Engineering Papers⌕ Search

Engineering topics

Snead, Lance

Publications and source records attributed to Snead, Lance.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Build-to-Replace: A New Paradigm for Reducing Advanced Reactor O&M Costs

Nuclear energy is a carbon free source of reliable, resilient, and dispatchable energy that has the potential to feature prominently in a future energy mix. To this end, many new reactor designs are being developed to help reduce cost and improve safety. Operating and maintenance (O&M) costs can make up a significant portion of lifecycle costs. Traditional approaches for nuclear plant design O&M is to perform significant inspections and testing of plant equipment to extend the life of equipment as long as possible. This is contrasted with approaches used in other industries where equipment is replaced when it is no longer functional in lieu of spending time and resources on maintenance. This research investigated the “build-to-replace” approach for new nuclear power plants. A methodology was developed to evaluate the effectiveness of the “build-to-replace” approach. Several scenarios were developed and analyzed using the approach. Modest reductions in O&M costs were obtained in some cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Compatibility of FeCrAlMo in Flowing Pb-Li at 600°C to 700°C

A series of monometallic thermal convection loops (TCLs) has been conducted to determine the maximum temperature where FeCrAl alloys have compatibility with eutectic lead lithium (Pb-Li) for a dual-coolant fusion blanket. Pre-oxidizing commercial alloy APMT (Fe-21Cr-5Al-3Mo) for 2 h at 1000°C to form a surface α-Al 2 O 3 layer was very effective in reducing the mass loss of specimens in the hot and cold legs of the most recent TCL that was operated for 1000 h with a peak temperature of 700°C. However, unlike previous experiments, the postexposure room temperature ductility of many of the APMT specimens was degraded to <10% total elongation, and many of the specimens at the highest temperature (>680°C) were severely damaged or were not recovered. Furthermore, wide-angle X-ray scattering found that the pre-formed α-Al 2 O 3 scale transformed to a mixture of trigonal and tetragonal LiAlO 2 . The overall results suggest that the maximum temperature for FeCrAl is limited to <700°C.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Technological aspects in blanket design: Effects of micro-alloying and thermo-mechanical treatments of EUROFER97 type steels after neutron irradiation

Presently available data on neutron irradiation damage raise doubts on the feasibility of using EUROFER97 steel for a water-cooled starter blanket in a DEMO reactor, since the ductile-to-brittle transition temperature (DBTT) increases significantly for irradiation temperatures below 350°C. The additional DBTT shift caused by H and He transmutation can only be estimated based on very few results with isotopically tailored EUROFER97 steel. Conservative calculations show that the DBTT of EUROFER97 steel could exceed the operating temperature in water-cooled starter blankets within a relatively short time period. This paper presents results from a EUROfusion funded irradiation campaign that was performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. The paper compares ten newly developed reduced activation ferritic-martensitic (RAFM) steels irradiated to a nominal dose of 2.5 dpa at 300°C. The post-irradiation experiments using Small Specimen Test Technology included hardness, tensile, and fracture mechanics tests combined with fractography and microstructure analysis are presented. Results show that micro-alloying EUROFER97-type steels influenced the mechanical properties but a dominating impact on irradiation damage resistance could not be identified. In contrast, specific thermo-mechanical treatments lead to better DBTT behavior. Discussion about irradiation response to heat treatment conditions is also given. Here, despite requiring data also at high dpa values, the results indicate that with these modified materials an increased lifetime and potentially also an increased operating temperature window can be achieved compared to EUROFER97.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Summary Report on the Refined User Requirements for U.S. Fusion Prototypic Neutron Source

The Fusion Prototypic Neutron Source (FPNS) is proposed as an urgent near-term facility necessary for understanding D-T fusion neutron degradation processes in materials and for the development of high-performance radiation tolerant materials for fusion power reactors. This facility is central to our goal of predicting the behavior of materials in the harsh D-T neutron environment and calibrating and verifying the materials performance models necessary to support design of next-generation fusion reactors. Key FPNS performance metrics were previously defined for the cost-efficient facility necessary to adequately and expediently resolve key materials science knowledge gaps required to move to next-step fusion devices. This brief report is intended to expand upon this previous metrics discussion as an aid to selecting the most desirable FPNS concept and enabling a facility that meets the program needs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Hydrothermal Corrosion of First-Generation Dual-Purpose Coatings on Silicon Carbide for Accident-Tolerant Fuel Cladding

