Engineering Papers⌕ Search

Engineering topics

Sun, Cheng-Jun

Publications and source records attributed to Sun, Cheng-Jun.

At least 73 records · Page 4

Durable hybrid electrocatalysts for proton exchange membrane fuel cells

The low durability of carbon-based non-precious metal electrocatalysts hinders their practical applications in proton exchange membrane fuel cells (PEMFCs). In this study, we rationally design a hybrid Pt-Fe-N-C electrocatalyst with unprecedented durability. It consists of abundant Pt and Fe single atoms homogeneously dispersed on the nitrogen-doped carbon support and a small amount of Pt-Fe alloy nanoparticles. A PEMFC with Pt-Fe-N-C as the cathode shows a larger peak power density (0.75 W cm -2 ) than that with Fe-N-C as the cathode (0.50 W cm -2 ). The remarkable durability of Pt-Fe-N-C is reflected from no noticeable drop in the half-wave potential after 70000 potential cycles between 0.6 and 1.0 V in the liquid cell, and 80% current retention after 85 h of potential hold at 0.4 V in the fuel cell. This work demonstrates the feasibility of improving the durability of Fe-N-C material via ultra-low Pt doping and makes non-precious metal electrocatalysts be close to achieving commercial metrics.

25 ENERGY STORAGE↗

Highly Reversible Sodiation/Desodiation from a Carbon-Sandwiched SnS2 Nanosheet Anode for Sodium Ion Batteries

The further improvement of sodium ion batteries requires the elucidation of the mechanisms pertaining to reversibility, which allows the novel design of the electrode structure. Her; through a hydrogel-embedding method, we are able to confine the growth of few-layer SnS 2 nanosheets between a nitrogen- and sulfur-doped carbon nanotube (NS-CNT) and amorphous carbon. The obtained carbon-sandwiched SnS 2 nanosheets demonstrate excellent sodium storage properties. In operando small-angle X-ray scattering combined with the ex situ X-ray absorption near edge spectra reveal that the redox reactions between SnS 2 /NS-CNT and the sodium ion are highly reversible. Furthermore, on the contrary, the nanostructure evolution is found to be irreversible, in which the SnS 2 nanosheets collapse, followed by the regeneration of SnS 2 nanoparticles. This work provides operando insights into the chemical environment evolution and structure change of SnS 2 -based anodes, elucidating its reversible reaction mechanism, and illustrates the significance of engineered carbon support in ensuring the electrode structure stability.

25 ENERGY STORAGE↗

Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO 2 Cathode in Li-Metal Batteries

Doping chemistry has been regarded as an efficient strategy to overcome some fundamental challenges facing the “no-cobalt” LiNiO 2 cathode materials. By utilizing the doping chemistry, we evaluate the battery performance and structural/chemical reversibility of a new no-cobalt cathode material (Mg/Mn-LiNiO 2 ). The unique dual dopants drive Mg and Mn to occupy the Li site and Ni site, respectively. We report the Mg/Mn-LiNiO 2 cathode delivers smooth voltage profiles, enhanced structural stability, elevated self-discharge resistance, and inhibited nickel dissolution. As a result, the Mg/Mn-LiNiO 2 cathode enables improved cycling stability in lithium metal batteries with the conventional carbonate electrolyte: 80% capacity retention after 350 cycles at C /3, and 67% capacity retention after 500 cycles at 2 C (22 °C). We then take the Mg/Mn-LiNiO 2 as the platform to investigate the local structural and chemical reversibility, where we identify that the irreversibility takes place starting from the very first cycle. The highly reactive surface induces the surface oxygen loss, metal reduction reaching the subsurface, and metal dissolution. Our data demonstrate that the dual dopants can, to some degree, mitigate the irreversibility and improve the cycling stability of LiNiO 2 , but more efforts are needed to eliminate the key challenges of these materials for battery operation in the conventional carbonate electrolyte.

