Engineering Papers⌕ Search

Engineering topics

Stofan, Ellen R.

Publications and source records attributed to Stofan, Ellen R..

At least 19 records

Corrigendum to "New Approaches to Inferences for Steep-Sided Domes on Venus" [J. Volcanol. Geotherm. Res. 319 (2016) 93-105]

A typographical error contained in Quick et al. (2016) indicates the incorrect units for the value of the combined quantity (roh(exp. 3)o) that is the basis of Figs. 5, 6, and 7, and Tables 2 and 3. Using the values of ro and ho provided in Table 2, it can easily be shown that the combined quantity is correctly stated as roh(exp. 3)o =0.617 km(exp. 4). As correctly stated in Quick et al. (2016), the combined quantity of (roh(exp. 3)o) determines the family of curves shown in Fig. 5. The derivation of this relationship is shown below for completeness. Note that all results as reported in Quick et al. (2016) remained unchanged.

Quick, Lynnae C.↗

Volatile Transport by Volcanic Plumes on Earth, Venus and Mars

Explosive volcanic eruptions can produce sustained, buoyant columns of ash and gas in the atmosphere (Fig. 1). Large flood basalt eruptions may also include significant explosive phases that generate eruption columns. Such eruptions can transport volcanic volatiles to great heights in the atmosphere. Volcanic eruption columns can also redistribute chemical species within the atmosphere by entraining ambient atmosphere at low altitudes and releasing those species at much higher altitudes.

Glaze, Lori S.↗

Emplacement Scenarios for Volcanic Domes on Venus

One key to understanding the history of resurfacing on Venus is better constraints on the emplacement timescales for the range of volcanic features visible on the surface. A figure shows a Magellan radar image and topography for a putative lava dome on Venus. 175 such domes have been identified with diameters ranging from 19 - 94 km, and estimated thicknesses as great as 4 km. These domes are thought to be volcanic in origin and to have formed by the flow of viscous fluid (i.e., lava) on the surface.

Glaze, Lori S.↗

Geologic Mapping of the Guinevere Planitia Quadrangle of Venus

The Guinevere Planitia quadrangle of Venus (0-25degN, 300-330deg) covers a lowland region east of Beta Regio and west of Eistla Regio, including parts of Guinevere and Undine Planitiae. The V-30 quadrangle is dominated by low-lying plains interpreted to be of volcanic origin and exhibiting numerous wrinkle ridges. Using Pioneer Venus, Goldstone, and Arecibo data, previous investigators have described radar bright, dark, and mottled plains units in the Guinevere Planitia region, as well as arcuate fracture zones and lineament belt segments that define the Beta-Eistla deformation zone [1-5]. Magellan SAR images show that volcanic landforms compose the majority of the surface units in V-30 [6-7]. The quadrangle contains parts of four major volcanoes: Atanua (9degN, 307deg), Rhpisunt (3degN, 302deg), Tuli (13degN, 314deg), and Var (3degN, 316deg) Montes, and three coronae: Hulda (12degN, 308deg), Madderakka (9degN, 316deg), and Poloznitsa (1degN, 303deg). Seymour crater, located at 18degN, 327deg, is associated with extensive crater outflow deposits.

Crown, David A.↗

A New Approach to Inferences for Pancake Domes on Venus

Figure 1 shows a radar image and topography for flat-topped, steep-sided "pancake" domes on Venus. At least 145 such domes have been identified on Venus [I] and are thought to be volcanic in origin [2]. Based on analysis of the dome surfaces, [3] suggested that only the late stage surface fractures are preserved, indicating entrainment and annealing of fractures during emplacement, consistent with a basaltic composition. Figure 1 shows a radar image and topography for flat-topped, steep-sided "pancake" domes on Venus. At least 145 such domes have been identified on Venus [I] and are thought to be volcanic in origin [2]. Based on analysis of the dome surfaces, [3] suggested that only the late stage surface fractures are preserved, indicating entrainment and annealing of fractures during emplacement, consistent with a basaltic composition.

