Engineering Papers⌕ Search

Engineering topics

Sun, Hao

Publications and source records attributed to Sun, Hao.

32 records · Page 2

Inhibition of CIP2A attenuates tumor progression by inducing cell cycle arrest and promoting cellular senescence in hepatocellular carcinoma

Highlights: • High expression level of CIP2A was frequently observed in hepatocellular carcinoma (HCC). • CIP2A expression level was associated with unfavorable overall and recurrence-free survival in HCC patients. • Inhibition of CIP2A attenuated HCC progression via inducing cell cycle arrest and promoting cellular senescence. CIP2A is a recent identified oncogene that inhibits protein phosphatase 2A (PP2A) and stabilizes c-Myc in cancer cells. To investigate the potential oncogenic role and prognostic value of CIP2A, we comprehensively analyzed the CIP2A expression levels in pan-cancer and observed high expression level of CIP2A in majority cancer types, including hepatocellular carcinoma (HCC). Based on a validation cohort including 60 HCC and 20 non-tumorous tissue samples, we further confirmed the high mRNA and protein expression levels of CIP2A in HCC, and found high CIP2A mRNA expression level was associated with unfavorable overall and recurrence-free survival in patients with HCC. Mechanistic investigations revealed that inhibition of CIP2A significantly attenuated cellular proliferation in vitro and tumourigenicity in vivo. Bioinformatic analysis suggested that CIP2A might be involved in regulating cell cycle. Our experimental data further confirmed CIP2A knockdown induced cell cycle arrest at G1 phase. We found accumulated cellular senescence in HCC cells with CIP2A knockdown, companying expression changes of senescence associated proteins (p21, CDK2, CDK4, cyclin D1, MCM7 and FoxM1). Mechanistically, CIP2A knockdown repressed FoxM1 expression and induced FoxM1 dephosphorylation. Moreover, inhibition of PP2A by phosphatase inhibitor rescued the repression of FoxM1. Taken together, our results showed that CIP2A was highly expressed in HCC. Inhibition of CIP2A induced cell cycle arrest and promoted cellular senescence via repressing FoxM1 transcriptional activity, suggesting a potential anti-cancer target for patients with HCC.

60 APPLIED LIFE SCIENCES↗

Direct observation of the effects of cellulose synthesis inhibitors using live cell imaging of Cellulose Synthase (CESA) in Physcomitrella patens

Results from live cell imaging of fluorescently tagged Cellulose Synthase (CESA) proteins in Cellulose Synthesis Complexes (CSCs) have enhanced our understanding of cellulose biosynthesis, including the mechanisms of action of cellulose synthesis inhibitors. However, this method has been applied only in Arabidopsis thaliana and Brachypodium distachyon thus far. Results from freeze fracture electron microscopy of protonemal filaments of the moss Funaria hygrometrica indicate that a cellulose synthesis inhibitor, 2,6-dichlorobenzonitrile (DCB), fragments CSCs and clears them from the plasma membrane. This differs from Arabidopsis, in which DCB causes CSC accumulation in the plasma membrane and a different cellulose synthesis inhibitor, isoxaben, clears CSCs from the plasma membrane. In this study, live cell imaging of the moss Physcomitrella patens indicated that DCB and isoxaben have little effect on protonemal growth rates, and that only DCB causes tip rupture. Live cell imaging of mEGFP-PpCESA5 and mEGFP-PpCESA8 showed that DCB and isoxaben substantially reduced CSC movement, but had no measureable effect on CSC density in the plasma membrane. These results suggest that DCB and isoxaben have similar effects on CSC movement in P. patens and Arabidopsis, but have different effects on CSC intracellular trafficking, cell growth and cell integrity in these divergent plant lineages.

59 BASIC BIOLOGICAL SCIENCES↗

Compressed glassy carbon: An ultrastrong and elastic interpenetrating graphene network

Carbon’s unique ability to have both sp 2 and sp 3 bonding states gives rise to a range of physical attributes, including excellent mechanical and electrical properties. We show that a series of lightweight, ultrastrong, hard, elastic, and conductive carbons are recovered after compressing sp 2 -hybridized glassy carbon at various temperatures. Compression induces the local buckling of graphene sheets through sp 3 nodes to form interpenetrating graphene networks with long-range disorder and short-range order on the nanometer scale. The compressed glassy carbons have extraordinary specific compressive strengths—more than two times that of commonly used ceramics—and simultaneously exhibit robust elastic recovery in response to local deformations. Finally, this type of carbon is an optimal ultralight, ultrastrong material for a wide range of multifunctional applications, and the synthesis methodology demonstrates potential to access entirely new metastable materials with exceptional properties.

