Engineering Papers⌕ Search

Engineering topics

Sun, Jian

Publications and source records attributed to Sun, Jian.

At least 73 records · Page 4

Compositions and methods for the dissolution and depolymerization of lignin

The present invention provides for a method for dissolving and/or depolymerizing lignin comprising: (a) providing a composition comprising lignin, (b) contacting the composition with a strong hydrogen donor, such as a polyol, to form a first solution, (c) incubating the first solution at a temperature equal to or less than 100° C., whereby at least 20% by weight of the lignin is dissolved, (d) optionally introducing an oxidation agent to the first solution to form a second solution, wherein the temperature of the second solution is equal to or less than 100° C., whereby lignin is depolymerized, and (e) optionally introducing an anti-solvent to the second solution to precipitate the depolymerized lignin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and Evaluation of Distributed Energy Resource Device Models: Electric Vehicles, Electric Water Heaters, and Commercial Refrigeration Systems

In order to validate distributed energy resource (DER) models operated with grid services in the GMLC 1.4.2 team’s February (GMLC 2019a) and July (GMLC 2019b) reports, a test and measurement program using actual DER devices was conducted by national laboratories for three devices: (1) electric vehicles (EVs), (2) water heaters, and (3) commercial refrigeration. Test procedures were developed and carried out to identify the mathematical models and their parameters that describe the operational function, characterize the physics, and obey transient response of the devices. This report focuses on the experimental results obtained to develop and verify simulations of three specific EV models. This section summarizes elements of the mathematical model and shows the necessity data collected from the EVs while charging and discharging (driving). In the course of the study, we found it necessary to make some modifications to the model to deal with observed transient behavior. Section 1.2 details the model assumptions and equations, Section 1.3 provides details of the EVs tested, Section 1.4 outlines the test procedures developed for the projects, and Section 1.5 presents the experimental results obtained for the three different EVs tested and how these results compare to the models running the same test profiles.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Sub-Hertz resonance by weak measurement

Weak measurement (WM) with state pre- and post-selection can amplify otherwise undetectable small signals and thus has potential in precision measurement applications. Although frequency measurements offer the hitherto highest precision due to the stable narrow atomic transitions, it remains a long-standing interest to develop new schemes to further escalate their performance. Here, we demonstrate a WM-enhanced correlation spectroscopy technique capable of narrowing the resonance linewidth down to 0.1 Hz in a room-temperature atomic vapour cell. The potential of this technique for precision measurement is demonstrated through weak magnetic-field sensing. By judiciously pre- and post-selecting frequency-modulated input and output optical states in a nearly orthogonal manner, a sensitivity of 7 fT Hz -1/2 at a low frequency near DC is achieved using only one laser beam with 15 µW of power. Additionally, our results extend the WM framework to a non-Hermitian Hamiltonian and shed new light on metrology and bio-magnetic field sensing.

Science & Technology - Other Topics↗

Load Flexibility Analysis of Residential HVAC and Water Heating and Commercial Refrigeration

The emergence of connected devices and the Internet of Things has opened the door to the concept of widespread use of building equipment for load-side flexibility. This stems from the increased use of distributed and clean energy resources for electric generation and the growing demand for a more resilient and reliable grid. A significant challenge associated with the use of building equipment as a distributed energy resource is quantifying the magnitude of power or energy flexibility. Unlike batteries that have well-defined and relatively constant capacity and maximum charge/discharge rates, building equipment often has characteristics that vary based on external factors (e.g., weather or occupant behavior). This makes quantifying the availability and flexibility of these resources difficult. Controlling a fleet of equipment while minimizing any adverse impacts to the occupants (e.g., discomfort or food spoilage) is a nontrivial matter. Although there are many different control methodologies available, this study focuses on two: priority-based control (PBC) and model-predictive control (MPC). These were selected because they represent two ends of the control spectrum. PBC is a relatively simple control strategy that requires only the current state of the devices to be controlled and an estimate of how much power each device consumes when turned on. MPC is much more complex and requires a model of the system and forecasts of any disturbances that influence the system. Because MPC has a predictive element, it can prepare for a desired response before the event and therefore is expected to provide a more optimal control relative to PBC. Both MPC and PBC are compared with a baseline simulation that uses feedback control typical of the thermostatically controlled devices being evaluated. This report investigates the load flexibility of three building systems: residential air conditioners, residential water heaters, and commercial refrigeration. Air heating and cooling and water heating account for 45% of residential electricity use, making them good candidates for providing load flexibility. Refrigeration in commercial buildings accounts for 16% of commercial building electricity use, making it another good candidate. Simplified models of each system were generated and validated based on measured data from actual equipment. These models were used to simulate the thermal and power response of the systems using PBC and MPC for a fleet of devices trying to achieve a variety of different responses, including hourly load shed, hourly load up, and daily peak demand reduction. Significant findings from each piece of equipment follow.