25 ENERGY STORAGE↗

Broadband Tunable Mid-infrared Plasmon Resonances in Cadmium Oxide Nanocrystals Induced by Size-Dependent Nonstoichiometry

A central theme of nanocrystal (NC) research involves synthesis of dimension-controlled NCs and study of size-dependent scaling laws governing their optical, electrical, magnetic, and thermodynamic properties. In this paper, we describe the synthesis of monodisperse CdO NCs that exhibit high quality-factor (up to 5.5) mid-infrared (MIR) localized surface plasmon resonances (LSPR) and elucidate the inverse scaling relationship between carrier concentration and NC size. The LSPR wavelength is readily tunable between 2.4 and similar to 6.0 μm by controlling the size of CdO NCs. Structural and spectroscopic characterization provide strong evidence that free electrons primarily originate from self-doping due to NC surface-induced nonstoichiometry. The ability to probe and to control NC stoichiometry and intrinsic defects will pave the way toward predictive synthesis of doped NCs with desirable LSPR characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ and operando investigation of the dynamic morphological and phase changes of a selenium-doped germanium electrode during (de)lithiation processes

To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge 0.9 Se 0.1 electrode, the dynamic morphological and phase changes of the Ge 0.9 Se 0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge 0.9 Se 0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge 0.9 Se 0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge 0.9 Se 0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li 15 Ge 4 phase. Finally, these in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.

25 ENERGY STORAGE↗

Facet-dependent active sites of a single Cu 2 O particle photocatalyst for CO 2 reduction to methanol

Atomic level understanding of the active sites and transformation mechanisms under realistic working conditions are pre-requisites for rational design of high performance photocatalysts. By using correlated scanning fluorescence x-ray microscopy and environmental transmission electron microscopy at atmospheric pressure, in operando, we directly observed that the (110) facet of a single Cu 2 O photocatalyst particle is photocatalytically active for CO 2 reduction to methanol while the (100) facet is inert. The oxidation state of the active sites changed from Cu(I) towards Cu(II) due to CO 2 and H 2 O coadsorption and changed back to Cu+ after CO 2 conversion under visible light illumination. The Cu 2 O photocatalyst oxidized water as it reduced CO 2 . At the same time, the crystal lattice expanded due to CO 2 adsorption then reverted after CO 2 conversion. The internal quantum yield for unassisted wireless photocatalytic reduction of CO 2 to methanol using Cu 2 O crystals is ~ 72% with 10% solar to fuel efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dopant Distribution in Co-Free High-Energy Layered Cathode Materials

The practical implementation of Co-free, LiNiO 2 -derived cathodes has been prohibited by their poor cycle life and thermal stability, concluded from the structural instability, phase transformations, reactive surfaces, and chemomechanical breakdown. With the hierarchical distribution of Mg/Ti dual dopants in LiNiO 2 , we report a Co-free layered oxide that exhibits enhanced bulk and surface stability. Ti shows a gradient distribution and is enriched at the surface, whereas Mg distributes homogeneously throughout the primary particles. The resulting Mg/Ti codoped LiNiO 2 delivers a material-level specific energy of ~780 W h/kg at C/10 with 96% retention after 50 cycles. The specific energy reaches ~680 W h/kg at 1C with 77% retention after 300 cycles. Furthermore, the Mg/Ti dual dopants improve the rate capability, thermal stability, and self-discharge resistance of LiNiO 2 . Our synchrotron X-ray, electron, and electrochemical diagnostics reveal that the Mg/Ti dual dopants mitigate phase transformations, reduce nickel dissolution, and stabilize the cathode–electrolyte interface, thus leading to the favorable battery performance in lithium metal and graphite cells. The current study suggests that engineering the dopant distribution in cathodes may provide an effective path toward lower cost, safer, and higher energy density Co-free lithium batteries.

25 ENERGY STORAGE↗

An Ordered P2/P3 Composite Layered Oxide Cathode with Long Cycle Life in Sodium-Ion Batteries

