Engineering Papers⌕ Search

Engineering topics

Stach, Eric A.

Publications and source records attributed to Stach, Eric A..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamical Change of Valence States and Structure in NiCu 3 Nanoparticles during Redox Cycling

Alloyed materials are promising candidates to improve catalytic processes. Ni–Cu nanoparticles are used for various reactions, including processes with biomass-derived components. However, dynamical restructuring effects alter the catalytic properties and can deactivate the sample. To understand these structural modifications, a multimodal investigation of NiCu 3 /C was performed to determine compositional and morphological changes during a redox cycle to simulate reduction and oxidation of the catalyst during reaction. We exploit a novel correlative, multimodal approach that combines in situ X-ray absorption spectroscopy (XAS) and in situ scanning transmission electron microscopy and electron energy-loss spectroscopy (STEM-EELS) to describe changes that occur in the sample in realistic conditions. In the fresh sample, there are two morphologies present: core–shell and hollow. Segregation of Cu was observed in both types of particles after synthesis, with Cu being more oxidized in the hollow structures. Upon reduction for 2 h under H 2 at 400 °C, the Cu was reduced, although segregation of Cu and Ni was still observed. Subsequent exposure to O 2 at 400 °C led to a strong reoxidation of Cu with the formation of hollow particles with compositional heterogeneities. The oxidation of metals and segregation phenomena can be related to known catalytic properties of NiCu 3 /C particles, especially regarding the hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Replication Data for: Dilute Pd-in-Au alloy RCT-SiO2 catalysts for enhanced oxidative methanol coupling

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Light–matter coupling in large-area van der Waals superlattices

Two-dimensional (2D) crystals have renewed opportunities in design and assembly of artificial lattices without the constraints of epitaxy. However, the lack of thickness control in exfoliated van der Waals (vdW) layers prevents realization of repeat units with high fidelity. Recent availability of uniform, wafer-scale samples permits engineering of both electronic and optical dispersions in stacks of disparate 2D layers with multiple repeating units. In this study, we present optical dispersion engineering in a superlattice structure comprising alternating layers of 2D excitonic chalcogenides and dielectric insulators. By carefully designing the unit cell parameters, we demonstrate greater than 90% narrow band absorption in less than 4 nm of active layer excitonic absorber medium at room temperature, concurrently with enhanced photoluminescence in square-centimetre samples. These superlattices show evidence of strong light–matter coupling and exciton–polariton formation with geometry-tuneable coupling constants. Our results demonstrate proof of concept structures with engineered optical properties and pave the way for a broad class of scalable, designer optical metamaterials from atomically thin layers.

2D Crystals↗
DOE OSTI2021

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Replication Data for: Stabilization of a nanoporous NiCu dilute alloy catalyst for non-oxidative ethanol dehydrogenation

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dilute Pd-in-Au alloy RCT-SiO 2 catalysts for enhanced oxidative methanol coupling

Dilute alloy catalysts have the potential to enhance selectivity and activity for large-scale reactions. Highly dilute Pd-in-Au nanoparticle alloys partially embedded in porous silica (“raspberry colloid templated” (RCT)-SiO 2 ) prove to be robust and selective catalysts for oxidative coupling of methanol. Palladium concentrations in the bimetallic nanoparticles as low as ~3.4 at.% catalyze the production of methyl formate with a selectivity of ~95% at conversions of ~55%, whereas conversions are low (<10%) for ~1.7 at.% Pd-in-Au nanoparticle and pure Au nanoparticle catalysts. Fractional reaction orders for both CH 3 OH and O 2 measured for ~3.4 at.% Pd-in-Au nanoparticles supported on RCT-SiO 2 indicated a complex mechanism in which the sites for O 2 dissociation are not saturated. Optimal methyl formate production was found for an equimolar mixture. There is no conversion of methanol in the absence of O 2 between 360 and 450 K. Finally, all observations are consistent with a mechanism derived from model studies, requiring that clusters of Pd be available on the catalyst for O 2 dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Direct Optoelectronic Imaging of 2D Semiconductor–3D Metal Buried Interfaces

The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing voltage drop at this junction is of particularly challenging and important. Despite numerous studies on contact resistance in 2D semiconductors, the exact nature of the buried interface under a 3D metal remains elusive and unclear. Herein, we report the direct observation of 2D semiconductor-metal buried interface using recently developed metal-assisted transfer technique to expose the buried interface which is then directly investigated using scanning probe techniques. We characterize the spatially varying electronic and optical properties of this buried interface with < 20 nm resolution. To be specific, potential, conductance and photoluminescence at the buried metal/MoS 2 interface are correlated under variety of metal deposition conditions as well as type of metal contacts. We observe that direct evaporation of Au on MoS 2 induces large strain of ~5% in the MoS 2 which coupled with charge transfer leads to degenerate doping of the MoS 2 underneath the contact. These factors lead to improvement of contact resistance to record values of 138 kΩ μm measured using local conductance probes. This approach was adopted to investigate MoS 2 -In/Au alloy interface, which records lowest contact resistance of 63 kΩ μm. Overall, our results highlight that the MoS 2 /Metal interface is very sensitive to method of contact making and provides a universal strategy to characterize buried contact interfaces involving 2D semiconductors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Sub-Microsecond Polarization Switching in (Al,Sc)N Ferroelectric Capacitors Grown on Complementary Metal-Oxide-Semiconductor-Compatible Aluminum Electrodes

In this work, the frequency-dependent ferroelectric properties of 45 nm (Al,Sc)N films sputter deposited on complementary metal–oxide–semiconductor (CMOS)-compatible Al metal electrodes are measured and compared. Low in-plane compressive stress (-10 ± 20 MPa) is observed in (Al,Sc)N thin films deposited on Al electrodes. The (Al,Sc)N films exhibit an imprint in the measured coercive fields (E c ) of -4.3/+5.3 MV cm -1 at 10 kHz. Using positive-up negative-down (PUND) measurements, ferroelectric switching is observed within ≈200 ns of an applied voltage pulse, which demonstrates the ability of ferroelectric (Al,Sc)N to achieve the fast read/write speeds desired in memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

A Thermodynamic Investigation of Ni on Thin-Film Titanates (ATiO3)

Thin, ~1-nm films of CaTiO3, SrTiO3, and BaTiO3 were deposited onto MgAl2O4 by Atomic Layer Deposition (ALD) and then studied as catalyst supports for ~5 wt % of Ni that was added to the perovskite thin films by Atomic Layer Deposition. Scanning Transmission Electron Microscopy demonstrated that both the Ni and the perovskites uniformly covered the surface of the support following oxidation at 1073 K, even after redox cycling, but large Ni particles formed following a reduction at 1073 K. When compared to Ni/MgAl2O4, the perovskite-containing catalysts required significantly higher temperatures for Ni reduction. Equilibrium constants for Ni oxidation, as determined from Coulometric Titration, indicated that the oxidation of Ni shifted to lower PO2 on the perovskite-containing materials. Based on Ni equilibrium constants, Ni interactions are strongest with CaTiO3, followed by SrTiO3 and BaTiO3. The shift in the equilibrium constant was shown to cause reversible deactivation of the Ni/CaTiO3/MgAl2O4 catalyst for CO2 reforming of CH4 at high CO2 pressures, due to the oxidation of the Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