Glaze, Lori S.↗

Studies of Coronae and Large Volcanoes on Venus: Constraining the Diverse Outcomes of Small-Scale Mantle Upwellings on Venus

Proxemy Research had a grant from NASA to perform science research on upwelling and volcanism on Venus. This was a 3 year Planetary Geology and Geophysics grant to E. Stofan, entitled Coronae and Large volcanoes on Venus. This grant closes on 12/31/05. Here we summarize the scientific progress and accomplishments of this grant. Scientific publications and abstracts of presentations are indicated in the final section. This was a very productive grant and the progress that was made is summarized. Attention is drawn to the publications and abstracts published in each year. The proposal consisted of two tasks, one examining coronae and one studying large volcanoes. The corona task (Task 1) consisted of three parts: 1) a statistical study of the updated corona population, with Sue Smrekar, Lori Glaze, Paula Martin and Steve Baloga; 2) geologic analysis of several specific groups of coronae, with Sue Smrekar and others; and 3) determining the histories and significance of a number of coronae with extreme amounts of volcanism, with Sue Smrekar. Task 2, studies of large volcanoes, consisted of two subtasks. In the first, we studied the geologic history of several volcanoes, with John Guest, Peter Grindrod, Antony Brian and Steve Anderson. In the second subtask, I analyzed a number of Venusian volcanoes with evidence of summit diking along with Peter Grindrod and Francis Nimmo.

Stofan, Ellen R.↗

Impact Craters on Titan? Cassini RADAR View

Titan is a planet-size (diameter of 5,150 km) satellite of Saturn that is currently being investigated by the Cassini spacecraft. Thus far only one flyby (Oct. 26, 2004; Ta) has occurred when radar images were obtained. In February, 2005, and approximately 20 more times in the next four years, additional radar swaths will be acquired. Each full swath images about 1% of Titan s surface at 13.78 GHz (Ku-band) with a maximum resolution of 400 m. The Ta radar pass [1] demonstrated that Titan has a solid surface with multiple types of landforms. However, there is no compelling detection of impact craters in this first radar swath. Dione, Tethys and other satellites of Saturn are intensely cratered, there is no way that Titan could have escaped a similar impact cratering past; thus there must be ongoing dynamic surface processes that erase impact craters (and other landforms) on Titan. The surface of Titan must be very young and the resurfacing rate must be significantly higher than the impact cratering rate.

Wood, Charles A.↗

Proxemy Research Grant NAG5-10263 Closeout Report

Proxemy Research had a grant from NASA to perform science research of upwelling and volcanism on Venus. This was a 5 year Presidential Early Career Award to E. Stofan, entitled "Upwelling and volcanism: Constraints from regional studies and geologic mapping." Here we summarize the scientific progress and accomplishments of this grant. Scientific publications and abstracts of presentations are indicated in the final section. This was a very productive grant and the progress that was made is summarized. Attention is drawn to the publications, abstracts, and talks given in each year. Volcanism and tectonism are the dominant geological processes that have shaped the surface of Venus, as revealed by the Magellan data. However, the development of a global geologic history for Venus has caused considerable debate (e.g., Head and Basilevsky, 1996; Guest and Stofan, 1999). The lack of global time horizons on Venus, such as that provided by impact craters on most bodies and the fossil record on Earth, make developing global stratigraphies for Venus difficult, if not impossible, with current datasets. Before the geologic history of Venus can be determined and used as a constraint on potential lithospheric thickness variations through time, it is necessary to perform detailed stratigraphic studies on a local to regional scale. In addition, detailed studies of specific types of venusian features and terrains, such as coronae, volcanic rises, and large lava flow fields, may help to constrain the lithospheric thickness and its potential variations in time and space. This report describes progress made during the five year award under a Presidential Early Career Award for Scientists and Engineers which allows researchers freedom to explore new areas of research.

Stofan, Ellen R.↗

Corona Formation and Heat Loss on Venus by Coupled Upwelling and Delamination

Coronae are volcanotectonic features that are unique to Venus and are interpreted to be small-scale upwellings. A model in which upwelling causes delamination at the edge of the plume head, along with deformation of a pre-existing depleted mantel Layer, can produce the full range of topographic forms of coronae. If half of the coronae are active, delamination of the lower lithosphere could account for about 10% of venus's heat loss, with another 15% due to upwelling. Delamination may occur in other geologic enviroment and could help account for 'Venus' heat loss 'deficit'.

