDH and optimize the key deoxygenation parameters to achieve ultralow oxygen content ≤0.1 wt.% in the reactive metal powders. The collaboration will significantly expedite the optimization of deoxygenation processes, reducing the timeline for refining deoxygenation techniques for Ti, Zr and Nb and other reactive refractory metals by about 0.5 and 2 years, respectively. This accelerated timeline translates to substantial cost savings estimated at $\$$3 million in research and development expenditures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Extraction, Separation, and Production of High Purity Rare Earth Elements and Critical Minerals from Coal-Based and Related Resources

The general objectives of this project are to develop concepts for rare earth metal and critical mineral production from coal-based and related (minerals associated with coal) resources and incorporate them into a Technical Research Plan with an associated overall flow sheet. The project team has extensive expertise in market evaluation, mineral separation, leaching, chemical separations, alternative metallothermic reaction technology, electrowinning, and electrorefining that was critical to the success of the proposed project. The project included critical industrial partners needed for project success. The project team has extensive expertise in market evaluation, mineral separation, leaching, chemical separations, alternative reduction technology, electrowinning, and electrorefining as well as appropriate pilot-scale facilities to enable this project. The project encompassed broader opportunities for developing domestic resources of REE/CM materials for a more resilient, diverse, and secure supply chain for REE/CM materials with built-in redundancies and appropriate resource stockpiles. The production of REE/CM materials will help to revitalize and rebuild world-class American manufacturing capacity and the related workforce through new jobs and infrastructure. Furthermore, due to the nature and location of the production sites, economic growth in diverse communities of color and economically distressed areas will be cultivated. Finally, this technology can be applied to reuse and remediate coal waste tailings for REE/CM production.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Methods and systems for 3D printing with powders

A method of printing a three dimensional article (201) can include forming a bottom layer of the three dimensional article (201) by spraying a dry build material powder (210) onto a build platform (230) while heating the dry build material powder (210). The dry build material powder (210) can include metal or ceramic particles mixed with a polymeric binder having a softening point temperature. The dry build material powder (210) can be heated to a temperature above the softening point temperature such that the dry build material powder (210) adheres to the build platform (230). Subsequent layers can be formed by spraying dry build material powder (210) onto a lower layer while heating the dry build material powder (210) such that the dry build material powder (210) adheres to the lower layer.

Fang, Zhigang Zak↗
DOE OSTI2021

Methods of producing a titanium alloy product

A method for producing a particulate titanium alloy product can include preparing a composite particulate oxide mixture with TiO2 powder and at least one alloying element powder. The composite particulate oxide mixture can be co-reduced using a metallic reducing agent under a hydrogen atmosphere at a reduction temperature for a reduction time sufficient to produce a hydrogenated titanium alloy product. The hydrogenated titanium alloy product can then be heat treated under a hydrogen atmosphere and a heat treating temperature to reduce pore size and specific surface area to form a heat treated hydrogenated titanium product. The heat treated hydrogenated titanium product can be deoxygenated to reduce residual oxygen to less than 0.2 wt % to form a deoxygenated hydrogenated titanium product as a particulate. The deoxygenated hydrogenated titanium product can optionally be dehydrogenated to form the titanium alloy product as a particulate.

Fang, Zhigang Zak↗
DOE OSTI2020

Genetic identification of 91 poplar cultivars based on SSR markers

Accurate genetic identification and relationship analysis of poplar cultivars is necessary to establish commercial poplar plantations and select suitable breeding strategies. In this study, 91 poplar cultivars belonging to four sections (Aigeiros, Tacamahaca, Populus and Turanga) and inter/intra-sectional hybrids were genotyped using 18 polymorphic simple sequence repeat (SSR) markers. In total, 222 alleles were amplified with an average of 12.3 alleles per marker. The mean polymorphic information content and power of discrimination were 0.706 and 0.813, respectively. Five SSR markers (ORPM_103, ORPM_247, GCPM_1048, GCPM_1255 and LG_X_19) constituted a core fingerprint and were sufficient to identify all the tested cultivars. With some notable exceptions, cultivars of the same species generally clustered together in cluster (UPGMA) and ordination (PCO) analyses. Flow cytometry indicated that 11 poplar cultivars were triploid. Among these, seven had three alleles at some loci, suggesting that SSR markers could indicate the ploidy level to some extent. This study provides useful genetic information for the identification and protection of poplar cultivars in China and offers a guideline for the selection of poplar crossing parents based on ploidy level and genetic relationships.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Methods of producing a titanium product

