Engineering Papers⌕ Search

Engineering topics

Stein, Aaron

Publications and source records attributed to Stein, Aaron.

At least 37 records · Page 2

Patterning Si at the 1 nm Length Scale with Aberration-Corrected Electron-Beam Lithography: Tuning of Plasmonic Properties by Design

Patterning of materials at single nanometer resolution allows engineering of quantum confinement effects, as these effects are significant at these length scales, and yields direct control over electro-optical properties. Silicon is by far the most important material in electronics, and the ability to fabricate Si-based devices of the smallest dimensions for novel device engineering is highly desirable. Here, the work presented here uses aberration-corrected electron-beam lithography combined with dry reactive ion etching to achieve both: patterning of 1-nm features and surface and volume plasmon engineering in Si. The nanofabrication technique employed here produces nanowires with a line edge roughness (LER) of 1 nm (3σ). In addition, this work demonstrates tuning of the Si volume plasmon energy by 1.2 eV from the bulk value, which is one order of magnitude higher than previous attempts of volume plasmon engineering using lithographic methods.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Advancing next generation nanolithography with infiltration synthesis of hybrid nanocomposite resists

Organic–inorganic hybrid resists are emerging as an effective way of addressing stringent process requirements for aggressive down-scaling of semiconducting devices. Yet, hybrid resists generally require complex chemical synthesis while being predominantly negative-tone with high dose requirements. For positive-tone processes and high-aspect-ratio pattern transfers, resist choices are limited to costly, non-hybrid alternatives, whose etch resistance is still inferior compared with hybrid resists. In this work, we demonstrate a novel hybrid positive-tone resist platform utilizing simple ex situ vapor-phase inorganic infiltration into standard resist materials. A model system based on poly(methyl methacrylate) (PMMA) thin film hybridized with aluminum oxide has been demonstrated for electron-beam lithography patterning, featuring a fully controllable critical exposure dose, contrast, and etch resistance. The hybrid resist not only achieves contrast as high as ~30, six-fold enhancement over standard PMMA, but also enables Si nanostructures with resolution down to ~30 nm and an aspect ratio as high as ~17, owing to enhancement of the Si etch selectivity to ~70, with an estimated achievable maximum of ~300, far exceeding known commercial positive-tone resist systems. The easy implementabilility, combined with versatile ex situ control of resist characteristics, makes this hybrid resist synthesis method uniquely suited for addressing the resist performance and high throughput required for advanced nanolithography techniques, such as extreme ultraviolet lithography, possibly.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Guiding light in bent waveguide superlattices with low crosstalk

Waveguide superlattices with a subwavelength pitch and low crosstalk can significantly increase the waveguide integration density and are beneficial for many chip-scale applications. Bending of such high-density waveguide superlattices is necessary for flexible signal routing. However, tight bending tends to induce high crosstalk between guided modes, as witnessed in multimode waveguide bends. Here we explore the mechanisms of light guiding and coupling in a subwavelength-pitch waveguide superlattice bend and analyze how bending further modifies the already “renormalized” parameters of superlattice modes via various physical effects. Particularly, bending can skew the phase mismatch in a waveguide superlattice, sometimes producing a near phase-matching condition and causing salient crosstalk spikes among non-first-nearest neighbors. Interestingly, a waveguide superlattice with less pristine phase mismatch may be more robust against such skew of phase mismatch and can suppress crosstalk spikes by ~10 dB. Bending with 5–15 μm radii and subwavelength pitches has been demonstrated with crosstalk lower than -19.5 dB. The scaling of the footprint of waveguide superlattice bending is analyzed, and significant footprint reduction can be achieved for chip-scale applications. The rationale for footprint reduction of superlattice bending under crosstalk constraint differs markedly from that of a single waveguide bend.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hybrid Metasurface-Based Mid-Infrared Biosensor for Simultaneous Quantification and Identification of Monolayer Protein

Metasurfaces emerge as a promising photonic platform for biosensing because they offer strong optical confinement and tunable optical resonances. Here, we show that metasurface-based biosensors consisting of gold nanoantenna arrays loaded with graphene and working in the mid-infrared (mid-IR) spectral range can achieve simultaneous high-sensitivity and high-specificity detection of biomolecules. Strong light–molecule interactions in deeply subwavelength optical spots created by the biosensors allow us to determine the concentration of protein molecules via spectral shifts of the metasurface resonance. A combination of passive and active tuning of the metasurface sensors allows us to spectrally overlap the metasurface resonance and the protein vibrational modes, so that protein molecules can be identified via their characteristic mid-IR “fingerprints”. As a result, the high sensitivity and specificity of the metasurface sensors enable us to determine the secondary structure of protein immunoglobulin (IgG) molecules 4 orders of magnitude more sensitive than attenuated total reflection Fourier transform infrared spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of the nonlinear Wood's anomaly on periodic arrays of nickel nanodimers

