Engineering Papers⌕ Search

Engineering topics

Smith, M. C.

Publications and source records attributed to Smith, M. C..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

LAMOST DR1: Stellar Parameters and Chemical Abundances with SP-Ace

We present a new analysis of the LAMOST DR1 survey spectral database performed with the code SP-Ace, which provides the derived stellar parameters T{sub eff}, logg, [Fe/H], and [α/H] for 1,097,231 stellar objects. We tested the reliability of our results by comparing them to reference results from high spectral resolution surveys. The expected errors can be summarized as ∼120 K in T{sub eff}, ∼0.2 in logg, ∼0.15 dex in [Fe/H], and ∼0.1 dex in [α/Fe] for spectra with S/N > 40, with some differences between dwarf and giant stars. SP-Ace provides error estimations consistent with the discrepancies observed between derived and reference parameters. Some systematic errors are identified and discussed. The resulting catalog is publicly available at the LAMOST and CDS websites.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

The Identification of the White Dwarf Companion to the Millisecond Pulsar J2317+1439

We report the identification of the optical counterpart to the companion of the millisecond pulsar J2317+1439. At the timing position of the pulsar, we find an object with g=22.96±0.05, r=22.86±0.04, and i=22.82±0.05. The magnitudes and colors of the object are consistent with a white dwarf (WD). Compared with WD cooling models, we estimate that it has a mass of 0.39{sub −0.10}{sup +0.13} M{sub ⊙}, an effective temperature of 8077{sub −470}{sup +550} K, and a cooling age of 10.9 ± 0.3 Gyr. Combining our results with published constraints on the orbital parameters obtained through pulsar timing, we estimate the pulsar mass to be 3.4{sub −1.1}{sup +1.4} M{sub ⊙}. Although the constraint on the pulsar mass is still weak, there is a significant possibility that the pulsar could be more massive than two solar masses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

The Gaia-ESO survey: metal-rich bananas in the bulge

We analyze the kinematics of ∼2000 giant stars in the direction of the Galactic bulge, extracted from the Gaia-ESO survey in the region −10{sup ∘}≲ℓ≲10{sup ∘} and −11{sup ∘}≲b≲−3{sup ∘}. We find distinct kinematic trends in the metal-rich ([M/H]>0) and metal-poor ([M/H]<0) stars in the data. The velocity dispersion of the metal-rich stars drops steeply with latitude, compared to a flat profile in the metal-poor stars, as has been seen previously. We argue that the metal-rich stars in this region are mostly on orbits that support the boxy–peanut shape of the bulge, which naturally explains the drop in their velocity dispersion profile with latitude. The metal-rich stars also exhibit peaky features in their line of sight velocity histograms, particularly along the minor axis of the bulge. We propose that these features are due to stars on resonant orbits supporting the boxy–peanut bulge. This conjecture is strengthened through the comparison of the minor axis data with the velocity histograms of resonant orbits generated in simulations of buckled bars. The “banana” or 2:1:2 orbits provide strongly bimodal histograms with narrow velocity peaks that resemble the Gaia-ESO metal-rich data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Gravitational microlensing by neutron stars and radio pulsars: Event rates, timescale distributions, and mass measurements

We investigate properties of Galactic microlensing events in which a stellar object is lensed by a neutron star. For an all-sky photometric microlensing survey, we determine the number of lensing events caused by ∼10{sup 5} potentially observable radio pulsars to be ∼0.2 yr{sup −1} for 10{sup 10} background stellar sources. We expect a few detectable events per year for the same number of background sources from an astrometric microlensing survey. We show that such a study could lead to precise measurements of radio pulsar masses. For instance, if a pulsar distance could be constrained through radio observations, then its mass would be determined with a precision of ∼10%. We also investigate the timescale distributions for neutron star events, finding that they are much shorter than had been previously thought. For photometric events toward the Galactic center that last ∼15 days, around 7% will have a neutron star lens. This fraction drops rapidly for longer timescales. Away from the bulge region we find that neutron stars will contribute ∼40% of the events that last less than ∼10 days. These results are in contrast to earlier work which found that the maximum fraction of neutron star events would occur on timescales of hundreds of days.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