Developing stable cathode materials represents a crucial step toward long-life sodium-ion batteries. P2-type layered oxides are important as cathodes for their reversibility, but their long-term performance in full cells remains a key challenge. Herein, we report Na 0.75 Co 0.125 Cu 0.125 Fe 0.125 Ni 0.125 Mn 0.5 O 2 with an intergrowth of ordered P2 and P3 phases, studied by neutron diffraction and Rietveld refinement. A stable electrochemical performance is achieved in Na half cells with 100% capacity retention at a rate of C/10 after 100 cycles (initial capacity of 90 mAh/g), 96% capacity retention at a rate of 1 C after 500 cycles (initial capacity of 70 mAh/g), and 85% capacity retention at a rate of 5 C after 1000 cycles (initial capacity of 55 mAh/g). Stable full cell performance is achieved with 84.2% capacity retention after 1000 cycles at a rate of 1 C. Synchrotron X-ray diffraction, spectroscopy, and imaging are applied to elucidate the relationship between chemical/structural evolution and battery performance. A reversible local and global structural evolution is observed during initial cycles. Meanwhile, the challenges with enabling prolonged cycling (beyond 1000 cycles) may be associated with Fe dissolution and formation of a copper oxide phase. This study implies that cathodes with complex chemical and structural formations may stabilize electrochemical performance and highlights the importance of decoupling the contribution of each transition metal to performance degradation.

25 ENERGY STORAGE↗

Targeted Surface Doping with Reversible Local Environment Improves Oxygen Stability at the Electrochemical Interfaces of Nickel-Rich Cathode Materials

Elemental doping represents a prominent strategy to improve interfacial chemistry in battery materials. Manipulating the dopant spatial distribution and understanding the dynamic evolution of the dopants at the atomic scale can inform better design of the doping chemistry for batteries. Herein, we create a targeted hierarchical distribution of Ti 4+ , a popular doping element for oxide cathode materials, in LiNi 0.8 Mn 0.1 Co 0.1 O 2 primary particles. We apply multiscale synchrotron/electron spectroscopy and imaging techniques as well as theoretical calculations to investigate the dynamic evolution of the doping chemical environment. The Ti 4+ dopant is fully incorporated into the TMO6 octahedral coordination and is targeted to be enriched at the surface. Ti 4+ in the TMO 6 octahedral coordination increases the TM–O bond length and reduces the covalency between (Ni, Mn, Co) and O. The excellent reversibility of Ti 4+ chemical environment gives rise to superior oxygen reversibility at the cathode–electrolyte interphase and in the bulk particles, leading to improved stability in capacity, energy, and voltage. Our work directly probes the chemical environment of doping elements and helps rationalize the doping strategy for high-voltage layered cathodes.

25 ENERGY STORAGE↗

Revealing Electronic Signatures of Lattice Oxygen Redox in Lithium Ruthenates and Implications for High-Energy Li-Ion Battery Material Designs

Anion redox in lithium transition-metal oxides such as Li 2 RuO 3 and Li 2 MnO 3 has catalyzed intensive research efforts to find transition-metal oxides with anion redox that may boost the energy density of lithium-ion batteries. The physical origin of the observed anion redox remains debatable, and more direct experimental evidence is needed. In this work, we have shown electronic signatures of oxygen–oxygen coupling, direct evidence central to lattice oxygen redox (O 2- /(O 2 ) n- ), in charged Li 2– $_x$RuO 3 after Ru oxidation (Ru 4+ /Ru 5+ ) upon first electron removal with lithium deintercalation. Experimental Ru L 3 -edge high-energy-resolution fluorescence-detected X-ray absorption spectra (HERFD-XAS), supported by ab initio simulations, revealed that the increased intensity in the high-energy shoulder upon lithium deintercalation resulted from increased O–O coupling, inducing (O–O) σ*-like states with π overlap with Ru d-manifolds, in agreement with O K-edge XAS spectra. Experimental and simulated O K-edge X-ray emission spectra further supported this observation with the broadening of the oxygen nonbonding feature upon charging, also originated from (O–O) σ* states. This lattice oxygen redox of Li 2–x RuO 3 was accompanied by a small amount of O 2 evolution in the first charge from differential electrochemistry mass spectrometry but diminished in the subsequent cycles, in agreement with the more reduced states of Ru in later cycles from Ru L 3 -edge HERFD-XAS. These observations indicated that Ru redox contributed more to discharge capacities after the first cycle. This study has pinpointed the key spectral fingerprints related to lattice oxygen redox from a molecular level and constructed a transferrable framework to rationally interpret the spectroscopic features by combining advanced experiments and theoretical calculations to design materials for Li-ion batteries and electrocatalysis applications.