Linear and nonlinear magnetophotonic properties of periodic arrays of nickel nanodimers are governed by the interplay of the (local) optical response of individual nanoparticles and (nonlocal) diffraction phenomena. The redistribution of light intensity between diffracted beams when a diffraction order onsets or disappears is known as Wood's anomaly. Here in this paper, angular and magnetic-field-dependent near-infrared spectroscopic measurements, performed for different optical wavelengths and grating constants, discriminate between the linear and nonlinear excitation mechanisms of Wood's anomalies. In the nonlinear regime, evidenced by the magnetic second-harmonic generation, Wood's anomaly is characterized by an order-of-magnitude larger effect in intensity redistribution between the diffracted beams as compared to the linear case. Finally, the nonlinear Wood's anomaly manifests itself also in the nonlinear magnetic contrast highlighting the prospects of nonlinear magnetophotonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithographic patterning

This disclosure provides embodiments of an approach that enforces coexistence of multiple, aligned block copolymer morphologies within a single patterning layer.

47 OTHER INSTRUMENTATION↗

Broadband achromatic dielectric metalenses

Abstract Metasurfaces offer a unique platform to precisely control optical wavefronts and enable the realization of flat lenses, or metalenses, which have the potential to substantially reduce the size and complexity of imaging systems and to realize new imaging modalities. However, it is a major challenge to create achromatic metalenses that produce a single focal length over a broad wavelength range because of the difficulty in simultaneously engineering phase profiles at distinct wavelengths on a single metasurface. For practical applications, there is a further challenge to create broadband achromatic metalenses that work in the transmission mode for incident light waves with any arbitrary polarization state. We developed a design methodology and created libraries of meta-units—building blocks of metasurfaces—with complex cross-sectional geometries to provide diverse phase dispersions (phase as a function of wavelength), which is crucial for creating broadband achromatic metalenses. We elucidated the fundamental limitations of achromatic metalens performance by deriving mathematical equations that govern the tradeoffs between phase dispersion and achievable lens parameters, including the lens diameter, numerical aperture (NA), and bandwidth of achromatic operation. We experimentally demonstrated several dielectric achromatic metalenses reaching the fundamental limitations. These metalenses work in the transmission mode with polarization-independent focusing efficiencies up to 50% and continuously provide a near-constant focal length over λ = 1200–1650 nm. These unprecedented properties represent a major advance compared to the state of the art and a major step toward practical implementations of metalenses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoimprinted Chiral Plasmonic Substrates with Three-Dimensional Nanostructures

Here, we report a large-area fabrication method to prepare chiral substrates patterned with arrays of multilayer, three-dimensional nanostructures using a combination of nanoimprint lithography and glancing angle deposition. Several structures are successfully fabricated using this method, including L-shaped, twisted arc and trilayer twisted Au nanorod structures, demonstrating its generality. As one typical example, arrays of L-shaped nanostructures, consisting of two layers of orthogonally oriented Au nanorods separated by a Ge dielectric layer in the thickness direction, exhibit giant optical chirality in the infrared region with an experimentally achieved g-factor as high as 0.38. Electromagnetic simulations show that the optical chirality results from plasmon hybridization between the two orthogonal Au segments. To demonstrate scalability, a 1 cm 2 chiral substrate is fabricated with uniform chiral optical property. This method combines both high throughput and precise geometrical control and is therefore promising for applications of chiral metamaterials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical conductivity-based ultrasensitive mid-infrared biosensing on a hybrid metasurface

Abstract Optical devices are highly attractive for biosensing as they can not only enable quantitative measurements of analytes but also provide information on molecular structures. Unfortunately, typical refractive index-based optical sensors do not have sufficient sensitivity to probe the binding of low-molecular-weight analytes. Non-optical devices such as field-effect transistors can be more sensitive but do not offer some of the significant features of optical devices, particularly molecular fingerprinting. We present optical conductivity-based mid-infrared (mid-IR) biosensors that allow for sensitive and quantitative measurements of low-molecular-weight analytes as well as the enhancement of spectral fingerprints. The sensors employ a hybrid metasurface consisting of monolayer graphene and metallic nano-antennas and combine individual advantages of plasmonic, electronic and spectroscopic approaches. First, the hybrid metasurface sensors can optically detect target molecule-induced carrier doping to graphene, allowing highly sensitive detection of low-molecular-weight analytes despite their small sizes. Second, the resonance shifts caused by changes in graphene optical conductivity is a well-defined function of graphene carrier density, thereby allowing for quantification of the binding of molecules. Third, the sensor performance is highly stable and consistent thanks to its insensitivity to graphene carrier mobility degradation. Finally, the sensors can also act as substrates for surface-enhanced infrared spectroscopy. We demonstrated the measurement of monolayers of sub-nanometer-sized molecules or particles and affinity binding-based quantitative detection of glucose down to 200 pM (36 pg/mL). We also demonstrated enhanced fingerprinting of minute quantities of glucose and polymer molecules.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