A method (500) for producing a titanium product is disclosed. The method (500) can include obtaining TiO2-slag (501) and reducing impurities in the TiO2-slag (502) to form purified TiO2 (503). The method (500) can also include reducing the purified TiO2 using a metallic reducing agent (504) to form a hydrogenated titanium product comprising TiH2 (505). The hydrogenated titanium product can be dehydrogenated (506) to form a titanium product (508). The titanium product can also be optionally deoxygenated (507) to reduce oxygen content.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Genetic architecture of leaf morphological and physiological traits in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree revealed by quantitative trait locus analysis

Understanding the genetic architecture of leaf morphological and physiological traits will help plant breeders develop high biomass poplar genotypes. Quantitative trait locus (QTL) studies combining next-generation sequencing techniques can advance our understanding of the genetic basis of complex traits. In this study, we measured 13 leaf morphological and physiological traits and identified quantitative trait loci (QTLs) in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ F1 population (500 progenies) using a high-density genetic map constructed by whole genome re-sequencing. This linkage map consisted of 5796 single nucleotide polymorphism (SNP) markers assigned to 19 linkage groups (LGs), spanning 2683.80 centimorgans (cM) of genetic length, with an average marker density of 0.46 cM. We identified 109 QTLs on 18 LGs for leaf morphological traits and 55 QTLs on 14 LGs for leaf physiological traits. One-hundred eight putative candidate genes were identified within the candidate genomic region. Co-expression network and gene ontology enrichment analyses suggested that these candidate genes were involved in the photosynthetic process. The differential expression patterns of the CYCLIN (Potri.015G112200) and RED CHLOROPHYLL REDUCTASE (Potri.007G043600) genes between two parents indicated their potential roles in leaf morphological and physiological traits. These findings decipher the genetic architecture of leaf morphological and physiological traits in the P. deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree and provide candidate genes for future poplar genetic improvement.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Genome resequencing reveals demographic history and genetic architecture of seed salinity tolerance in Populus euphratica

Populus euphratica is a dominant tree species in desert riparian forests and possesses extraordinary adaptation to salinity stress. Exploration of its genomic variation and molecular underpinning of salinity tolerance is important for elucidating population evolution and identifying stress-related genes. Here, we identify approximately 3.15 million single nucleotide polymorphisms using whole-genome resequencing. The natural populations of P. euphratica in northwest China are divided into four distinct clades that exhibit strong geographical distribution patterns. Pleistocene climatic fluctuations and tectonic deformation jointly shaped the extant genetic patterns. A seed germination rate-based salinity tolerance index was used to evaluate seed salinity tolerance of P. euphratica and a genome-wide association study was implemented. A total of 38 single nucleotide polymorphisms were associated with seed salinity tolerance and were located within or near 82 genes. Expression profiles showed that most of these genes were regulated under salt stress, revealing the genetic complexity of seed salinity tolerance. Furthermore, DEAD-box ATP-dependent RNA helicase 57 and one undescribed gene (CCG029559) were demonstrated to improve the seed salinity tolerance in transgenic Arabidopsis. These results provide new insights into the demographic history and genetic architecture of seed salinity tolerance in desert poplar.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The effect of Ni doping on the mechanical behavior of tungsten

The effect of nickel (Ni) on activated sintering of tungsten has been known and investigated for decades. However, there are few reports on the mechanical properties of tungsten when Ni is added as a low alloying additive with less than 1 wt%. In this work, the mechanical behaviors of tungsten doped with 0.2–1.0 wt% nickel from room temperature up to 400 °C were investigated. The results show that the compression ductility of as-sintered Ni doped tungsten is drastically higher than that of as-sintered pure tungsten at all tested temperatures including room temperature, and the fracture toughness at room temperature is increased by 92%. The results suggest that the ductile-to-brittle transition temperature (DBTT) of tungsten can be reduced substantially by doping with Ni.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The WUSCHELa ( PtoWUSa ) is Involved in Developmental Plasticity of Adventitious Root in Poplar

WUSCHEL-RELATED HOMEOBOX (WOX) transcription factors play critical roles in cell fate determination during plant development. As the founding member of the WOX family, WUSCHEL (WUS) is characterized for its role in maintaining stem cell in meristem. In this study, we investigated the function of Populus tomentosa WUSCHELa (PtoWUSa) in adventitious roots (ARs) in poplar. Expression profile analysis showed that PtoWUSa was not only expressed in shoot apical meristem and stem, but also expressed in ARs. Ectopic expression of PtoWUSa in Arabidopsis resulted in shortened primary root, as well as agravitropism and multiple branches. Overexpression of PtoWUSa in poplar increased the number of ARs but decreased their length. Moreover, the AR tip and lateral root tip became larger and swollen. In addition, the expression of auxin transporter genes PIN-FORMED were downregulated in ARs of transgenic plant. Taken together, these results suggest that PtoWUSa could be involved in AR development in poplar through regulating the polar auxin transport in ARs.

59 BASIC BIOLOGICAL SCIENCES↗