In this study, four different commercial coatings, TiN, Cr, CrN, and Cr/CrN (multilayer) were deposited by physical vapor deposition (PVD) on high resistivity chemical vapor deposited (CVD) SiC for the dual purpose of corrosion mitigation and fission gas hermeticity. The coatings were exposed for up to 2600 hours in flowing high temperature (288-350°C), high purity, liquid water with dissolved hydrogen (0.15-3ppm) or dissolved oxygen (1-2ppm). The Cr/CrN coatings did not adhere well and spalled quickly during exposure. In oxygenated conditions, none of the coatings were protective . CrN coatings spalled preferentially at defect sites, but reacted slowly enough in the absence of defects to potentially be chemically protective. TiN coatings fully oxidized within a few hundred hours and spalled. In hydrogen, all the coatings were chemically stable. Coating failures were identified and attributed to localized spallation, potentially related to coating defects. Coating improvements are recommended to reduce spallation and improve coating protection for future generations of dual-purpose coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Powering the Future: Fusion & Plasmas

This report provides a decade-long vision for the field of fusion energy and plasma science and presents a path to a promising future of new scientific discoveries, industrial applications, and, ultimately, the delivery of fusion energy. We identify critical areas for research and development and prioritize investments to maximize impact. The research community worked for more than a year to develop a wealth of creative ideas designed to accelerate fusion energy and advance plasma science. The effort culminated in the consensus Community Planning Process report. Our work is based heavily on that report, and we extend our sincere gratitude to our colleagues for their efforts. Following the research community’s lead, we worked through consensus to generate this report. Many ideas were heard and were thoughtfully deliberated until a shared view on each issue emerged. This process allowed us to discuss and appreciate our different points of view and come to consensus language. Ultimately, we speak with one voice in conveying a vision for a vibrant program that will bring significant benefit to society.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The effects of neutron and ionizing irradiation on the aqueous corrosion of SiC

Chemical vapor deposited (CVD) SiC and nuclear-grade SiC/SiC composite materials were exposed to light water reactor (LWR) conditions at the MIT Nuclear Reactor (MITR) here. Three sets of samples were exposed within flowing PWR-chemistry-coolant under either 1) neutron and ionizing irradiation with resulting radiolysis products, 2) radiolysis products without neutron flux, 3) loop coolant. Post-irradiation examination (PIE) exhibited an increase in corrosion from radiolysis products (particularly H 2 O 2 ), and potentially a further increase from radiation damage. For CVD SiC, regardless of exposure location, the in-situ observed corrosion rate was less than 1 µm per year, potentially within acceptable limits for LWR application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Evaluation of the effects of neutron irradiation on first-generation corrosion mitigation coatings on SiC for accident-tolerant fuel cladding

In this work, high purity SiC and SiC/SiC composites coated with commercial TiN, Cr, CrN, or CrN/Cr multilayer coatings were irradiated in Ar or flowing PWR water in the Massachusetts Institute of Technology Nuclear Reactor Laboratory (MITR). Irradiation in Ar was performed in the core. In the water environment, identical samples were placed in one of three different locations: in-core, providing exposure to neutron damage and radiolysis-affected water; above-core, where samples were exposed to radiolysis-affected water but not neutron damage, or outside of the core, where samples were exposed to the coolant water without the effects of radiation. Radiation in Ar revealed significant cracking of all but the TiN coatings, attributed to differential swelling between the coating and substrate. Lattice swelling was not observed in any of the coatings, but 0.2% void swelling was observed in the Cr coating. All of the coatings failed during water exposures in the core. Likewise, CrN/Cr spalled in each condition. Cr was protective, except under radiation damage as a result of cracking, and TiN severely degraded in the core with no coating was found following exposure. A SiC/coating ATF cladding system is anticipated to perform adequately following improvements in coating ductility and purity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