Engineering Papers⌕ Search

Engineering topics

Stoeffler, D.

Publications and source records attributed to Stoeffler, D..

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Investigating a 65-Ma-Old Smoking Gun: Deep Drilling of the Chicxulub Impact Structure

The Phanerozoic paleontological record is marked by several biological extinction events. One of them,at the Cretaceous/Tertiary (K/T) boundary was responsible for the demise of about 50% of genera and 75% of species, including the dinosaurs.These drastic and abrupt changes in the development of life on Earth puzzled paleontologists in the past. Many a cause was put forward to account for them, amongst them climate changes, disease, or overspecialization.

Dressler, B.↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Summary of results - an updated impact model

In 1984 the Ontario Geological Survey initiated a research project on the Sudbury structure (SS) in cooperation with the University of Muenster. The project included field mapping (1984-1989) and petrographic, chemical, and isotope analyses of the major stratigraphic units of the SS. Four diploma theses and four doctoral theses were performed during the project (1984-1992). Specific results of the various investigations are reported. Selected areas of the SS were mapped and sampled: Footwall rocks; Footwall breccia and parts of the sublayer and lower section of the Sudbury Igneous Complex (SIC); Onaping Formation and the upper section of the SIC; and Sudbury breccia and adjacent Footwall rocks along extended profiles up to 55 km from the SIC. All these stratigraphic units of the SS were studied in substantial detail by previous workers. The most important characteristic of the previous research is that it was based either on a volcanic model or on a mixed volcanic-impact model for the origin of the SS. The present project was clearly directed toward a test of the impact origin of the SS without invoking an endogenic component. In general, our results confirm the most widely accepted stratigraphic division of the SS. However, our interpretation of some of the major stratigraphic units is different from most views expressed. The stratigraphy of the SS and its new interpretation is given as a basis for discussion.

Avermann, M.↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Petrology, chemistry, and origin of breccia formations

Within the Sudbury Project of the University of Muenster and the Ontario Geological Survey special emphasis was put on the breccia formations exposed at the Sudbury structure (SS) because of their crucial role for the impact hypothesis. They were mapped and sampled in selected areas of the north, east, and south ranges of the SS. The relative stratigraphic positions of these units are summarized. Selected samples were analyzed by optical microscopy, SEM, microprobe, XRF and INAA, Rb-Sr and SM-Nd-isotope geochemistry, and carbon isotope analysis. The results of petrographic and chemical analysis for those stratigraphic units that were considered the main structural elements of a large impact basin are summarized.

Stoeffler, D.↗
NASA NTRS1989

Modifications of comet materials by the sublimation process: Results from simulation experiments

An active comet like comet Halley loses by sublimation a surface layer of the order of 1 m thickness per perihelion passage. In situ measurements show that water ice is the main constituent which contributes to the gas emission although even more volatile species (CO, NH3, CH4, CO2 etc.) have been identified. Dust particles which were embedded in the ices are carried by the sublimating gases. Measurements of the chemical composition of cometary grains indicate that they are composed of silicates of approximate chondritic composition and refractory carbonaceous material. Comet simulation experiments show that significant modifications of cometary materials occur due to sublimation process in near surface layers which have to be taken into account in order to derive the original state of the material.

Gruen, E.↗
NASA NTRS1989

Methods for the mineralogical and textural analysis of comet nucleus samples

The objectives and instrumental requirements of a petrographic analysis of porous comet nucleus material are reviewed. Assumptions about its composition and texture, and the available techniques for the microscopic analysis of comet analogue material are investigated. New techniques required for the petrographic investigation of natural and artificial comet nucleus samples are also considered.

Stoeffler, D.↗
NASA NTRS1988

Shock effects in meteorites

The impacts that can occur between objects on intersecting solar system orbits can generate shock-induced deformations and transformations, creating new mineral phases or melting old ones. These shock-metamorphic effects affect not only the petrography but the chemical and isotopic properties and the ages of primordial meteoritic materials. A fuller understanding of shock metamorphism and breccia formation in meteorites will be essential not only in the study of early accretion, differentiation, and regolith-evolution processes, but in the characterization of the primordial composition of the accreted material itself.

Stoeffler, D.↗
NASA NTRS1986

Shock metamorphism and petrography of the Shergotty achondrite

The shock history of the Shergotty meteorite has been evaluated by analyzing the observable shock effects. In addition, the results of petrographic and mineralogical analyses of new Shergotty subsamples are presented. The overall modal composition of these subsamples is similar to that of the other Shergotty samples, except for the rather high whitlockite content. The shock effects observed in the mineral constituents include mosaicism, deformation bands, planar fractures, and mechanical twin lamellae in clinopyroxene; isotropization of plagioclase with very rare remnants of birefringence; and planar deformation structures, mosaicism, and strongly reduced birefringence in quartz. Other shock effects include mechanical twinning of ilmenite, and localized in situ melting of neighboring minerals at the contact of low and high density phases. The observed shock effects could be explained by a single shock event.

