Engineering PapersSearch

Engineering topics

Smith, O. E.

Publications and source records attributed to Smith, O. E..

At least 37 records · Page 2

Sensitivity analysis of the space shuttle to ascent wind profiles

A parametric sensitivity analysis of the space shuttle ascent flight to the wind profile is presented. Engineering systems parameters are obtained by flight simulations using wind profile models and samples of detailed (Jimsphere) wind profile measurements. The wind models used are the synthetic vector wind model, with and without the design gust, and a model of the vector wind change with respect to time. From these comparison analyses an insight is gained on the contribution of winds to ascent subsystems flight parameters.

Smith, O. E.

Sensitivity analysis of the Space Shuttle to ascent wind profiles

This paper presents a parametric sensitivity analysis of the Space Shuttle Ascent flight to the wind profile. Engineering systems parameters are obtained by flight simulations using wind profile models and samples of detailed (Jimsphere) wind profile measurements. The wind models used are the synthetic vector wind model, with and without the design gust, and a model of the vector wind change with respect to time. From these comparison analyses an insight is gained on the contribution of winds to ascent subsystems flight parameters.

Smith, O. E.

Vector wind profile gust model

The development of a vector wind gust model that is suitable for orbital flight test operations and trade studies was studied. Verification of the hypothesis that gust component variables are gamma distributed, gust modulus is approximately Weibull distributed, and zonal and meridional gust components are bivariate gamma distributed is emphasized. A method of testing for bivariate gamma distributed variables, and two distributions for gust modulus are described. The results of extensive hypothesis testing of one of the distributions are presented, and the validity of the gamma distribution for representation of gust component variables is established.

Adelfang, S. I.

Worldwide cloud cover model

Classifying worldwide cloudiness into homogeneous regions, using a satellite data set containing day IR, night IR, incoming, and absorbed solar radiation measurements on a 2.5-degree latitude-longitude grid is considered. Methods of analysis are presented.

Smith, O. E.

Four-D global reference atmosphere

Model generates values for pressure, density, temperature, and winds from surface level to orbital altitudes. Program can define altitude profiles of atmospheric parameters for simulated trajectory.

Robertson, B.

Cloud cover modeling

Results from two investigations in modeling cloud cover are presented. These are a univariate model and a multivariate model for cloud cover.

Smith, O. E.

Vector wind and vector wind shear models 0 to 27 km altitude for Cape Kennedy, Florida, and Vandenberg AFB, California

The techniques are presented to derive several statistical wind models. The techniques are from the properties of the multivariate normal probability function. Assuming that the winds can be considered as bivariate normally distributed, then (1) the wind components and conditional wind components are univariate normally distributed, (2) the wind speed is Rayleigh distributed, (3) the conditional distribution of wind speed given a wind direction is Rayleigh distributed, and (4) the frequency of wind direction can be derived. All of these distributions are derived from the 5-sample parameter of wind for the bivariate normal distribution. By further assuming that the winds at two altitudes are quadravariate normally distributed, then the vector wind shear is bivariate normally distributed and the modulus of the vector wind shear is Rayleigh distributed. The conditional probability of wind component shears given a wind component is normally distributed. Examples of these and other properties of the multivariate normal probability distribution function as applied to Cape Kennedy, Florida, and Vandenberg AFB, California, wind data samples are given. A technique to develop a synthetic vector wind profile model of interest to aerospace vehicle applications is presented.

Smith, O. E.

A global reference atmospheric model for surface to orbital altitudes

An empirical atmospheric model has been developed which generates values for pressure, density, temperature and winds from surface levels to orbital altitudes. The output parameters consist of components for: (1) latitude, longitude, and altitude dependent monthly means; (2) quasi-biennial oscillations; and (3) random perturbations to partially simulate the variability due to synoptic, diurnal, planetary wave and gravity wave variations. The monthly mean models consist of: NASA's four dimensional worldwide model for height, latitude, and longitude dependent monthly means from the surface to 25 km; and a newly developed latitude-longitude dependent model which is an extension of the Groves latitude dependent model for the region between 25 and 90 km. The Jacchia 1970 model is used above 90 km and is faired with the modified Groves values between 90 and 115 km. Quasi-biennial and random variation perturbations are computed from parameters determined from various empirical studies, and are added to the monthly mean values.

Justus, C. G.