External cavity type-I quantum well cascade diode lasers with a tuning range of 440 nm near 3 μm

A three-stage cascade GaSb-based diode laser heterostructure with an enhanced optical gain spectral bandwidth was designed and fabricated. The gain broadening was achieved by varying the thickness of the type-I quantum wells in different stages of the cascade active region from 10 to 14 nm. The structures were processed into bent ridge gain chips with virtually eliminated feedback from the anti-reflection-coated angled facet. In conclusion, the external cavity devices based on a novel gain chip design demonstrated a record wide tuning range from 2.79 to 3.23 μm in a Littrow cavity configuration at 20°C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Indium Tin Oxide Broadband Metasurface Absorber

Metamaterials have been designed to achieve a wide range of functionalities. Metamaterial absorbers are of particular interest for various applications such as infrared detectors, emissivity coatings, and photovoltaic cells. Various metamaterial platforms have been demonstrated to achieve perfect absorption and several attempts have been made to extend the absorption bandwidth of such devices. We demonstrate a broadband infrared absorber using an asymmetric Fabry–Perot cavity consisting of a monolithically fabricated two-layer metasurface. Superoctave optical absorption is achieved by tailoring the structure of the metasurface layers and the thickness of the cavity. Furthermore, the device yields absorptance of over 80% from λ = 4–16 μm, while maintaining the performance over a wide range of incident angles. In contrast to most metamaterial absorbers, our metasurface layers are made of customized indium tin oxide (ITO), conferring the advantage of CMOS compatibility compared to previous approaches using noble metals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic order and energy-scale hierarchy in artificial spin-ice structures

In order to explain and predict the properties of many physical systems, it is essential to understand the interplay of different energy scales. Here we present investigations of the magnetic order in thermalized artificial spin-ice structures, with different activation energies of the interacting Ising-like elements. We image the thermally equilibrated magnetic states of the nanostructures using synchrotron-based magnetic microscopy. By comparing results obtained from structures with one or two different activation energies, we demonstrate a clear impact on the resulting magnetic order. The differences are obtained by the analysis of the magnetic spin structure factors, in which the role of the activation energies is manifested by distinct short-range order. Furthermore, these results highlight the potential of artificial spin-ice structures to serve as model systems for designing various energy-scale hierarchies and investigating their impact on the collective dynamics and magnetic order.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

3D Nanofabrication via Chemo-Mechanical Transformation of Nanocrystal/Bulk Heterostructures

In this paper, planar nanocrystal/bulk heterostructures are transformed into 3D architectures by taking advantage of the different chemical and mechanical properties of nanocrystal and bulk thin films. Nanocrystal/bulk heterostructures are fabricated via bottom-up assembly and top-down fabrication. The nanocrystals are capped by long ligands introduced in their synthesis, and therefore their surfaces are chemically addressable, and their assemblies are mechanically “soft,” in contrast to the bulk films. Chemical modification of the nanocrystal surface, exchanging the long ligands for more compact chemistries, triggers large volume shrinkage of the nanocrystal layer and drives bending of the nanocrystal/bulk heterostructures. Finally, exploiting the differential chemo-mechanical properties of nanocrystal and bulk materials, the scalable fabrication of designed 3D, cell-sized nanocrystal/bulk superstructures is demonstrated, which possess unique functions derived from nanocrystal building blocks.

36 MATERIALS SCIENCE↗

Interaction modifiers in artificial spin ices

The modification of geometry and interactions in two-dimensional magnetic nanosystems has enabled a range of studies addressing the magnetic order, collective low-energy dynamics and emergent magnetic properties in, for example, artificial spin-ice structures. The common denominator of all these investigations is the use of Ising-like mesospins as building blocks, in the form of elongated magnetic islands. Here, we introduce a new approach: single interaction modifiers, using slave mesospins in the form of discs, within which the mesospin is free to rotate in the disc plane1. We show that by placing these on the vertices of square artificial spin-ice arrays and varying their diameter, it is possible to tailor the strength and the ratio of the interaction energies. We demonstrate the existence of degenerate ice-rule-obeying states in square artificial spin-ice structures, enabling the exploration of thermal dynamics in a spin-liquid manifold. Furthermore, we even observe the emergence of flux lattices on larger length scales, when the energy landscape of the vertices is reversed. In conclusion, the work highlights the potential of a design strategy for two-dimensional magnetic nano-architectures, through which mixed dimensionality of mesospins can be used to promote thermally emergent mesoscale magnetic states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single-Digit Nanometer Electron-Beam Lithography with an Aberration-Corrected Scanning Transmission Electron Microscope

