Engineering topics

Steger, J. L.

Publications and source records attributed to Steger, J. L..

At least 37 records · Page 2

NASA NTRS1985

Generation of three-dimensional body-fitted coordinates using hyperbolic partial differential equations

An efficient numerical mesh generation scheme capable of creating orthogonal or nearly orthogonal grids about moderately complex three dimensional configurations is described. The mesh is obtained by marching outward from a user specified grid on the body surface. Using spherical grid topology, grids have been generated about full span rectangular wings and a simplified space shuttle orbiter.

Steger, J. L.↗

NASA NTRS1985

Developments in the simulation of compressible inviscid and viscous flow on supercomputers

In anticipation of future supercomputers, finite difference codes are rapidly being extended to simulate three-dimensional compressible flow about complex configurations. Some of these developments are reviewed. The importance of computational flow visualization and diagnostic methods to three-dimensional flow simulation is also briefly discussed.

Steger, J. L.↗

NASA NTRS1985

The numerical simulation of steady transonic rotational flow using a dual potential formulation

A finite-difference method is presented that simulates steady transonic rotational flow of an inviscid fluid by representing the velocity field as the sum of scalar and vector potentials. This dual potential velocity decomposition extends the validity of the scalar (full) velocity potential to include vorticity. The inclusion of a vector potential also permits an alternate treatment of lift that does not require a circulation wake cut. This is accomplished by specifying the vector potential as a constant on the airfoil surface in order to satisfy a Kutta condition. The governing equations are solved as iteratively decoupled scalar equations using approximate factorization techniques, and the overall efficiency approaches that of the full potential equation. The governing equations are able to convect entropy and vorticity throughout the flow field and are equivalent to the Euler equations in continuous flow domains, however at shocks the Rankine-Hugoniot entropy jump must be supplied. An entropy correction method is presented and verified with transonic airfoil solutions of the Euler equations.

Chaderjian, N. M.↗

NASA NTRS1985

Recent improvements in efficiency, accuracy, and convergence for implicit approximate factorization algorithms

In 1977 and 1978, general purpose centrally space differenced implicit finite difference codes in two and three dimensions have been introduced. These codes, now called ARC2D and ARC3D, can run either in inviscid or viscous mode for steady or unsteady flow. Since the introduction of the ARC2D and ARC3D codes, overall computational efficiency could be improved by making use of a number of algorithmic changes. These changes are related to the use of a spatially varying time step, the use of a sequence of mesh refinements to establish approximate solutions, implementation of various ways to reduce inversion work, improved numerical dissipation terms, and more implicit treatment of terms. The present investigation has the objective to describe the considered improvements and to quantify advantages and disadvantages. It is found that using established and simple procedures, a computer code can be maintained which is competitive with specialized codes.

Pulliam, T. H.↗

NASA NTRS1985

A fast efficient implicit scheme for the gasdynamic equations using a matrix reduction technique

An efficient implicit finite-difference algorithm for the gasdynamic equations utilizing matrix reduction techniques is presented. A significant reduction in arithmetic operations is achieved without loss of the stability characteristics generality found in the Beam and Warming approximate factorization algorithm. Steady-state solutions to the conservative Euler equations in generalized coordinates are obtained for transonic flows and used to show that the method offers computational advantages over the conventional Beam and Warming scheme. Existing Beam and Warming codes can be retrofit with minimal effort. The theoretical extension of the matrix reduction technique to the full Navier-Stokes equations in Cartesian coordinates is presented in detail. Linear stability, using a Fourier stability analysis, is demonstrated and discussed for the one-dimensional Euler equations.

Barth, T. J.↗

NASA NTRS1985

Graphics and flow visualization in computational fluid dynamics

Techniques for displaying two- and three-dimensional flowfield solutions are described. Several methods of illustrating flow structure are addressed including particle tracing, simulated oil flow, and shock finding. These are incorporated into an interactive graphics program for CFD flowfields, called PLOT3D. Emphasis is made on the difficulty in visualizing three-dimensional flow features, and the importance of color, fast 3D image manipulation, and dynamic movie play-back in displaying such flows. The need for advanced algorithms to identify shock waves, vortices, and separation lines is pointed out. It is likely that the supercomputer will be needed for this process because of the size of 3D and/or unsteady CFD databases.

Buning, P. G.↗

NASA NTRS1985

A 3-D chimera grid embedding technique

A three-dimensional (3-D) chimera grid-embedding technique is described. The technique simplifies the construction of computational grids about complex geometries. The method subdivides the physical domain into regions which can accommodate easily generated grids. Communication among the grids is accomplished by interpolation of the dependent variables at grid boundaries. The procedures for constructing the composite mesh and the associated data structures are described. The method is demonstrated by solution of the Euler equations for the transonic flow about a wing/body, wing/body/tail, and a configuration of three ellipsoidal bodies.

Benek, J. A.↗

NASA NTRS1985

Developments in the simulation of separated flows using finite difference methods

Compressible viscous flow simulation using finite difference Navier-Stokes and viscous-inviscid interaction methods is described. Recent developments are reviewed that significantly improve the computational efficiency of approximately factored implicit Navier-Stokes algorithms. Compared to Navier-Stokes codes, modern viscous-inviscid interaction codes are more computationally efficient, but have restricted application and are more complicated to program. Therefore, less efficient but more general viscous-inviscid interaction methods are investigated that use forcing functions instead of boundary condition matching, and a simple, direct/inverse, three-dimensional, finite-difference, boundary layer code is presented.

