Engineering topics

Stacy, J. E.

Publications and source records attributed to Stacy, J. E..

4 records

NASA NTRS1986

Compensation for Primary Reflector Wavefront Error

The object of the invention is to compensate for errors in a large telescope primary reflector by making certain compensating deviations in a smaller, auxiliary reflector of the telescope. At least one intermediate element forms an image of the primary surface onto the secondary surface, so each point on the secondary surface corresponds to a point on the primary surface. The secondary surface is formed with a deviation from an ideal secondary surface, with the piston distance of each point on the actual secondary surface equal to the piston distance of a corresponding piston on the actual primary surface from the ideal primary surface. It is found that this results in electromagnetic (e.g., light) rays which strike a deviating area of the actual primary surface being brought to the same focus as if the actual primary surface did not have a diviation from an ideal primary surface.

Meinel, A. B.↗

NASA NTRS1986

Wave-front correctors by diamond turning

The production of wave-front correctors by single-point diamond turning is reported. Interferograms are shown which demonstrate excellent agreement between the diamond-turned surface and the desired surface. It is concluded from this experiment that it is now feasible by means of single-point diamond turning to make generalized wave-front control surfaces or to produce any unusual surface desired by the optical designer. The maximum departure from the nearest regular surface is set by the dynamic range and maximum diamond point acceleration permitted by the machine.

Meinel, A. B.↗

NASA NTRS1986

Upgrading telescopes by active pupil wavefront correction

Exit pupil correction of the Large Deployable Reflector's (a proposed IR to sub-mm space telescope) segmented primary can be done by reimaging it onto a like segmented surface at the exit pupil. This allows the primary to be more flexible, the adaptive element to be smaller, and the supporting structure to be cheaper than if all correction were performed at a stiffly supported primary. Piston, tilt, and decenter errors of an annulus of the primary and the equations for the required corrections are considered. To verify these, the perturbations with spline functions in the lens design program are simulated. Strehl ratios used to measure image quality show that a piston error of 1 mm is fully corrected over a 5 arcmin field for an f/10 system with a 0.7 n.a. primary at 30 micrometers. Limits of correction are also shown for tilt and decenter errors of segments. Tolerances are given for tilt and decenter errors of the remaining optics also.

Stacy, J. E.↗

NASA NTRS1984

Asymmetric spline surfaces - Characteristics and applications

Asymmetric spline surfaces appear useful for the design of high-quality general optical systems (systems without symmetries). A spline influence function defined as the actual surface resulting from a simple perturbation in the spline definition array shows that a subarea is independent of others four or more points away. Optimization methods presented in this paper are used to vary a reflective spline surface near the focal plane of a decentered Schmidt-Cassegrain to reduce rms spot radii by a factor of 3 across the field.

Stacy, J. E.↗