Engineering topics
Su, Meng
Publications and source records attributed to Su, Meng.
Controlled 3D nanoparticle deposition by drying of colloidal suspension in designed thin micro-porous architectures
Nanoparticle deposition by drying of colloidal suspension in thin micro-porous architectures has attracted a lot of attention in scientific research as well as industrial applications. However, the underlying mechanisms of such three-dimensional (3D) deposition are not yet fully revealed due to the complexity of the co-occurring processes of two-phase fluid flows, phase change and mass transport. Consequently, the control of 3D nanoparticle deposition remains a challenge. We use a combined experimental and numerical approach to achieve controlled 3D nanoparticle deposition by drying of colloidal suspension in two pillar-based thin micro-porous architectures. By the design of pillar layout, rectangular-spiral and circular-spiral deposition configurations are obtained globally. By varying the surface wettability, vertically symmetric and sloped nanoparticle depositions can be achieved locally. While the numerical modeling reveals the mechanisms of liquid internal flow, as well as the impact of local drying rate on nanoparticle transport, accumulation and final deposition, the experimental results of deposition configurations validate the controlling strategies. This combined experimental and numerical work provides a framework to achieve desired 3D nanoparticle deposition in thin micro-porous architectures, with a thorough understanding of the underlying mechanisms of two-phase fluid flows, phase change and mass transport.
A strong test of the dark matter origin of a TeV electron excess using icecube neutrinos
Due to the electroweak symmetry, high energy neutrinos and charged leptons are generically produced simultaneously in heavy dark matter decay or annihilation process. Correlating these two channels in dark matter indirect detections may provide important information on the intrinsic production mechanism. In this paper, we demonstrate this point by studying the tentative excess in the electron spectrum at 1.4 TeV reported by the DArk Matter Particle Explorer (DAMPE). A non-astrophysical scenario in which dark matter particles annihilate or decay in a local clump has been invoked to explain the excess. If e± annihilation channels in the final states are mediated by left-handed leptons as a component in the SU(2) L doublet, neutrinos with similar energies should have been simultaneously produced. Here we demonstrate that generic dark matter models can be decisively tested by the existing IceCube data. In case of a non-detection, such models would be excluded at the 5σ level by the five-year data for a point-like source and by the ten-year data for an extended source of dark matter particles with left-handed leptons. This serves as an example of the importance of correlating charged lepton and neutrino channels. It would be fruitful to conduct similar studies related to other approaches to the indirect detection of dark matter.
Fermi bubbles inflated by winds launched from the hot accretion flow in Sgr A*
A pair of giant gamma-ray Bubbles has been revealed by Fermi-LAT. In this paper we investigate their formation mechanism. Observations have indicated that the activity of the supermassive black hole located at the Galactic center, Sgr A*, was much stronger than at the present time. Specifically, one possibility is that while Sgr A* was also in the hot accretion regime, the accretion rate should be 10{sup 3}-10{sup 4} times higher during the past ∼10{sup 7} yr. On the other hand, recent magnetohydrodynamic numerical simulations of hot accretion flows have unambiguously shown the existence and obtained the properties of strong winds. Based on this knowledge, by performing three-dimensional hydrodynamical simulations, we show in this paper that the Fermi Bubbles could be inflated by winds launched from the 'past' hot accretion flow in Sgr A*. In our model, the active phase of Sgr A* is required to last for about 10 million years and it was quenched no more than 0.2 million years ago. The central molecular zone (CMZ) is included and it collimates the wind orientation toward the Galactic poles. Viscosity suppresses the Rayleigh-Taylor and Kelvin-Helmholtz instabilities and results in the smoothness of the Bubbles edge. The main observational features of the Bubbles can be well explained. Specifically, the ROSAT X-ray features are interpreted by the shocked interstellar medium and the interaction region between the wind and CMZ gas. The thermal pressure and temperature obtained in our model are consistent with recent Suzaku observations.
An analytical model of the large neutral regions during the late stage of reionization
In this paper, we investigate the nature and distribution of large neutral regions during the late epoch of reionization. In the 'bubble model' of reionization, the mass distribution of large ionized regions ('bubbles') during the early stage of reionization is obtained by using the excursion set model, where the ionization of a region corresponds to the first up-crossing of a barrier by random trajectories. We generalize this idea and develop a method to predict the distribution of large-scale neutral regions during the late stage of reionization, taking into account the ionizing background after the percolation of H II regions. The large-scale neutral regions, which we call 'neutral islands', are not individual galaxies or minihalos, but larger regions where fewer galaxies formed and hence ionized later and they are identified in the excursion set model with the first down-crossings of the island barrier. Assuming that the consumption rate of ionizing background photons is proportional to the surface area of the neutral islands, we obtained the size distribution of the neutral islands. We also take the 'bubbles-in-island' effect into account by considering the conditional probability of up-crossing a bubble barrier after down-crossing the island barrier. We find that this effect is very important. An additional barrier is set to avoid islands being percolated through. We find that there is a characteristic scale for the neutral islands, while the small islands are rapidly swallowed up by the ionizing background; this characteristic scale does not change much as the reionization proceeds.
Dichromatic dark matter
Both the robust INTEGRAL 511 keV gamma-ray line and the recent tentative hint of the 135 GeV gamma-ray line from Fermi-LAT have similar signal morphologies, and may be produced from the same dark matter annihilation. Motivated by this observation, we construct a dark matter model to explain both signals and to accommodate the two required annihilation cross sections that are different by more than six orders of magnitude. In our model, to generate the low-energy positrons for INTEGRAL, dark matter particles annihilate into a complex scalar that couples to photon via a charge-radius operator. The complex scalar contains an excited state decaying into the ground state plus an off-shell photon to generate a pair of positron and electron. Two charged particles with non-degenerate masses are necessary for generating this charge-radius operator. One charged particle is predicted to be long-lived and have a mass around 3.8 TeV to explain the dark matter thermal relic abundance from its late decay. The other charged particle is predicted to have a mass below 1 TeV given the ratio of the two signal cross sections. The 14 TeV LHC will concretely test the main parameter space of this lighter charged particle.