Engineering topics

Springer, George S.

Publications and source records attributed to Springer, George S..

21 records · Page 2

NASA NTRS1987

Validation of the filament winding process model

Tests were performed toward validating the WIND model developed previously for simulating the filament winding of composite cylinders. In these tests two 24 in. long, 8 in. diam and 0.285 in. thick cylinders, made of IM-6G fibers and HBRF-55 resin, were wound at + or - 45 deg angle on steel mandrels. The temperatures on the inner and outer surfaces and inside the composite cylinders were recorded during oven cure. The temperatures inside the cylinders were also calculated by the WIND model. The measured and calculated temperatures were then compared. In addition, the degree of cure and resin viscosity distributions inside the cylinders were calculated for the conditions which existed in the tests.

Calius, Emilo P.↗

NASA NTRS1987

Degree of cure and viscosity of Hercules HBRF-55 resin

The rate of cure and viscosity were measured for Hercules HBRF-55 resin. The rate of cure was measured by differential scanning calorimetry, while the viscosity was measured by a parallel disk and plate type apparatus. The data were fitted to analytic expressions to make them suitable for use in numerical calculations.

Bhi, S. T.↗

NASA NTRS1986

Impact damage of composites

A model is described for estimating the impact damage of fiber reinforced composite plates. The displacements and stresses are calculated by a three dimensional transient, finite element method of solution of the governing equations applicable to a linearly elastic body. The region in which damage occurs is estimated using the Tsai-Wu failure criterion. A computer code was developed which can be used to calculate the impact force, displacements and velocities of the plate and the impact body, stresses and strains in the plate, and the damage area. Sample numerical results are presented illustrating the type of information provided by the code. Comparisons between measured and calculated damage areas are also given.

Wu, Hsi-Young T.↗