36 MATERIALS SCIENCE↗

Vertically oriented arrays of ReS 2 nanosheets for electrochemical energy storage and electrocatalysis

Here, transition-metal dichalcogenide (TMD) nanolayers show potential as high-performance catalysts in energy conversion and storage devices. Synthetic TMDs produced by chemical-vapor deposition (CVD) methods tend to grow parallel to the growth substrate. Here, we show that with the right precursors and appropriate tuning of the CVD growth conditions, ReS 2 nanosheets can be made to orient perpendicular to the growth substrate. This accomplishes two important objectives; first, it drastically increases the wetted or exposed surface area of the ReS 2 sheets, and second, it exposes the sharp edges and corners of the ReS 2 sheets. We show that these structural features of the vertically grown ReS 2 sheets can be exploited to significantly improve their performance as polysulfide immobilizers and electrochemical catalysts in lithium–sulfur (Li–S) batteries and in hydrogen evolution reactions (HER). After 300 cycles, the specific capacity of the Li–S battery with vertical ReS 2 catalyst is retained above 750 mA h g –1 , with only ~0.063% capacity decay per cycle, much better than the baseline battery (without ReS 2 ), which shows ~0.184% capacity decay per cycle under the same test conditions. As a HER catalyst, the vertical ReS 2 provides very small onset overpotential (<100 mV) and an exceptional exchange-current density (~67.6 μA/cm 2 ), which is vastly superior to the baseline electrode without ReS 2 .

2D materials↗

Illumination Angle Insensitive Single Indium Phosphide Tapered Nanopillar Solar Cell

Low cost, high efficiency photovoltaic can help accelerate the adoption of solar energy. Using tapered indium phosphide nanopillars grown on a silicon substrate, we demonstrate a single nanopillar photovoltaic exhibiting illumination angle insensitive response. Furthermore, the photovoltaic employs a novel regrown core–shell p-i-n junction to improve device performance by eliminating shunt current paths, resulting in a high V OC of 0.534 V and a power conversion efficiency of 19.6%. Enhanced broadband light absorption is also demonstrated over a wide spectral range of 400–800 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Failure behavior after stepwise uniaxial extension of entangled polymer melts

This paper studies how stepwise extension of various well-entangled polymer melts produce mechanical/structural breakdowns during stress relaxation. Depending on how stepwise extension is imposed on five different styrene-butadiene random copolymers, two different forms of specimen failure are observed. When a step extension is produced with a low Hencky rate or to a low strain below some thresholds, the sample breaks up rather sharply after an appreciable period of induction during which the stress relaxes quiescently. After step extension, the sample draws and undergoes unsustainable necking due to shear yielding, if the step extension is produced with a Hencky rate higher than the Rouse relaxation rate and the magnitude is beyond a Hencky strain of 1.5. Moreover, introduction of long-chain branching suppresses the elastic breakup, postponing it to Hencky strains beyond 2.5. The clearly identifiable characteristics of the elastic yielding may be understood in terms of some speculative interpretations. Finally, more convincing explanations have yet to come from future computer experiments that hopefully the present work is able to motivate.

36 MATERIALS SCIENCE↗

Influence of O{sub 2} on the dielectric properties of CO{sub 2} at the elevated temperatures

SF{sub 6} gas is widely used in the high voltage circuit breakers but considering its high global warming potential other substitutes are being sought. Among them CO{sub 2} was investigated and even has been used in some practical products. However, at room temperature, the dielectric properties of CO{sub 2} are relatively lower than SF{sub 6} and air. The goal of this work is to investigate a CO{sub 2}-based gas to improve the performance of the pure CO{sub 2}. In this paper, the dielectric properties of hot CO{sub 2}/O{sub 2} mixtures related to the dielectric recovery phase of the circuit breaker were investigated in the temperature range from 300 K to 4000 K and in the pressure range from 0.01 MPa to 1.0 MPa. The species compositions of hot CO{sub 2}/O{sub 2} were obtained based on Gibbs free energy minimization under the assumptions of local thermodynamic equilibrium and local chemical equilibrium. The reduced critical electric field strength of CO{sub 2}/O{sub 2} was determined by balancing electron generation and loss. These were calculated using the electron energy distribution function by solving the Boltzmann transport equation. The validity of the calculation method and the cross sections data was confirmed by comparing the measurements and calculations of the electron swarm data in previous work. The results indicate that in pure CO{sub 2} the critical electric field strength is higher only in higher temperature range. By adding the O{sub 2} into the CO{sub 2}, the critical electric field strength at lower temperature is effectively enhanced. CO{sub 2}/O{sub 2} mixtures have a much better dielectric strength than both the pure CO{sub 2} and air and thus have the potential to improve the CO{sub 2}-based gas circuit breakers. Similar conclusions can also be found in others’ work, which further confirm the validity of these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Electronic Level Alignment at Weakly Coupled Organic Film/Metal Interfaces