Four-D global reference atmosphere technical description, part 1

An empirical atmospheric model was developed which generates values for pressure, density, temperature, and winds from surface levels to orbital altitudes. The output parameters consist of components for: (1) latitude, longitude, and altitude dependent monthly and annual means; (2) quasi-biennial oscillations; and (3) random perturbations to simulate partially the variability due to synoptic, diurnal, planetary wave, and gravity wave variations. Quasi-biennial and random variation perturbations are computed from parameters determined from various empirical studies and are added to the monthly mean values. This model has been developed as a computer program called PROFILE which can be used to generate altitude profiles of atmospheric parameters along any simulated trajectory through the atmosphere. The PROFILE program was developed for design applications in the space shuttle program. Other applications of the model are discussed, such as for global circulation and diffusion studies, and for generating profiles for comparison with other atmospheric measurement techniques, (e.g. satellite measured temperature profiles).

Justus, C. G.

A global atmospheric model for aerospace applications

An empirical 4-D atmospheric model is described, whose ultimate goal is to give pressure, temperature, and density variables and their structure as a function of latitude, longitude, altitude, and the time domain (seasonal and perhaps time of day) over the altitude range from sea level to 185 km. The computer program combines the 4-D model of Siegler and Fowler (1972) for the range 0-25 km altitude, the modified Groves (1971) model for the range 30-90 km, and the Jacchia (1970) model for the range 115-185 km. Between 90 and 115 km, a smooth transition between the Groves values and Jacchia values was obtained by a fairing technique, while between 25 and 30 km an interpolation scheme was used between the 4-D results and the Groves values. The program is designed to give atmospheric parameter values along a simulated trajectory and a profile, such as a vertical profile at a single location. A set of trajectory positions for any desired trajectory, ascent or re-entry, can be input to the program for evaluation of atmospheric parameters for design purposes.

Justus, C. G.

Data for first NASA Atmospheric Variability Experiment (AVE 1). Part 1: Data tabulation

A tablulation is given of rawinsonde data for NASA's first Atmospheric Variability Experiment (AVE 1) conducted during the period February 19-22, 1964. Methods of data handling and processing, and estimates of error magnitudes are also given. Data taken on the AVE 1 project in 1964 enabled an analysis of a large sector of the eastern United States on a fine resolution time scale. This experiment was run in February 1964, and data were collected as a wave developed in the East Gulf on a frontal system which extended through the eastern part of the United States. The primary objective of AVE 1 was to investigate the variability of parameters in space and over time intervals of three hours, and to integrate the results into NASA programs which require this type of information. The results presented are those from one approach, and represent only a portion of the total research effort that can be accomplished.

Scoggins, J. R.

Inflight thermodynamic properties

The inflight thermodynamic parameters (temperature, pressure, and density) of the atmosphere are presented. Mean and extreme values of the thermodynamic parameters given here can be used in application of many aerospace problems, such as: (1) research and planning and engineering design of remote earth sensing systems; (2) vehicle design and development; and (3) vehicle trajectory analysis, dealing with vehicle thrust, dynamic pressure, aerodynamic drag, aerodynamic heating, vibration, structural and guidance limitations, and reentry analysis. Atmospheric density plays a very important role in most of the above problems. A subsection on reentry is presented, giving atmospheric models to be used for reentry heating, trajectory, etc., analysis.

Brown, S. C.

Distribution of surface extremes in the United States

Extreme design environment data are presented for consideration in aerospace vehicle transportation, fabrication, or testing. Values were obtained by using data from weather stations and published meteorological articles. Maps depict snow fall, hail distribution, atmospheric pressure, atmospheric temperature, and surface elevations.

Daniels, G. E.

Severe weather, sea state, and selected climatologies

With the development of aerospace launch vehicles which are to be recovered by flying back to the earth's surface, additional climatic data are needed on specific landing sites. A short discussion is presented that includes tornadoes, hurricanes, tropical storms and effects of sea states.

Brown, S. C.

Effects of atmospheric models on space shuttle trajectories and aerodynamic heating.

Review of the respective contributions from the atmospheric physicist, trajectory analyst, and aerothermodynamist to the design problem underlying the selection of the space-shuttle booster mode to be developed, i.e., either expendable booster, recoverable booster, or flyback booster, and the configuration and composite configuration. The interrelationships between atmospheric variables, trajectory parameters, and aerodynamic heating loads are discussed.

Smith, O. E.