Parametrization of LSDA + U for noncollinear magnetic configurations: Multipolar magnetism in UO 2
Not Available
Engineering topics
Publications and source records attributed to Stanek, C. R..
Not Available
Uranium silicide, U 3 Si 2 , has been proposed as an advanced nuclear fuel to be used in light water reactors (LWRs). Development of this alternative to the predominant current fuel, UO 2 , is motivated by enhanced accident tolerance as a result of higher thermal conductivity as well as improved fuel cycle economics through increased uranium density. In order to accurately model the fuel performance of U 3 Si 2 , the diffusion rate of point defects, which is related to self-diffusion, and of fission gas atoms must be determined. DFT calculations are used to predict the U and Si point defect concentrations, the corresponding self-diffusivities, the preferred Xe trap site and the Xe diffusivity. Effects of irradiation are not considered. A low defect formation energy and a high entropy for Si interstitials give rise to Si-rich non-stoichiometry at elevated temperatures. Both U and Si self-diffusion and Xe diffusion are anisotropic as a consequence of the tetragonal crystal structure of U 3 Si 2 . Si diffusion occurs by interstitial mechanisms in both the a-b plane and along the c axis, while the U c axis diffusion rate is controlled by a vacancy mechanism. Interstitial diffusion of U is very fast in the a-b plane of the U 3 Si 2 crystal structure. Xe atoms prefer to occupy U vacancy trap sites. The highest Xe diffusion rate occurs by a vacancy mechanism in both the a-b plane and along the c axis. The diffusion rate is similar in the a-b plane and along the c axis. U and Si self-diffusion and Xe diffusion are all faster in U3Si2 than intrinsic U and Xe diffusion in conventional UO 2 nuclear fuel.
Uranium dioxide (UO 2 ) is a prime nuclear fuel and perhaps the most thoroughly studied actinide material to date. Its thermal and magnetic properties remain, however, a puzzle resulting from strong couplings between magnetism and lattice vibrations. The magnetic state of this cubic material is characterized by a non- collinear antiferromagnetic structure and multidomain Jahn-Teller distortions that could be behind novel thermal properties. Here we show that single crystals of UO 2 , subjected to magnetic fields up to 95 T in the magnetic state, exhibit the abrupt appearance of positive linear magnetostriction leading to a trigonal distortion. Upon reversal of the field the linear term also reverses sign, a hallmark of piezomagnetism. The switching phenomenon occurs at ± 18 T and persists during subsequent field reversals, demonstrating robust magneto-elastic memory. This is the first example of piezomagnetism in an actinide spin system and the magneto-elastic memory loop here is nearly an order of magnitude wider in field than those previously observed, making UO 2 the hardest piezomagnet known. The possibility of an inverse phase with reduced magnetocrystalline anisotropy is considered to explain these effects.
In this paper, two binary phases in the system Hf-O have been synthesized at pressures between 12 and 34 GPa and at temperatures up to 3000 K by reacting Hf with HfO 2 using a laser-heated diamond anvil cell. In situ X-ray diffraction in conjunction with density functional theory calculations has been employed to characterize a previously unreported tetragonal Hf 8 O 7 phase. This phase has a structure which is based on an fcc Hf packing with oxygen atoms occupying octahedral interstitial positions. Its predicted bulk modulus is 223(1) GPa. The second phase has a composition close to Hf 6 O, where oxygen atoms occupy octahedral interstitial sites in an hcp Hf packing. Its experimentally determined bulk modulus is 128(30) GPa. Finally, the phase diagram of Hf metal was further constrained at high pressures and temperatures, where we show that α-Hf transforms to β-Hf around 2160(150) K and 18.2 GPa and β-Hf remains stable up to at least 2800 K at this pressure.
Explore the source record for details and available documents.
