Engineering Papers⌕ Search

Engineering topics

Staiger, Chad L.

Publications and source records attributed to Staiger, Chad L..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Linker Group on Bipolar Redox-Active Molecule Performance in Non-Aqueous Redox Flow Batteries

Redox flow batteries (RFBs) are an attractive choice for stationary energy storage of renewables such as solar and wind. Non-aqueous redox flow batteries (NARFBs) have garnered broad interest due to their high voltage operation compared to their aqueous counterparts. Further, the utilization of bipolar redox-active molecules (BRMs) is a practical way to alleviate crossover faced by asymmetric RFBs. In this work, ferrocene (Fc) and phthalimide (PI) are covalently linked with various tethering groups which vary in structure and length. The compiled results suggest that the length and steric shielding ability of the linker group can greatly influence the stability and overall performance of Fc-n-PI BRM-based NARFBs. Primary sources of capacity loss are found to be BRM degradation for straight chain spacers <6 carbons and membrane (Nafion) fouling. Fc-hexyl-PI provided the most stable battery cycling and coulombic efficiencies of >98 % over 100 cycles (~13 days). NARFB using Fc-hexyl-PI as an active material exhibited high working voltage (1.93 V) and maximum capacity (1.28 Ah L -1 ). Additionally, this work highlights rational strategies to improve cycling stability and optimize NARFB performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Crosslinked polymers with tunable coefficients of thermal expansion

Curatives and their resulting thermosets and other crosslinked polymers can reduce thermal expansion mismatch between an encapsulant and objects that are encapsulated. This can be accomplished by incorporating a negative CTE moiety into the thermoset resin or polymer backbone. The negative CTE moiety can be a thermal contractile unit that shrinks as a result of thermally induced conversion from a twist-boat to chair or cis/trans isomerization upon heating. Beyond CTE matching, other potential uses for these crosslinked polymers and thermosets include passive energy generation, energy absorption at high strain rates, mechanophores, actuators, and piezoelectric applications.

Redline, Erica M.↗
DOE OSTI2021

Tuning Epoxy Thermomechanics via Thermal Isomerization: A Route to Negative Coefficient of Thermal Expansion Materials

Fine control over the thermal expansion and contraction behavior of polymer materials is challenging. Most polymers have large coefficients of thermal expansion (CTEs), which preclude long performance lifetimes of composite materials. Herein, we report the design and synthesis of epoxy thermosets with low CTE values below their T g and large contraction behavior above T g by incorporating thermally contractile dibenzocyclooctane (DBCO) motifs within the thermoset network. This atypical thermomechanical behavior was rationalized in terms of a twist-boat to chair conformational equilibrium of the DBCO linkages. We anticipate these findings to be generally useful in the preparation of materials with designed CTE values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Mediated Flow Batteries

The energy density of nonaqueous redox flow batteries is often limited by the concentration of the redox active species soluble in solution. A possible route to increasing the this energy density is through the use of energy-dense solid materials such as polyoxometalates, LiFePO 4 , or Li x Ti0 2 . These solid materials can be contained in canisters through which an electrolyte with dissolved redox-active species is flowed. The redox potentials for the flowing species are chosen specifically such that they mediate the chemical reduction and oxidation of the solid components. This strategy is advantageous in that it allows for independent optimization of the flow electrolyte (e.g. for low viscosity, high charging rate) and the solid energy storing media (e.g. high energy density). This report summarizes results using a variety of redox active organic and metalorganic species to mediate the oxidation and reduction of polyoxometalate and Li-ion battery chemistries in a redox flow battery system.

25 ENERGY STORAGE↗
DOE OSTI2017

MetILs 3 : A Strategy for High Density Energy Storage Using Redox-Active Ionic Liquids

We present a systematic approach for increasing the concentration of redox-active species in electrolytes for nonaqueous redox flow batteries (RFBs). Starting with an ionic liquid consisting of a metal coordination cation (MetIL), ferrocene-containing ligands and iodide anions are substituted incrementally into the structure. While chemical structures can be drawn for molecules with 10 m redox-active electrons (RAE), practical limitations such as melting point and phase stability constrain the structures to 4.2 m RAE, a 2.3× improvement over the original MetIL. Dubbed “MetILs 3 ,” these ionic liquids possess redox activity in the cation core, ligands, and anions. Throughout all compositions, infrared spectroscopy shows the ethanolamine-based ligands primarily coordinate to the Fe 2+ core via hydroxyl groups. Calorimetry conveys a profound change in thermophysical properties, not only in melting temperature but also in suppression of a cold crystallization only observed in the original MetIL. Square wave voltammetry reveals redox processes characteristic of each molecular location. Testing a laboratory-scale RFB demonstrates Coulombic efficiencies >95% and increased voltage efficiencies due to more facile redox kinetics, effectively increasing capacity 4×. Application of this strategy to other chemistries, optimizing melting point and conductivity, can yield >10 m RAE, making nonaqueous RFB a viable technology for grid scale storage.

25 ENERGY STORAGE↗
DOE OSTI2015

Organosilicon-Based Electrolytes for Long-Life Lithium Primary Batteries

This report describes advances in electrolytes for lithium primary battery systems. Electrolytes were synthesized that utilize organosilane materials that include anion binding agent functionality. Numerous materials were synthesized and tested in lithium carbon monofluoride battery systems for conductivity, impedance, and capacity. Resulting electrolytes were shown to be completely non-flammable and showed promise as co-solvents for electrolyte systems, due to low dielectric strength.

25 ENERGY STORAGE↗