Corona Formation Venus↗

Large Volcanic Rises on Venus

Large volcanic rises on Venus have been interpreted as hotspots, or the surface manifestation of mantle upwelling, on the basis of their broad topographic rises, abundant volcanism, and large positive gravity anomalies. Hotspots offer an important opportunity to study the behavior of the lithosphere in response to mantle forces. In addition to the four previously known hotspots, Atla, Bell, Beta, and western Eistla Regiones, five new probable hotspots, Dione, central Eistla, eastern Eistla, Imdr, and Themis, have been identified in the Magellan radar, gravity and topography data. These nine regions exhibit a wider range of volcano-tectonic characteristics than previously recognized for venusian hotspots, and have been classified as rift-dominated (Atla, Beta), coronae-dominated (central and eastern Eistla, Themis), or volcano-dominated (Bell, Dione, western Eistla, Imdr). The apparent depths of compensation for these regions ranges from 65 to 260 km. New estimates of the elastic thickness, using the 90 deg and order spherical harmonic field, are 15-40 km at Bell Regio, and 25 km at western Eistla Regio. Phillips et al. find a value of 30 km at Atla Regio. Numerous models of lithospheric and mantle behavior have been proposed to interpret the gravity and topography signature of the hotspots, with most studies focusing on Atla or Beta Regiones. Convective models with Earth-like parameters result in estimates of the thickness of the thermal lithosphere of approximately 100 km. Models of stagnant lid convection or thermal thinning infer the thickness of the thermal lithosphere to be 300 km or more. Without additional constraints, any of the model fits are equally valid. The thinner thermal lithosphere estimates are most consistent with the volcanic and tectonic characteristics of the hotspots. Estimates of the thermal gradient based on estimates of the elastic thickness also support a relatively thin lithosphere (Phillips et al.). The advantage of larger estimates of the thermal lithospheric thickness is that they provide an explanation for the apparently modest levels of geologic activity on Venus over the last half billion years.

Smrekar, Suzanne E.↗

Large Topographic Rises on Venus: Implications for Mantle Upwelling

Topographic rises on Venus have been identified that are interpreted to be the surface manifestation of mantle upwellings. These features are classified into groups based on their dominant morphology. Atla and Beta Regiones are classified as rift-dominated, Dione, western Eistla, Bell, and Imdr Regiones as volcano-dominated, and Themis, eastern Eistla, and central Eistla Regiones as corona-dominated. At several topographic rises, geologic indicators were identified that may provide evidence of uplifted topography (e.g., volcanic flow features trending upslope). We assessed the minimum contribution of volcanic construction to the topography of each rise, which in general represents less than 5% of the volume of the rise, similar to the volumes of edifices at terrestrial hotspot swells. The total melt volume at each rise is approximated to be 10(exp 4) - 10(exp 6) cu km. The variations in morphology, topography, and gravity signatures at topographic rises are not interpreted to indicate variations in stage of evolution of a mantle upwelling. Instead, the morphologic variations between the three classes of topographic rises are interpreted to indicate the varying influences of lithospheric structure, plume characteristics, and regional tectonic environment. Within each class, variations in topography, gravity, and amount of volcanism may be indicative of differing stages of evolution. The similarity between swell and volcanic volumes for terrestrial and Venusian hotspots implies comparable time-integrated plume strengths for individual upwellings on the two planets.

Stofan, Ellen R.↗

The unique radar scattering properties of silicic lava flows and domes

Silicic (silica-rich) lava flows, such as rhyolite, rhyodacite, and dacite, possess unique physical properties primarily because of the relatively high viscosity of the molten lava. Silicic flows tend to be thicker than basaltic flows, and the resulting large-scale morphology is typically a steep-sided dome or flow lobe, with aspect ratios (height/length) sometimes approaching unity. The upper surfaces of silicic domes and flows are normally emplaced as relatively cool, brittle slabs that fracture as they are extruded from the central vent areas, and are then rafted away toward the flow margin as a brittle carapace above a more ductile interior layer. This mode of emplacement results in a surface with unique roughness characteristics, which can be well-characterized by multiparameter synthetic aperture radar (SAR) observations. In this paper, we examine the scattering properties of several silicic domes in the Inyo volcanic chain in the Eastern Sierra of California, using AIRSAR and TOPSAR data. Field measurements of intermediate-scale (cm to tens of m) surface topography and block size are used to assess the mechanisms of the scattering process, and to quantify the unique roughness characteristics of the flow surfaces.

