Engineering Papers⌕ Search

Engineering topics

Spier, R. A.

Publications and source records attributed to Spier, R. A..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Vee-notching device

A device is described for forming vee-notches in tensile test specimens comprising a vertically reciprocating, triangular, triple-edged cutting tool guided in a corresponding triangular slot. The specimen to be vee-notched is mounted on a carriage that is movable toward and away from the cutting tool. The specimen is precisely positioned on the carriage by tapered studs that extend into holes in the specimen and are used to expand spring collets against the wall of the holes.

Spier, R. A.↗
NASA NTRS1973

Tilting table for ergometer and for other biomedical devices

The apparatus is for testing the human body in a variety of positions, ranging from the vertical to the supine, while exercising on an ergometer; and can also be used for angular positioning of other biomedical devices. It includes a floor plate and a hinged plate upon which to fix the ergometer, a back rest and a head rest attached at right angles to said hinged plate and behind the seat of the ergometer, dual hydraulic cylinders for raising and lowering the hinged plate through 90 deg by means of a self contained hydraulic system, with valve means for control and positive stops on the apparatus to prevent over travel. Tests can be made with the subject positioned on the seat of the ergometer, through the various angles, with a substantially normal body attitude relative to the seat and ergometer.

Gause, R. L.↗
NASA NTRS1973

Restraint system for ergometer

A restraint system for securing a person to an ergometer while exercising under zero gravity conditions or while operating the ergometer in earth environment in a position other than the upright position. A padded, form-fitting body belt fits around the operator's waist and suspenders are attached to the body belt. The body belt is secured to the ergometer forwardly and rearwardly of the ergometer seat by adjustable belts joined to the body belt and releasably hooked to the ergometer frame.

Gause, R. L.↗
NASA NTRS1971

Tilt table for ergometers and other biomedical devices

Table adjusts to any position between horizontal and vertical. Apparatus includes - floor plate, plate hinged to floor plate, for carrying ergometer, hydraulic cylinder and piston on plate sides, linking them, hydraulic system, positive stops, padded backrest and headrest, one hand controls, and constraint system.

Gause, R. L.↗
NASA NTRS1971

Multimode ergometer system

System overcomes previous ergometer design and calibration problems including inaccurate measurements, large weight, size, and input power requirements, poor heat dissipation, high flammability, and inaccurate calibration. Device consists of lightweight, accurately controlled ergometer, restraint system, and calibration system.

Bynum, B. G.↗
NASA NTRS1971

Hydraulically operated tilt table

Table raises, lowers, or tilts test subject from vertical through an angle of 105 deg to a head-down position of 15 deg. Table is designed for medical center or laboratory use. Additional features are described.

Gause, R. L.↗
NASA NTRS1970

Vee-notch tool cuts specimens

Triangular cutting tool uses carbide tips for notching heat-treated or abrasive materials, and alloys subjected to high structural stresses. The tool is rigidly mounted in a slot of mating contour to prevent deflection during cutting of tensile specimens. No other expensive machine equipment is required.

Spier, R. A.↗
NASA NTRS1966

Portable power tool machines weld joints in field

Portable routing machine for cutting precise weld joints required by nonstandard pipe sections used in the field for transfer of cryogenic fluids. This tool is adaptable for various sizes of pipes and has a selection of router bits for different joint configurations.

Spier, R. A.↗