Engineering topics

Stephens, J.

Publications and source records attributed to Stephens, J..

10 records

DOE OSTI2024

Impact of mechanical tolerances on partial turn skipping in helical flux compression generator

Maintaining tight mechanical tolerances of the components used in helical flux compression generators is crucial for optimizing device performance. Moving beyond current literature, which provides various approximations for acceptable tolerances, a 3D simulation of the armature stator interaction during generator operation was developed, revealing that existing equations frequently misestimate the tolerance limits. Without restricting the generality of the presented approach, the focus was primarily on the armature’s concentricity and roundness, comparing the acceptable tolerance limits between generators of different sizes. An analytical approach for select geometries was developed, confirming the 3D results. Quantitative results reveal that a steeper Gurney angle and increased winding pitch allow for less restrictive tolerances for eccentricity and ellipticity. Even small deviations from the ideal armature positioning and shape will result in fluctuations of the output current time-derivative, observed experimentally and in simulation. Larger deviations then cause partial turn skipping, associated with loss of magnetic flux. The simulation elucidates the impact of tolerance deviations on generator performance by offering precise tolerance ranges for various generator sizes, thereby facilitating informed design decisions.

42 ENGINEERING↗

NASA NTRS2017

NASA Cryocooler Technology Developments and Goals to Achieve Zero Boil-Off and to Liquefy Cryogenic Propellants for Space Exploration

NASAs interest in human exploration of Mars has driven it to invest in 20K cryocooler technology to achieve zero boil-off of liquid hydrogen and 90K cryocooler technology to achieve zero boil-off liquid oxygen or liquid methane as well as to liquefy oxygen or methane that is produced on the surface of Mars. These investments have demonstrated efficiency progress, mass reductions, and integration insights. A history of the application of cryocooler technology to zero boil-off propellant storage is presented. A trade space on distributed cooling is shown, along with the progress of reverse turbo-Brayton cycle cryocoolers, where the specific power and specific mass have dropped, decreasing the mass and power of these cryocoolers. Additionally, the cryocooler technology advancements of recuperators and compressors are described. Finally, NASAs development ideas with respect to zero boil-off technology are discussed.

reverse turbo-Brayton cycle cryocooler↗

NASA NTRS2017

NASA Cryocooler Technology Developments and Goals to Achieve Zero Boil-Off and to Liquefy Cryogenic Propellants for Space Exploration

NASA's interest in human exploration of Mars has driven it to invest in 20K cryocooler technology to achieve zero boil-off of liquid hydrogen and 90K cryocooler technology to achieve zero boil-off liquid oxygen or liquid methane as well as to liquefy oxygen or methane that is produced on the surface of Mars. These investments have demonstrated efficiency progress, mass reductions, and integration insights. A history of the application of cryocooler technology to zero boil-off propellant storage is presented. A trade space on distributed cooling is shown, along with the progress of reverse turbo-Brayton cycle cryocoolers, where the specific power and specific mass have dropped, decreasing the mass and power of these cryocoolers. Additionally, the cryocooler technology advancements of recuperators and compressors are described. Finally, NASA's development ideas with respect to zero boil-off technology are discussed.

zero boil-off↗

NASA NTRS2015

Cryogenic Fluid Management Technology Development for Nuclear Thermal Propulsion

Cryogenic fluid management technology is critical to the success of future nuclear thermal propulsion powered vehicles and long duration missions. This paper discusses current capabilities in key technologies and their development path. The thermal environment, complicated from the radiation escaping a reactor of a nuclear thermal propulsion system, is examined and analysis presented. The technology development path required for maintaining cryogenic propellants in this environment is reviewed. This paper is intended to encourage and bring attention to the cryogenic fluid management technologies needed to enable nuclear thermal propulsion powered deep space missions.