RR Lyrae in XSTPS: The halo density profile in the north galactic cap

We present a catalog of RR Lyrae stars (RRLs) observed by the Xuyi Schmidt Telescope Photometric Survey (XSTPS). The area we consider is located in the north Galactic cap, covering ≈376.75 deg{sup 2} at α ≈ 150° and δ ≈ 27° down to a magnitude limit of i ≈ 19. Using the variability information afforded by the multi-epoch nature of our XSTPS data, combined with colors from the Sloan Digital Sky Survey, we are able to identify candidate RRLs. We find 318 candidates, derive distances to them, and estimate the detection efficiency. The majority of our candidates have more than 12 observations, and for these we are able to calculate periods. These also allow us to estimate our contamination level, which we predict is between 30% and 40%. Finally, we use the sample to probe the halo density profile in the 9-49 kpc range and find that it can be well fitted by a double power law. We find good agreement between this model and the models derived for the south Galactic cap using the Watkins et al. and Sesar et al. RRL data sets, after accounting for possible contamination in our data set from Sagittarius stream members. We consider non-spherical double power-law models of the halo density profile and again find agreement with literature data sets, although we have limited power to constrain the flattening due to our small survey area. Much tighter constraints will be placed by current and future wide-area surveys, most notably ESA's astrometric Gaia mission. Our analysis demonstrates that surveys with a limited number of epochs can effectively be mined for RRLs. Our complete sample is provided as accompanying online material; as an example the first few entries of each electronic table are shown in the text.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2011

Thermal Analyses of Apollo Lunar Soils Provide Evidence for Water in Permanently Shadowed Areas

Thermally-evolved-gas analyses were performed on the Apollo lunar soils shortly after their return to Earth [1-8]. The analyses revealed the presence of water evolving at temperatures above 200 C. Of particular interest are samples that were collected from permanently-shadowed locations (e.g., under a boulder) with a second sample collected in nearby sunlight, and pairs in which one was taken from the top of a trench, and the second was taken at the base of the trench, where the temperature would have been -10 to -20 C prior to the disturbance [9]. These samples include 63340/63500, 69941/69961, and 76240/76280. At the time that this research was first reported, the idea of hydrated minerals on the lunar surface was somewhat novel. Nevertheless, goethite was observed in lunar breccias from Apollo 14 [10], and it was shown that goethite, hematite and magnetite could originate in an equilibrium assemblage of lunar rocks

Cooper, Bonnie L.↗
NASA NTRS1991

Selection of human consumables for future space missions

Consumables for human spaceflight include oxygen, water, food and food packaging, personal hygiene items, and clothing. This paper deals with the requirements for food and water, and their impact on waste product generation. Just as urbanization of society has been made possible by improved food processing and packaging, manned spaceflight has benefitted from this technology. The downside of this technology is increased food package waste product. Since consumables make up a major portion of the vehicle onboard stowage and generate most of the waste products, selection of consumables is a very critical process. Food and package waste comprise the majority of the trash generated on the current shuttle orbiter missions. Plans for future missions must include accurate assessment of the waste products to be generated, and the methods for processing and disposing of these wastes.

Food Packaging↗
NASA NTRS1990

Early experiences building a software quality prediction model

Early experiences building a software quality prediction model are discussed. The overall research objective is to establish a capability to project a software system's quality from an analysis of its design. The technical approach is to build multivariate models for estimating reliability and maintainability. Data from 21 Ada subsystems were analyzed to test hypotheses about various design structures leading to failure-prone or unmaintainable systems. Current design variables highlight the interconnectivity and visibility of compilation units. Other model variables provide for the effects of reusability and software changes. Reported results are preliminary because additional project data is being obtained and new hypotheses are being developed and tested. Current multivariate regression models are encouraging, explaining 60 to 80 percent of the variation in error density of the subsystems.

Agresti, W. W.↗
NASA NTRS1978

Analysis techniques for two-dimensional infrared data

In order to evaluate infrared detection and remote sensing systems, it is necessary to know the characteristics of the observational environment. For both scanning and staring sensors, the spatial characteristics of the background may be more of a limitation to the performance of a remote sensor than system noise. This limitation is the so-called spatial clutter limit and may be important for systems design of many earth application and surveillance sensors. The data used in this study is two dimensional radiometric data obtained as part of the continuing NASA remote sensing programs. Typical data sources are the Landsat multi-spectral scanner (1.1 micrometers), the airborne heat capacity mapping radiometer (10.5 - 12.5 micrometers) and various infrared data sets acquired by low altitude aircraft. Techniques used for the statistical analysis of one dimensional infrared data, such as power spectral density (PSD), exceedance statistics, etc. are investigated for two dimensional applicability. Also treated are two dimensional extensions of these techniques (2D PSD, etc.), and special techniques developed for the analysis of 2D data.

