Engineering Papers⌕ Search

Engineering topics

Stockdale, John R.

Publications and source records attributed to Stockdale, John R..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Boron‐polymer composites engineered for compression molding, foaming, and additive manufacturing

Abstract Boron (specifically 10 B) is the element of choice to shield thermal neutrons due to its large (n, α) cross‐section; however, very few polymer composites containing high boron concentrations are available. This study aimed to determine the maximum possible amount of boron that could be introduced into a polymer matrix. Diverse manufacturing techniques, ranging from additive manufacturing to compression molding, were employed to fabricate inks and filaments for 3D printing, foams, and flexible pads. Composites using siloxanes, poly(lactic acid), and acrylonitrile butadiene styrene containing up to 80 wt% boron were sucessufully fabricated. The addition of known plasticizers (polyethylene glycol) and reinforcing agents (carbon nanofibers and fumed silica) helped to overcome fabrication problems such as clogging of the printing nozzle or crumbling of compression molded parts. In addition, the thermal‐mechanical properties of these novel boron composites were determined and shown to vary according to boron concentration, presence of additives, and fabrication techniques utilized.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Balancing Functionality and Printability: High-Loading Polymer Resins for Direct Ink Writing

Although direct ink writing (DIW) allows the rapid fabrication of unique 3D printed objects, the resins—or “inks”—available for this technique are in short supply and often offer little functionality, leading to the development of new, custom inks. However, when creating new inks, the ability of the ink to lead to a successful print, or the “printability,” must be considered. Thus, this work examined the effect of filler composition/concentration, printing parameters, and lattice structure on the printability of new polysiloxane inks incorporating high concentrations (50–70 wt%) of metallic and ceramic fillers as well as emulsions. Results suggest that strut diameter and spacing ratio have the most influence on the printability of DIW materials and that the printability of silica- and metal-filled inks is more predictable than ceramic-filled inks. Additionally, higher filler loadings and SC geometries led to stiffer printed parts than lower loadings and FCT geometries, and metal-filled inks were more thermally stable than ceramic-filled inks. The findings in this work provide important insights into the tradeoffs associated with the development of unique and/or multifunctional DIW inks, printability, and the final material’s performance.

36 MATERIALS SCIENCE↗