Stoeffler, D.↗
NASA NTRS1984

Glasses formed by hypervelocity impact

This paper presents description, classification, and geological setting of impact glasses, which are formed as a result of meteorite impacts with the planetary surface, and discusses the impact-glass formation process in the context of cratering mechanics. Impact glasses can be classified as belonging to two major groups: (1) mineral glasses, which are identical in composition to a mineral, and (2) rock glasses, which have the composition of a rock or a mixture of various rocks. Rock glasses may be (1) melt ejecta, (2) parts of a coherent melt layer inside the crater cavity, or (3) dikes or veins. The composition of rock glasses at a particular crater can be matched by that of the target. In nonporous rocks, the formation of rock glasses requires peak pressures in excess of 60-80 GPa, while mineral glasses are formed in the pressure range of about 25 to 55 GPa; in porous rocks, interstitial glass forms at pressures as low as 5 GPa.

Stoeffler, D.↗
NASA NTRS1983

Lithification opf gas-rich chondrite regolith breccias by grain boundary and localized shock melting

The fine-grained matrices (less than 150 microns) of 14 gas-rich ordinary chondrile regolith breccias were studied in an attempt to decipher the nature of the lithification process that converted loose regolith material into consolidated breccias. It is found that there is a continuouos gradation in matrix textures from nearly completely clastic (class A) to highly cemented (class C) breccias in which the remining clasts are completely surrounded by interstitial, shock-melted material. It is concluded that this interstitial material is formed by shock melting in the porous regolith. In general, the abundances of solar-wind-implanted He-4 and Ne-20 are inversely correlated with the abundance of intenstitial, shock-melted, feldspathic material. Chondrites with the highest abundance of interstitial, melted material (class C) experienced the highest shock pressures and temperatures and suffered the most extensive degassing. It is this interstitial, feldspathic melt that lithifies and cements the breccias together; those breccias with very little interstitial melt (class A) are the most porous and least consolidated.

Bischoff, A.↗
NASA NTRS1982

Distribution and provenance of lunar highland rock types at North Ray Crater, Apollo 16

In connection with its selenographic setting in the central lunar highlands, the Apollo 16 landing site in the Descartes area is highly important as a prime sampling area for rocks which formed as part of the primordial crust and as a key location for the analysis of the deformation and transport of crustal material by impact processes. The present investigation is concerned with the North Ray crater, which is located on the N-S running boundary between the smooth Cayley plains to the west and the Descartes mountains to the east. Attention is given to aspects of selenography and location of samples, the ejecta distribution of post-Cayley impact craters, sample classification, the frequency distribution of rock types in the North Ray Crater ejecta, an interpretation of compositional and age data, a model of the target stratigraphy and excavation of North Ray Crater, and implications for the emplacement and provenance of North Ray target rocks.

Stoeffler, D.↗
NASA NTRS1975

Experimental hypervelocity impact into quartz sand - Distribution and shock metamorphism of ejecta

Results are presented for vertical impacts of 0.3-g cylindrical plastic projectiles into noncohesive quartz sand in which vertical and horizontal reference strate were employed by using layers of colored sand. The impacts were performed at velocities of 5.9-6.9 km/sec with a vertical gun ballistic range. The craters, 30-33 cm in diameter, reveal a radial decay of the ejecta mass per unit area with a power of -2.8 to -3.5. Material displaced from the upper 15% of the crater depth d is represented within the whole ejecta blanked, material from deeper than 28% of d is deposited inside 2 crater radii, and no material from deeper than 33% of d was ejected beyond the crater rim. Shock-metamorphosed particles (glassy agglutinates, cataclastic breccias, and comminuted quartz) amount to some 4% of the total displaced mass and indicate progressive zones of decay of shock intensity from a peak pressure of 300 kbar. The shock-metamorphosed particles and the shock-induced change in the grain size distribution of ejected samples have close analogies to the basic characteristics of the lunar regolith. Possible applications to regolith formation and to ejecta formations of large-scale impact craters are discussed.

Stoeffler, D.↗
NASA NTRS1974

The Kelly chondrite - A parent body surface metabreccia

A study of the Kelly chondrite classes it as a monomict breccia rather than a polymict breccia as it was originally described. Microprobe analyses of differently textured clasts are very similar to each other and to well-known LL-type chondrites. Clast and matrix olivine compositions are well within the range of LL-chondrite olivine. A correlation is found between the degree of recrystallization and plagioclase composition. Petrographic observations of shocked, annealed, and unshocked clasts coupled with particle size distribution measurements indicate strongly that Kelly is similar to lunar metabreccias in mode of formation. It is theorized that Kelly is an LL-chondrite parent body metabreccia representing the final accumulation phase of the parent body.

Bunch, T. E.↗
NASA NTRS1972

Quartz and feldspar glasses produced by natural and experimental shock.

Refractive index, density, and infrared absorption studies of naturally and experimentally shocked-produced glasses formed from quartz, plagioclase, and alkali-feldspar confirm the existence of two main groups of amorphous forms of the framework silicates: solid-state and liquid-state glasses. These were apparently formed as metastable release products of high-pressure-phases above and below the glass transition temperatures. Solid-state glasses exhibit a series of structural states with increasing disorder caused by increasing shock pressures and temperatures. They gradually merge into the structural state of fused minerals similar to that of synthetic glasses quenched from a melt. Shock-fused alkali feldspars can, however, be distinguished from their laboratory-fused counterparts by infrared absorption and by higher density.

Stoeffler, D.↗