Electronic level alignment at interfaces of molecular materials with inorganic semiconductors and metals controls many interfacial phenomena. How the intrinsic properties of the interacting systems define the electronic structure of their interface remains one of the most important problems in molecular electronics and nanotechnology that can be solved through a combination of surface science experimental techniques and theoretical modeling. In this article, we address this fundamental problem through experimental and computational studies of molecular electronic level alignment of thin films of C6F6 on noble metal surfaces. The unoccupied electronic structure of C6F6 is characterized with single molecule resolution using low-temperature scanning tunneling microscopy-based constant-current distance-voltage spectroscopy. The experiments are performed on several noble metal surfaces with different work functions and distinct surface-normal projected band structures. In parallel, the electronic structures of the quantum wells (QWs) formed by the lowest unoccupied molecular orbital state of the C6F6 monolayer and multilayer films and their alignment with respect to the vacuum level of the metallic substrates are calculated by solving the Schrödinger equation for a semiempirical one-dimensional (1D) potential of the combined system using input from density functional theory. Our analysis shows that the level alignment for C6F6 molecules bound through weak van der Waals interactions to noble metal surfaces is primarily defined by the image potential of metal, the electron affinity of the molecule, and the molecule surface distance. We expect the same factors to determine the interfacial electronic structure for a broad range of molecule/metal interfaces.

Environmental Molecular Sciences Laboratory↗

Self-Catalyzed Carbon Dioxide Adsorption by Metal-Organic Chains on Gold Surfaces

Efficient capture of CO2 by chemical means requires a microscopic understanding of the interactions of the molecule-substrate bonding and adsorption-induced collective phenomena. By molecule-resolved imaging with scanning tunneling microscopy (STM), we investigate self-catalyzed CO2 adsorption on one-dimensional (1D) substrates composed of self-assembled metal-organic chains (MOCs) supported on gold surfaces. CO2 adsorption turns on attractive interchain interactions, which induce pronounced surface structural changes; the initially uniformly dispersed chains gather into close packed bundles, which are held together by highly ordered, single molecule wide CO2 ranks. CO2 molecules create more favorable adsorption sites for further CO2 adsorption by mediating the interchain attraction, thereby self-catalyzing their capture. The release of CO2 molecules by thermal desorption returns the MOCs to their original structure, indicating that the CO2 capture and release are reversible processes. The real space microscopic characterization of the self-catalyzed CO2 adsorption on 1D substrates could be exploited as platform for design of molecular materials for CO2 capture and reduction.

Environmental Molecular Sciences Laboratory↗

Next-to-leading order corrections to e{sup +}e{sup -{yields}}W{sup +}W{sup -}Z and e{sup +}e{sup -{yields}}ZZZ

We calculate the one-loop electroweak corrections to e{sup +}e{sup -{yields}}W{sup +}W{sup -}Z and e{sup +}e{sup -{yields}}ZZZ and analyze their impacts on both the total cross section and some key distributions. These processes are important for the measurements of the quartic couplings of the massive gauge bosons which can be a window on the mechanism of spontaneous symmetry breaking. We find that even after subtracting the leading QED corrections, the electroweak corrections can still be large, especially as the energy increases. We compare and implement different methods of dealing with potential instabilities in the routines pertaining to the loop integrals. For the real corrections we apply a dipole subtraction formalism and compare it to a phase-space slicing method.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Relic density at one-loop with gauge boson pair production

We have computed the full one-loop corrections (electroweak as well as QCD) to processes contributing to the relic density of dark matter in the minimal supersymmetric standard model where the lightest supersymmetric particle is the lightest neutralino. We cover scenarios where the most important channels are those with gauge boson pair production. This includes the case of a bino with some wino admixture, a Higgsino and a wino. In this paper we specialize to the case of light dark matter much below the TeV scale. The corrections can have a non-negligible impact on the predictions and should be taken into account in view of the present and forthcoming increasing precision on the relic density measurements. Our calculations are made with the help of SLOOPS, an automatic tool for the calculation of one-loop processes in the minimal supersymmetric standard model. The renormalization scheme dependence of the results as concerns tan{beta} is studied.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