Here, we demonstrate extension of electron-beam lithography using conventional resists and pattern transfer processes to single-digit nanometer dimensions by employing an aberration-corrected scanning transmission electron microscope as the exposure tool. Here, we present results of single-digit nanometer patterning of two widely used electron-beam resists: poly (methyl methacrylate) and hydrogen silsesquioxane. The method achieves sub-5 nanometer features in poly (methyl methacrylate) and sub-10 nanometer resolution in hydrogen silsesquioxane. High-fidelity transfer of these patterns into target materials of choice can be performed using metal lift-off, plasma etch, and resist infiltration with organometallics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Frustration and thermalization in an artificial magnetic quasicrystal

Here, artificial frustrated systems offer a playground to study the emergent properties of interacting systems. Most work to date has been on spatially periodic systems, known as artificial spin ices when the interacting elements are magnetic. Here we have studied artificial magnetic quasicrystals based on quasiperiodic Penrose tiling patterns of interacting nanomagnets. We construct a low-energy configuration from a step-by-step approach that we propose as a ground state. Topologically induced emergent frustration means that this configuration cannot be constructed from vertices in their ground states. It has two parts, a quasi-one-dimensional ‘skeleton’ that spans the entire pattern and is capable of long-range order, surrounding ‘flippable’ clusters of macrospins that lead to macroscopic degeneracy. Magnetic force microscopy imaging of Penrose tiling arrays revealed superdomains that are larger for more strongly coupled arrays, especially after annealing the array above its blocking temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extreme Carrier Depletion and Superlinear Photoconductivity in Ultrathin Parallel-Aligned ZnO Nanowire Array Photodetectors Fabricated by Infiltration Synthesis

Ultrathin semiconductor nanowires enable high-performance chemical sensors and photodetectors, but their synthesis and device integration by standard complementary metal-oxide-semiconductor (CMOS)-compatible processes remain persistent challenges. This work demonstrates fully CMOS-compatible synthesis and integration of parallel-aligned polycrystalline ZnO nanowire arrays into ultraviolet photodetectors via infiltration synthesis, material hybridization technique derived from atomic layer deposition. The nanowire photodetector features unique, high device performances originating from extreme charge carrier depletion, achieving photoconductive on–off ratios of >6 decades, blindness to visible light, and ultralow dark currents as low as 1 fA, the lowest reported for nanostructure-based photoconductive photodetectors. Surprisingly, the low dark current is invariant with increasing number of nanowires and the photodetector shows unusual superlinear photoconductivity, observed for the first time in nanowires, leading to increasing detector responsivity and other parameters for higher incident light powers. Temperature-dependent carrier concentration and mobility reveal the photoelectrochemical-thermionic emission process at grain boundaries, responsible for the observed unique photodetector performances and superlinear photoconductivity. Here, the results elucidate fundamental processes responsible for photogain in polycrystalline nanostructures, providing useful guidelines for developing nanostructure-based detectors and sensors. Lastly, the developed fully CMOS-compatible nanowire synthesis and device fabrication methods also have potentials for scalable integration of nanowire sensor devices and circuitries.

36 MATERIALS SCIENCE↗

Magnetotransport properties of MoP 2

We report magnetotransport and de Haas–van Alphen (dHvA) effect studies on MoP 2 single crystals, predicted to be a type- II Weyl semimetal with four pairs of robust Weyl points located below the Fermi level and long Fermi arcs. The temperature dependence of resistivity shows a peak before saturation, which does not move with magnetic field. Large nonsaturating magnetoresistance (MR) was observed, and the field dependence of MR exhibits a crossover from semiclassical weak-field B 2 dependence to the high-field linear-field dependence, indicating the presence of Dirac linear energy dispersion. In addition, a systematic violation of Kohler's rule was observed, consistent with multiband electronic transport. Strong spin-orbit coupling splitting has an effect on dHvA measurements whereas the angular-dependent dHvA orbit frequencies agree well with the calculated Fermi surface. The cyclotron effective mass ~1.6m e indicates the bands might be trivial, possibly since the Weyl points are located below the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