Winter, E. M.↗
NASA NTRS1976

Mineral and nitrogen balance study observations - The second manned Skylab mission

A metabolic study of important body elements, particularly those of the musculoskeletal system, was carried out on the astronauts of the Skylab 3 mission during the preflight, inflight, and postflight phases. An elevation in the level of urinary calcium similar to that observed in the 28-d Skylab flight continued throughout the flight. Significant nitrogen and phosphorus losses, apparently associated with muscle tissue loss, occurred in spite of inflight exercise programs. On the basis of these results it is predicted that capable musculoskeletal function is likely to occur in flights longer than about 9 months in duration.

Whedon, G. D.↗
NASA NTRS1974

Progress of the LASL dry hot rock geothermal energy project

The possibilities and problems of extracting energy from geothermal reservoirs which do not spontaneously yield useful amounts of steam or hot water are discussed. The system for accomplishing this which is being developed first is a pressurized-water circulation loop intended for use in relatively impermeable hot rock. It will consist of two holes connected through the hot rock by a very large hydraulic fracture and connected at the surface through the primary heat exchanger of an energy utilization system. Preliminary experiments in a hole 2576 ft (0.7852 km) deep, extending about 470 ft (143 m) into the Precambrian basement rock underlying the Jemez Plateau of north-central New Mexico, revealed no unexpected difficulties in drilling or hydraulically fracturing such rock at a temperature of approximately 100 C, and demonstrated a permeability low enough so that it appeared probable that pressurized water could be contained by the basement rock. Similar experiments are in progress in a second hole, now 6701 ft (2.043 km) deep, about 1.5 miles (2.4 km) south of the first one.

Smith, M. C.↗
NASA NTRS1974

Space Shuttle food galley design concept

A food galley has been designed for the crew compartment of the NASA Space Shuttle Orbiter. The rationale for the definition of this design was based upon assignment of priorities to each functional element of the total food system. Principle priority categories were assigned in the following order: food quality, nutrition, food packaging, menu acceptance, meal preparation efficiency, total system weight, total system volume, and total power requirements. Hence, the galley was designed using an 'inside-out' approach which first considered the food and related biological functions and subsequently proceeded 'outward' from the food to encompass supporting hardware. The resulting galley is an optimal design incorporating appropriate priorities for trade-offs between biological and engineering constraints. This design approach is offered as a model for the design of life support systems.

Heidelbaugh, N. D.↗
NASA NTRS1972

CMB-13 research on carbon and graphite

Research and development are reported on phenolic resin binders, coke flour, binder soaking, hot molding glass-like carbons, and particle packing.

Smith, M. C.↗
NASA NTRS1972

CMB-13 research on carbon and graphite

Preliminary results of the research on carbon and graphite accomplished during this report period are presented. Included are: particle characteristics of Santa Maria fillers, compositions and density data for hot-molded Santa Maria graphites, properties of hot-molded Santa Maria graphites, and properties of hot-molded anisotropic graphites. Ablation-resistant graphites are also discussed.

Smith, M. C.↗
NASA NTRS1972

CMB-13 research on carbon and graphite

The effects of grinding on Santa Maria coke are considered, as well as the production of resin-bonded graphite from the coke. Kynol fibers, properties and purities of coal tar pitches, carbonization of resin components, synthesis of gamma BL (4-furfuryl 2-pentenoic acid gamma lactone), and a glass-like carbon powder for use as a filler are also discussed. The hydrogen contents of commercial cokes and graphites are tabulated, and a quantimet image-analyzing computer and its operation are described.

Smith, M. C.↗
NASA NTRS1972

CMB-13 research on carbon and graphite

The research on graphite and carbon for this period is reported. Topics discussed include: effects of grinding on the Santa Marie graphites, properties and purities of coal-tar, resin-bonded graphite, carbonization of resin components, and glass-like carbon filler.

Smith, M. C.↗
NASA NTRS1972

Space food systems - Mercury through Apollo.

Major achievements which characterized the development of food systems used by American astronauts in manned space flight are reviewed throughout a period spanning the Mercury, Gemini, and Apollo programs up to and including the Apollo 11 lunar landing mission. Lists of food types are accompanied by information on packaging, storage, preparation, consumption, and quality of particular products. Experience gained from development efforts for the Manned Orbiting Laboratory Program is also discussed.

Roth, N. G.↗