25 ENERGY STORAGE↗

Thickness-dependent polarization-induced intrinsic magnetoelectric effects in L a 0.67 S r 0.33 Mn O 3 / PbZ r 0.52 T i 0.48 O 3 heterostructures

The polarization of PbZr 0.52 Ti 0.48 O 3 thin film is switched by changing film thickness through the competition between the strain relaxation-induced flexoelectric fields and the interfacial effects. Without an applied electric field, this reversal of polarization is exploited to control the magnetic properties of La 0.67 Sr 0.33 MnO 3 by the competition/cooperation between the charge-mediated and the strain-mediated effects. Scanning transmission electron microscopy, polarized near-edge x-ray absorption spectroscopy, and half-integer diffraction measurements are employed to decode the intrinsic magnetoelectric effects in the La 0.67 Sr 0.33 MnO 3 /PbZr 0.52 Ti 0.48 O 3 heterostructures. Here, with PbZr 0.52 Ti 0.48 O 3 films <48nm, the polarization-driven carrier density modulation around the La 0.67 Sr 0.33 MnO 3 /PbZr 0.52 Ti 0.48 O 3 interface and the strain-mediated Mn 3d orbital occupancy work together to enhance the magnetism of 14-unit-cell La 0.67 Sr 0.33 MnO 3 film; with PbZr 0.52 Ti 0.48 O 3 layers > 48nm, the strain-induced change of bond length/angle of MnO 6 accompanied with a modified spin configuration are responsible for the decrease in the Curie temperature and magnetization of 14-unit-cell La 0.67 Sr 0.33 MnO 3 film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of a containment apparatus for synchrotron XAS measurements of radioactive fluid samples under high temperatures and pressures

The simple working principles and versatility of the hydrothermal diamond-anvil cell (HDAC) make it signifcantly useful for synchrotron x-ray studies of aqueous and fluid samples at high pressure-temperature (P-T) conditions. Yet, safety concerns need to be overcome in order to use the HDAC for synchrotron studies of aqueous radioactive samples at high temperatures and pressures. For accomplishment of such hydrothermal experiments of radioactive materials at synchrotron beamlines, the samples are required to be enclosed in a containment system employing three independent layers of airtight sealing at some synchrotron facilities while enabling access to the sample using several experimental probes, including incoming and outgoing x-rays. In this article, we report the design and implementation of a complete radiological safety enclosure system for an HDAC specialized for high P-T x-ray absorption spectroscopy (XAS) measurements of aqueous solutions containing the actinides at synchrotron beamlines. The enclosure system was successfully tested for XAS experiments using the HDAC with aqueous samples containing depleted uranium at temperatures ranging from 25 to 500 °C and pressures ranging from vapor pressure to 350 MPa.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cobalt-Based Nonprecious Metal Catalysts Derived from Metal–Organic Frameworks for High-Rate Hydrogenation of Carbon Dioxide

The development of cost-effective catalysts with both high activity and selectivity for carbon–oxygen bond activation is a major challenge and has important ramifications for making value-added chemicals from carbon dioxide (CO 2 ). Herein, we present a one-step pyrolysis of metal organic frameworks that yields highly dispersed cobalt nanoparticles embedded in a carbon matrix which shows exceptional catalytic activity in the reverse water gas shift reaction. Incorporation of nitrogen into the carbon-based supports resulted in increased reaction activity and selectivity toward carbon monoxide (CO), likely because of the formation of a Mott–Schottky interface. At 300 °C and a high space velocity of 300 000 mL g –1 h –1 , the catalyst exhibited a CO 2 conversion rate of 122 μmolCO 2 g –1 s –1 , eight times higher than that of a reference Cu/ZnO/Al 2 O 3 catalyst. Our experimental and computational results suggest that nitrogen-doping lowers the energy barrier for the formation of formate intermediates (CO 2 * + H* → COOH* + *), in addition to the redox mechanism (CO 2 * + * → CO* + O*). This enhancement is attributed to the efficient electron transfer at the cobalt–support interface, leading to higher hydrogenation activity and opening new avenues for the development of CO 2 conversion technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of non-local screening in K-edge XANES for Pr0.67Sr0.33MnO3 under high pressure

The electronic excitation of 3$d$ transition metal oxide depends on the hybridization between orbitals of different ions, and is related to the materials properties. In this work, we systematically study the effect of hydrostatic pressure up to similar to ~20 GPa on the crystal structure and electronic structure of Pr 0.67 Sr 0.33 MnO 3 powder, using Mn $K$-edge X-ray absorption near edge structure and X-ray diffraction at room temperature. With the increase of pressure, the energy position of non-local screened feature moves towards feature without screening due to the enhanced transition energy; however, the intensity (probability) of non-local screened feature increases with the pressure. Further study suggests that the pressure-induced antiferromagnetic phase, affecting hybridization between neighboring Mn ions with spin sensitivity, increase the probability of non-local charge transfer and corresponding intensity of non-local screened feature. The spin-sensitivity of non-local screening may be a useful parameter for characterization of material properties.