Steger, J. L.↗

NASA NTRS1985

Developments in the simulation of compressible inviscid and viscous flow on supercomputers

Steger, J. L.↗

NASA NTRS1984

A general perturbation approach for computational fluid dynamics

Explore the source record for details and available documents.

Chow, L. J.↗

NASA NTRS1984

An efficient approximate factorization implicit scheme for the equations of gasdynamics

An efficient implicit finite-difference algorithm for the gas dynamic equations utilizing matrix reduction techniques is presented. A significant reduction in arithmetic operations is achieved while maintaining the same favorable stability characteristics and generality found in the Beam and Warming approximate factorization algorithm. Steady-state solutions to the conservative Euler equations in generalized coordinates are obtained for transonic flows about a NACA 0012 airfoil. The theoretical extension of the matrix reduction technique to the full Navier-Stokes equations in Cartesian coordinates is presented in detail. Linear stability, using a Fourier stability analysis, is demonstrated and discussed for the one-dimensional Euler equations. It is shown that the method offers advantages over the conventional Beam and Warming scheme and can retrofit existing Beam and Warming codes with minimal effort.

Barth, T. J.↗

NASA NTRS1984

Simulation of transonic separated airfoil flow by finite difference viscous-inviscid interaction

A finite difference viscous inviscid interaction program has been developed for simulating the separated transonic flow about lifting airfoils, including the wake. In contrast to most interaction programs, this code combines a finite difference boundary layer algorithm with the inviscid program. The recently developed finite difference boundary layer code efficiently simulates attached and reversed compressible boundary layer and wake flows. New viscous inviscid interaction algorithms were also developed to couple the boundary layer code with the inviscid transonic full potential program. Transonic cases with shock induced and trailing edge separation are computed and compared with experimental and Navier-Stokes results.

Vandalsem, W. R.↗

NASA NTRS1983

Finite-difference simulation of transonic separated flow using a full potential boundary layer interaction approach

A new, fast, direct-inverse, finite-difference boundary-layer code has been developed and coupled with a full-potential transonic airfoil analysis code via new inviscid-viscous interaction algorithms. The resulting code has been used to calculate transonic separated flows. The results are in good agreement with Navier-Stokes calculations and experimental data. Solutions are obtained in considerably less computer time than Navier-Stokes solutions of equal resolution. Because efficient inviscid and viscous algorithms are used, it is expected this code will also compare favorably with other codes of its type as they become available.

Van Dalsem, W. R.↗

NASA NTRS1983

A zonal approach for the steady transonic simulation of inviscid rotational flow

A finite difference zonal method is developed to compute steady inviscid transonic flow by coupling a semi-flux split form of the Euler equations in a vorticity producing zone with a zone of scalar and vector (i.e., dual) potential equations. The dual potential equations permit vorticity convection, but not production, and are efficiently solved as an iteratively decoupled set of scalar equations. Zonal results presented for a nonlifting biconvex airfoil on a stretched Cartesian grid show substantial savings in CPU time compared to solving the semi-flux split Euler equations alone. The dual potential equations also provide an alternate way of treating potential flows with circulation. This has been demonstrated by computing a subcritical flow over a lifting airfoil using generalized curvilinear coordinates.

Chaderjian, N. M.↗

NASA NTRS1983

A flexible grid embedding technique with application to the Euler equations

An automated grid embedding procedure for solution of flows about complex geometries is described. The physical domain is subdivided into regions that can accommodate easily generated grids. The grids are organized in a hierarchical structure, and communication among grids is accomplished by interpolation of the flow variables at mesh boundaries. Algorithms for locating embedded boundaries, special treatment of the embedded grids, and the data structures required for manipulating the solution data are described. The method is demonstrated by solution of the Euler equations for transonic flow about a supercritical airfoil and a flapped airfoil.

Benek, J. A.↗

NASA NTRS1983

A general perturbation approach for the equations of fluid dynamics

An efficient numerical technique to produce accurate solutions to the equations of fluid dynamics is presented where the governing equations are perturbed about an approximate solution and solved by finite-difference methods on a coarsened grid. The result is a scheme which substantially reduces the number of grid points necessary to accurately resolve the flow. Applications are presented for the two-dimensional Euler equations perturbed about a solution of the transonic full potential equation. However, the concept is applicable to arbitrary equation sets, higher dimensions and for a wide variety of applications.

Chow, L. J.↗

NASA NTRS1983

A chimera grid scheme

A mesh system composed of multiple overset body-conforming grids is described for adapting finite-difference procedures to complex aircraft configurations. In this so-called 'chimera mesh,' a major grid is generated about a main component of the configuration and overset minor grids are used to resolve all other features. Methods for connecting overset multiple grids and modifications of flow-simulation algorithms are discussed. Computational tests in two dimensions indicate that the use of multiple overset grids can simplify the task of grid generation without an adverse effect on flow-field algorithms and computer code complexity.

Steger, J. L.↗

NASA NTRS1983

Grid generation in three dimensions by Poisson equations with control of cell size and skewness at boundary surfaces

An algorithm for generating computational grids about arbitrary three-dimensional bodies is developed. The elliptic partial differential equation (PDE) approach developed by Steger and Sorenson and used in the NASA computer program GRAPE is extended from two to three dimensions. Forcing functions which are found automatically by the algorithm give the user the ability to control mesh cell size and skewness at boundary surfaces. This algorithm, as is typical of PDE grid generators, gives smooth grid lines and spacing in the interior of the grid. The method is applied to a rectilinear wind-tunnel case and to two body shapes in spherical coordinates.

Sorenson, R. L.↗