In this study, the development of embedded atom method (EAM) many-body potentials for actinide oxides and associated mixed oxide (MOX) systems has motivated the development of a complementary parameter set for gas-actinide and gas-oxygen interactions. A comprehensive set of density functional theory (DFT) calculations were used to study Xe and Kr incorporation at a number of sites in CeO 2 , ThO 2 , UO 2 and PuO 2 . These structures were used to fit a potential, which was used to generate molecular dynamics (MD) configurations incorporating Xe and Kr at 300 K, 1500 K, 3000 K and 5000 K. Subsequent matching to the forces predicted by DFT for these MD configurations was used to refine the potential set. This fitting approach ensured weighted fitting to configurations that are thermodynamically significant over a broad temperature range, while avoiding computationally expensive DFT-MD calculations. The resultant gas potentials were validated against DFT trapping energies and are suitable for simulating combinations of Xe and Kr in solid solutions of CeO 2 , ThO 2 , UO 2 and PuO 2 , providing a powerful tool for the atomistic simulation of conventional nuclear reactor fuel UO 2 as well as advanced MOX fuels.
Not Available
U 3 Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy’s Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3 Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, and Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.
The diffusivity of the solid fission products (FP) Zr (Zr 4+ ), Ru (Ru 4+ , Ru 3+ ), Ce (Ce 4+ ), Y (Y 3+ ), La (La 3+ ), Sr (Sr 2+ ) and Ba (Ba 2+ ) by a vacancy mechanism has been calculated, using a combination of density functional theory (DFT) and empirical potential (EP) calculations. The activation energies for the solid fission products are compared to the activation energy for Xe fission gas atoms calculated previously. Apart from Ru, the solid fission products all exhibit higher activation energy than Xe. Furthermore, for all solid FPs except Y 3+ , the migration of the FP has lower barrier than the migration of a neighboring U atom, making the latter the rate limiting step for direct migration. An indirect mechanism, consisting of two successive migrations around the FP, is also investigated. The calculated diffusivities show that most solid fission products diffuse with rates similar to U self-diffusion. But, Ru, Ba and Sr exhibit faster diffusion than the other solid FPs, with Ru 3+ and Ru 4+ diffusing even faster than Xe for T < 1200 K. The diffusivities correlate with the observed fission product solubility in UO 2 , and the tendency to form metallic and oxide second phase inclusions.
The field of nuclear materials encompasses numerous opportunities to address and ultimately solve longstanding industrial problems by improving the fundamental understanding of materials through the integration of experiments with multiscale modeling and high-performance simulation. A particularly noteworthy example is an ongoing study of axial power distortions in a nuclear reactor induced by corrosion deposits, known as CRUD (Chalk River unidentified deposits). We describe how progress is being made toward achieving scientific advances and technological solutions on two fronts. Specifically, the study of thermal conductivity of CRUD phases has augmented missing data as well as revealed new mechanisms. Additionally, the development of a multiscale simulation framework shows potential for the validation of a new capability to predict the power distribution of a reactor, in effect direct evidence of technological impact. The material- and system-level challenges identified in the study of CRUD are similar to other well-known vexing problems in nuclear materials, such as irradiation accelerated corrosion, stress corrosion cracking, and void swelling; they all involve connecting materials science fundamentals at the atomistic- and mesoscales to technology challenges at the macroscale.
Not Available
The formalism of electronic density-functional theory (DFT), with Hubbard-U corrections (DFT+U), is employed in a computational study of the energetics of fluorite-structured U 1-x Ce x O₂ mixtures. The computational approach makes use of a procedure which facilitates convergence of the calculations to multiple self-consistent DFT+U solutions for a given cation arrangement, corresponding to different charge states for the U and Ce ions in several prototypical cation arrangements. Results indicate a significant dependence of the structural and energetic properties on the nature of both charge and cation ordering. With the effective Hubbard-U parameters that reproduce well the measured oxidation-reduction energies for urania and ceria, we find that charge transfer between U⁴⁺ and Ce⁴⁺ ions, leading to the formation of U⁵⁺ and Ce³⁺, gives rise to an increase in the mixing energy in the range of 4–14 kJ/mol of the formula unit, depending on the nature of the cation ordering. The results suggest that although charge transfer between uranium and cerium ions is disfavored energetically, it is likely to be entropically stabilized at the high temperatures relevant to the processing and service of urania-based solid solutions.