Hybrid Electrochemical Hydrogen/Metal Hydride Compressor (Final Technical Report)
Various alternatives to traditional mechanical compressor systems have been considered, including MHC and EHC. Both MHCs and EHCs are solid-state systems that have no moving parts other than valves. Both are quiet and have low maintenance requirements. However, strength and material issues as well as water and heat management issues have challenged EHCs, especially, when operated at very high pressures. Similarly, low efficiency, especially, when staging is required to attain high, pressure ratios, has challenged MHCs and has made them too complex and expensive. Material degradation, due to hydrogen impurity effects, has also created issues for MHCs. One novel alternative evaluated here is to combine EHC and MHC technologies in a way to maximize their advantages and to minimize each of their challenges to improve the overall systems performance on a path to meet or exceed current DOE targets. A hybrid EH/MH compressor takes advantage of lower maintenance and operating costs as well as increased reliability associated with both the MHC and EHC technologies over traditional mechanical compressors. Neither the MHC nor the EHC have any moving parts other than valves. The hybrid system also takes advantage of the higher efficiency and lower cost of the EHC by operating at lower delivery pressures combined with the robust and simple operation of a single-stage, MH compressor at higher pressures. Both MHC and EHC technologies are scalable and can be used for a variety of hydrogen compression and delivery applications.