Engineering Papers⌕ Search

Engineering topics

Stewart, David A.

Publications and source records attributed to Stewart, David A..

28 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Convective heat-transfer rate distributions over a 140 deg blunt cone at hypersonic speeds in different gas environments

Experiments were conducted in air, CO2, and CO2-argon gas mixtures to obtain heating distribution data over a 140 deg blunt cone with various corner radii. The effect of corner radius on the heating distribution over the forebody of the cone was included in the investigation. These experiments provide data for validation of two-dimensional axisymmetric and three-dimensional Navier-Stokes solutions. Heating distribution data and measured bow shock wave stand-off distances for 0 deg angle of attack were compared with predicted values using a two-dimensional axisymmetric Navier-Stokes code.

Stewart, David A.↗
NASA NTRS1991

Effect of non-equilibrium flow chemistry and surface catalysis on surface heating to AFE

The effect of nonequilibrium flow chemistry on the surface temperature distribution over the forebody heat shield on the Aeroassisted Flight Experiment (AFE) vehicle was investigated using a reacting boundary-layer code. Computations were performed by using boundary-layer-edge properties determined from global iterations between the boundary-layer code and flow field solutions from a viscous shock layer (VSL) and a full Navier-Stokes solution. Surface temperature distribution over the AFE heat shield was calculated for two flight conditions during a nominal AFE trajectory. This study indicates that the surface temperature distribution is sensitive to the nonequilibrium chemistry in the shock layer. Heating distributions over the AFE forebody calculated using nonequilibrium edge properties were similar to values calculated using the VSL program.

Stewart, David A.↗
NASA NTRS1990

Response Of Ceramic Insulation To Aerothermodynamic Heating

Thermal conductivities determined from engineering model used to predict accurately thermal responses of multicomponent insulation on spacecraft. Types of insulation studied include such composite parts as alumina-enhanced thermal barrier backed by low-density fibrous refractory material. Internal responses of various types of multicomponent insulation to aerothermodynamic heating calculated with help of computer program that implements engineering model for thermal conductivity. Transfer of heat by internal radiation plays major role in responses of fibrous materials at high temperatures and incorporated into model and program. Used in future spacecraft and exposed during reentry and aerobraking maneuvers in outer atmosphere to environments even harsher than that of Space Shuttle.

Stewart, David A.↗
NASA NTRS1988

Wall catalysis experiment on AFE

This paper describes the wall catalysis experiment which is planned as part of the Aeroassist Flight experiments (AFE) that will be flown from the Space Shuttle Orbiter in late 1993. Research on candidate high-catalytic efficiency overcoats for the experiment conducted in an arc-jet air stream are discussed. The temperature distribution over the AFE heat shield is also predicted using a reacting boundary layer solution that includes surface kinetics and optical properties determined from these tests.

Stewart, David A.↗
NASA NTRS1988

Effect of surface catalysis on heating to ceramic coated thermal protection systems for transatmospheric vehicles

This paper describes the effect of surface catalysis on the heat transfer rate to the heat shield of a typical Transatmospheric Vehicle (TAV) during ascent and atmospheric entry. Surface kinetics and optical properties obtained from arc-jet tests on candidate thermal protection systems (coated metals) were used in a reacting boundary layer code to estimate the heating distribution along the surface of a TAV. Thermochemical stability of the coatings is described in terms of reduction in emittance and loss of opacifiers from the coatings during the arc-jet tests.

Stewart, David A.↗
NASA NTRS1988

Heating Distributions For Aeroassisted Vehicles

Report discusses anticipated distributions of temperature on symmetric and asymmetric large-angle blunt nose-cone space vehicles re-entering atmosphere. Report considers three cone angles; 100 degree, 120 degree, and 140 degree. Experimental surface-temperature data obtained on specimens made of thermal-protection materials proposed for vehicles. Discusses relationship between stagnation-point heat-transfer rate and bow-shock standoff distance for cones.

Stewart, David A.↗
NASA NTRS1988

Thermal Response Of Composite Insulation

Engineering model gives useful predictions. Pair of reports presents theoretical and experimental analyses of thermal responses of multiple-component, lightweight, porous, ceramic insulators. Particular materials examined destined for use in Space Shuttle thermal protection system, test methods and heat-transfer theory useful to chemical, metallurgical, and ceramic engineers needing to calculate transient thermal responses of refractory composites.

Stewart, David A.↗
NASA NTRS1987

Thermal response of integral multicomponent composites to a high-energy aerothermodynamic heating environment with surface temperature to 1800 K

Laminated composite insulations developed for potential use on advanced spacecraft operating between GEO and LEO were tested in an aerothermodynamic environment simulating an AOTV aerobraking maneuver (altitude 82.3 km and velocity = 9.0 km/s). Comparisons are discussed between these data and predictions of in-depth temperature response using dynamical thermal conductivity values to 2000 K.

Stewart, David A.↗
NASA NTRS1987

Nitrogen recombination on high-temperature reusable surface insulation and the analysis of its effect on surface catalysis

The energy transfer catalytic recombination coefficients for nitrogen and oxygen on a borosilicate glass are determined in nitrogen and air hypersonic arc jet streams. These data, obtained from a reacting boundary-layer analysis with first-order surface reaction kinetics, compare well with earlier results from a Goulard frozen boundary-layer model up to 1600 K. The apparent surface recombination rates increase up to 1600 K, then begin to decrease. To illustrate the effects of temperature and nitrogen dissociation on energy transfer to the glass, a diffusional heat-flux is calculated using the present results from 1450 K up to 1850 K. This diffusional heat-flux is the contribution to the total heating rate by atom recombination, and is used to compare the present results with coefficients from three previous studies.

Kolodziej, Paul↗