36 MATERIALS SCIENCE↗

Phase evolution of conversion-type electrode for lithium ion batteries

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate-limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications.

25 ENERGY STORAGE↗

Nitrogen-coordinated single iron atom catalysts derived from metal organic frameworks for oxygen reduction reaction

Iron and nitrogen co-doped carbon (Fe-N-C) catalysts hold great promise to replace platinum group metal used for the oxygen reduction reaction (ORR) in low-temperature fuel cells. However, general synthesis routes require tedious acid washing and extensive heat treatment, usually resulting in uncontrollable morphologies and undesirable compounds. In this work, a zeolitic imidazolate framework (ZIF-8) was employed as a self-template for one-pot synthesis of a Fe-N-C catalyst consisting of uniformly dispersed Fe single atoms. Atomically dispersed Fe atoms were well distributed along the edges of the porous carbon matrix. Each of the Fe atoms was coordinated with four N atoms in the plane and two O atoms in the axial direction. The optimized Fe-N-C catalyst showed excellent ORR activities with half-wave potentials of 0.81 and 0.90 V in acidic and alkaline solutions, respectively. The results may be important for the optimization of single-atom-based catalysts for various reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-Scale Control of Magnetism at the Titanite-Manganite Interfaces

Complex oxide thin-film heterostructures often exhibit magnetic properties different from those known for bulk constituents. This is due to the altered local structural and electronic environment at the interfaces, which affects the exchange coupling and magnetic ordering. The emergent magnetism at oxide interfaces can be controlled by ferroelectric polarization and has a strong effect on spin-dependent transport properties of oxide heterostructures, including magnetic and ferroelectric tunnel junctions. In this work, using prototype La 2/3 Sr 1/3 MnO 3 /BaTiO 3 heterostructures, we show that ferroelectric polarization of BaTiO 3 controls the orbital hybridization and magnetism at heterointerfaces. We observe changes in the enhanced orbital occupancy and significant charge redistribution across the heterointerfaces, affecting the spin and orbital magnetic moments of the interfacial Mn and Ti atoms. Notably, we find that the exchange coupling between Mn and Ti atoms across the interface is tuned by ferroelectric polarization from ferromagnetic to antiferromagnetic. Our findings provide a viable route to electrically control complex magnetic configurations at artificial multiferroic interfaces, taking a step toward low-power spintronics.

36 MATERIALS SCIENCE↗

Methacrylated gelatin-embedded fabrication of 3D graphene-supported Co 3 O 4 nanoparticles for water splitting

In this work, we developed a general platform for the fabrication of transition metal oxide nanoparticles supported by a graphene foam (GF) by first coating it with a methacrylated gelatin (GelMA) hydrogel, which served as a 3D matrix for nanoparticle dispersion. The engineered GelMA/GF matrix was hydrophilic with good mechanical strength and high conductivity, therefore providing a good platform for the dispersion of a variety of metal/oxide precursors. Due to this platform, well-dispersed Co 3 O 4 nanoparticles with the smallest size of 3 nm assembled on the nitrogen-doped graphene foam (Co 3 O 4 /NGF). The crystalline transformation from a CoCl 2 [H 2 O] 2 precursor to Co 3 O 4 was revealed by in operando X-ray diffraction and absorption techniques. After applying Co 3 O 4 /NGF as a free-standing electrocatalyst for water splitting, the nanoparticles of size 3 nm exhibited optimal catalytic activity in alkaline media; the corresponding cell could promote water splitting at a current density of 10 mA cm -2 with only 1.63 V and exhibited excellent stability in a 25 h long-term operation. Our results demonstrate that the GelMA hydrogel-coated 3D graphene foam can be a promising platform for the design and fabrication of graphene-based multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