42 ENGINEERING↗

Methyl Ketones from Municipal Solid Waste Blends by One‐Pot Ionic‐Liquid Pretreatment, Saccharification, and Fermentation

Abstract The conversion of municipal solid waste (MSW) and lignocellulosic biomass blends to methyl ketones (MKs) was investigated by using bioderived ionic liquid (bionic liquid)‐based hydrolysates followed by fermentation with an engineered Escherichia coli strain. The hydrolysates were produced by a one‐pot process using six types of MSW–biomass blends, choline‐based bionic liquids, and commercial enzymes. Based on the sugar yields, one blend (corn stover/MSW=95:5, w / w ) and two bionic liquids {cholinium lysinate ([Ch][Lys]) and cholinium aspartate ([Ch] 2 [Asp])} were selected for scale‐up studies. Maximum yields of 82.3 % glucose and 54.4 % xylose were obtained from the selected blend in the scale‐up studies (6 L), which was comparable with 83.6 % glucose and 52.8 % xylose obtained at a smaller scale (0.2 L). Comparable or higher yields of medium‐chain (C 11 –C 17 ) MKs were achieved by using the MSW–biomass blend‐derived hydrolysates, relative to the sugar controls (glucose and xylose) with similar sugar feeding concentrations. Up to 1145 mg L −1 of MKs was produced by using MSW–biomass‐derived hydrolysates, and the MK titer decreased to 300 mg L −1 when the bionic‐liquid concentration in the hydrolysate increased from 1 to 2 %, indicative of bionic‐liquid inhibition. Technoeconomic analysis was conducted to investigate the economic potential of using the selected MSW–biomass blend as a feedstock to produce MKs.

Yan, Jipeng↗

Phase Behavior of Mixed Polymer Brushes Grown from Ultrathin Coatings

Experimental validation of the predicted melt phase behavior of A/B mixed or binary brush on planar substrate is presented using poly(methyl methacrylate) (A)/ polystyrene (B) (PMMA/PS) with equal number of A/B chains as an example. Specifically, well-defined mixed A/B brushes are synthesized using a single component inimer coating to achieve high grafting density (0.9 chains/ nm 2 ), uniformity of grafting sites, and predictable chain length. The inimer coating is a copolymer ofnitroxide-mediated polymerization (NMP) inimer, atom transfer radical polymerization (ATRP) inimer, styrene, and glycidyl methacrylate (GMA). Cross-linking of the film provides the required stability to probe the melt morphology. Our studies show that even with equal grafting density of the A and B the morphology can be modulated by varying the length of B chains while keeping that of A fixed. We show the very first example of transition of self-assembled structures from disorder to cylinder to ripple phase at sub-30 nm length scale on a planar surface by thermal annealing of mixed brushes. These results are supported by a new phase diagram established through Monte-Carlo simulation using a coarse-grained particle-based model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Scale-Dynamic Network Abstraction Approach for Traffic Analysis

The necessary trade-off between accuracy and efficiency of various traffic simulation tools depends on the resolution of the roadway network. While a detailed high-resolution road network could better represent connectivity of real-world road network and ensure an accurate simulation result, a low-resolution network omitting trivial details could reduce computational burden and improve the computational efficiency of traffic simulation. This study focuses on dynamically adjusting the roadway network resolution during the process of simulation-based dynamic traffic assignment (SBDTA) with the objective to expedite both the simulation and the assignment within SBDTA. We propose to divide the whole time horizon into several periods dynamically and to Abstract the network for each period separately. The result showed that half of the CPU time for both the simulation and the assignment is saved, while the network performance remains consistent or near consistent compared with the scenario using the most detailed network.

33 ADVANCED PROPULSION SYSTEMS↗

Fabrication, Microstructures, and Properties of 50 vol.% SiCp/6061Al Composites via Hot Pressing

Nearly fully dense 50 vol.% SiCp/6061Al composites were fabricated via hot pressing (HPing) at temperatures ranging from 610 to 650 °C, with the axial load and holding time fixed as 25 MPa and 120 min, respectively. The interfacial reactions, microstructures, and properties of the SiCp/Al alloy were studied. The interface reaction between SiCp and the Al alloy was suppressed at annealing temperatures of 620 °C and below; however, the reaction intensified as the annealing temperature increased, producing Al{sub 4}C{sub 3}, Si, and Mg{sub 2}Si. With an increase in HPing temperature from 610 to 630 °C, the 6061Al alloy melted and gradually filled the pores in the SiC particles under the applied load. The density, bending strength, and thermal conductivity (TC) of the composites increased, whereas the coefficient of thermal expansion (CTE) of the composites decreased. With an increase in HPing temperature increased from 630 to 650 °C, the 6061Al alloy melt leaked through the sintered bodies, resulting in the microstructural degradation and property reduction of the composites. The 50 vol.% SiCp/6061Al composites fabricated by HPing at 630 °C exhibited optimal comprehensive properties [bending strength, 332.4 MPa; TC, 186.3 W(m K){sup −1}; and CTE, 7.9 × 10{sup −6}/°C (20-100 °C)], which were attributed to the highest relative density and the best SiCp/Al interfacial structure of the composites.

36 MATERIALS SCIENCE↗