Plaut, Jeffrey J.↗

Spatial and temporal relations between coronae and extensional belts, northern Lada Terra, Venus

Preliminary studies of the distribution of coronae and volcanic rises on Venus show that many of these features tend to cluster along zones of rifting and extension. The plains north of Lada Terra are crossed by two such extensional belts. Each belt is composed of grabens, ridges, faults, volcanic flows, coronae and coronalike features. The longer and more prominent belt is the NW trending Alpha-Lada extensional belt, which is over 6000 km long and 50-200 km wide, and includes the coronae Eve, Tamfana, Carpo, Selu, Derceto, Otygen, and an unnamed corona south of Otygen. The second belt is the NNE trending Derceto-Quetzalpetlatl extensional belt, which is about 2000 km long and in places over 300 km wide, and includes the coronae Sarpanitum, Eithinoha, and Quetzalpetlatl. The two belts intersect at the 1600 x 600 km wide Derceto volcanic plateau. It is apparent that deformation along the two belts overlapped in time, though deformation along the Alpha-Lada extensional belt probably continued after the deformation along the Derceto-Quetzalpetlatl extensional belt terminated. In certain areas, volcanism originated in grabens within the extensional belts, whereas in other areas, such as in Eve, Selu, Derceto, and Quetzalpetlatl, volcanism originated in the coronae and flowed into the lower parts of the extensional belts. Regional extension has affected the evolution of all the coronae at some stage of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha and after the initiation of Carpo, Tamfana, Otygen, and Sarpanitum. It is thus unlikely that coronae formation along the belts is solely a consequence of the regional extension, and it is also unlikely that regional extension has been caused solely by the coronae. No corona along the belts was formed subsequent to the cessation of the regional extension. We therefore suggest that the regional extension and the coronae are interrelated. Some of the coronae may have determined the location of the surface expression of the regional extension, whereas the locations of other coronae may have been influenced by the concentration of regional extensional stresses.

Baer, Gidon↗

The spatial distribution of coronae and related features on Venus

Coronae are large quasi-circular geologica features that are common on Venus. They appear to be the surface tectonic and volcanic expressions of mantle diapirs that have impinged on the underside of the venusian lithosphere. We have investigated the spatial distribution of 335 coronae and related features identified in Magellan radar data. It is more clustered than a Poisson distribution, with a statistical certainty of more than 99%. It is dominated by a single large cluster centered near the equator at about 245 deg longitude. The features are preferentially found at elevation and geoid values close to the planetary mean, with a paucity at both the highest and lowest levels of topgraphy and geoid. Some coronae appear aligned in quasi-linear chains. We attribute the clustering of coronae and related features to preferential formation of these features above regions of broad-scale mantle upwelling, and suggest that a major mantle upwelling underlies the one large cluster. We suggest that coronae are rare at the lowest elevations because these may be regions of mantle downwelling. The shortage of coronae at the highest elevations may result both from obscuration by other intense tectonism there and from suppression there of their formation by an unusually thick crust. Corona chains may be produced by enhanced passive mantle uplift below failed or incipient rifts.

Squyres, Steven W.↗

Guide to Magellan image interpretation

An overview of Magellan Mission requirements, radar system characteristics, and methods of data collection is followed by a description of the image data, mosaic formats, areal coverage, resolution, and pixel DN-to-dB conversion. The availability and sources of image data are outlined. Applications of the altimeter data to estimate relief, Fresnel reflectivity, and surface slope, and the radiometer data to derive microwave emissivity are summarized and illustrated in conjunction with corresponding SAR image data. Same-side and opposite-side stereo images provide examples of parallax differences from which to measure relief with a lateral resolution many times greater than that of the altimeter. Basic radar interactions with geologic surfaces are discussed with respect to radar-imaging geometry, surface roughness, backscatter modeling, and dielectric constant. Techniques are described for interpreting the geomorphology and surface properties of surficial features, impact craters, tectonically deformed terrain, and volcanic landforms. The morphologic characteristics that distinguish impact craters from volcanic craters are defined. Criteria for discriminating extensional and compressional origins of tectonic features are discussed. Volcanic edifices, constructs, and lava channels are readily identified from their radar outlines in images. Geologic map units are identified on the basis of surface texture, image brightness, pattern, and morphology. Superposition, cross-cutting relations, and areal distribution of the units serve to elucidate the geologic history.

Ford, John P.↗