Taylor, B. D.↗

NASA NTRS2014

Tri-Gas Pressurization System Testing and Modeling for Cryogenic Applications

The use of Tri‐gas in rocket propulsion systems is somewhat of a new technology. This paper defines Tri‐gas as a mixture of gases composed largely of helium with a small percentage of a stoichiometric mixture of hydrogen and oxygen. When exposed to a catalyst the hydrogen and oxygen in the mixture combusts, significantly raising the temperature of the mixture. The increase in enthalpy resulting from the combustion process significantly decreases the required quantity of gas needed to pressurize the ullage of the vehicle propellant tanks. The objective of this effort was to better understand the operating characteristics of Tri‐gas in a pressurization system with low temperature applications. In conjunction with ongoing programs at NASA Marshall Space Flight Center, an effort has been undertaken to evaluate the operating characteristics of Tri‐gas through modeling and bench testing. Through improved understanding of the operating characteristics, the risk of using this new technology in a launch vehicle propulsion system was reduced. Bench testing of Tri‐gas was a multistep process that targeted gas characteristics and performance aspects that pose a risk to application in a pressurization system. Pressurization systems are vital to propulsion system performance. Keeping a target ullage pressure in propulsions tanks is necessary to supply propellant at the conditions and flow rates required to maintain desired engine functionality. The first component of testing consisted of sampling Tri‐gas sources that had been stagnant for various lengths of time in order to determine the rate at which stratification takes place. Second, a bench test was set up in which Tri‐gas was sent through a catalyst bed. This test was designed to evaluate the performance characteristics of Tri‐gas, under low temperature inlet temperatures, in a flight‐like catalyst bed reactor. The third, most complex, test examined the performance characteristics of Tri‐gas at low temperature temperatures in a test configuration built to more closely resemble a vehicle pressurization system. The results of these bench tests address various risks that all relate to underperformance of Tri‐gas pressurization systems.

Taylor, B.↗

NASA NTRS1992

Condensation of cosmic analog material in microgravity conditions - Preliminary analysis of a first set of flights

The first results of the STARDUST project, aimed at producing and analyzing cosmic-dust analog materials in microgravity conditions, are summarized. The discussion covers the purpose of the investigation, cosmic-dust formation and properties, previous simulations of cosmic-dust formation, the current approach, the microgravity experimental apparatus, and potential advantages of studying dust formation under microgravity conditions.

Mancini, D.↗

NASA NTRS1986

Report on opportunities and/or techniques for high-caliber experimental research (other) proposals for SSPEX

Brief discriptions of the following 13 experiments are included: ultrahigh vacuum petrology facility; artificial comet free flyer; artificial comet (tethered); cosmic dust detector; cosmic dust collector; dust collection using tethered satellites; artificial magnetosphere; microgravity petrological studies; slitless ultraviolet spectrometer; orbital determination and capture experiment (ODACE); high velocity sputtering of amorphous silicates; particle release experiments; and calibration of gamma and X-ray remote sensingprobes.

Nuth, J. A., III↗

NASA NTRS1986

How to make a comet

The primary mandate of NASA is the study of the nature and origin of the solar system. The study of comets provides information about conditions and processes at the beginning of the solar system. Short period comets and their relatives, the near Earth asteroids may prove to be second only to the Sun in importance to the long term survival of civilization for two reasons: as a possible candidate for the cause of mass extinctions of life on Earth and as the material means for the expansion of civilization into the solar system and beyond. In the mean time comets are studied by remote means. Laboratory investigations using synthetic cometary materials may add to the knowledge of these interesting objects. Dust and mantle formation are currently being studied by the use of comet sublimation experiments. Results of these experiments are discussed.

Stephens, J.↗

NASA NTRS1984

Properties of simulated comet mantle

The properties of freeze-dried dilute dispersions of dust in water ice are of considerable interest in studies of comet nucleus mantles. The formation of a rind residue produced by the sublimation of water ice containing various amounts of fine clay particles may be an important process. A simulation of the development of the dry dust rind on the surface of comets is presented. This rind is the result of preferential ice sublimation. The development and disruption of this rind and its subsequent levitation by water vapor flow is studied. The most interesting rind simulant is produced by dispersing 0.1 micron particles of montmorillonite in water in concentrations of 10%, 1%, and 0.1%. These dispersions are then sprayed into liquid nitrogen in the form of 100 micron droplets. The frozen droplets are then freeze-dried in a vacuum which prevents the ice temperature from rising above -30 C. Sublimation of the nitrogen and the water produced dry rinds. The most striking result was the development of large cohesive matrices of individual clay particles, and in some cases a continuous cohesive crust. Scanning electron microscope (SEM) observations reveal that the material formed by freeze-drying the 0.1% dispersion does not retain the original spherical shape of the sprayed 100 micron droplets; instead it consists of a continuous filamentary network, as shown in the SEM stereo micrographs.

Fanale, F. P.↗

NASA NTRS1974

Ultrasonic attenuation - Q measurements on 70215,29

Ultrasonic attenuation measurements have been made on an aluminum alloy, obsidian, and rock samples including lunar sample 70215,29. The measurement technique is based on a combination of the pulse transmission method and the forced resonance method. The technique is designed to explore the problem of defining experimentally, the Q of a medium or sample in which mode conversion may occur. If modes are coupled, the measured attenuation is strongly dependent on individual modes of vibration, and a range of Q-factors may be measured over various resonances or from various portions of a transient signal. On 70215,29, measurements were made over a period of a month while the sample outgassed in hard varuum. During this period, the highest measured Q of this sample increased from a few hundred into the range of 1000-1300.

Warren, N.↗