Engineering Papers⌕ Search

Engineering topics

Smith, J. C.

Publications and source records attributed to Smith, J. C..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Kepler: A Search for Terrestrial Planets - Kepler Data Characterization Handbook

The Kepler Data Characteristics Handbook (KDCH) provides a description of all phenomena identified in the Kepler data throughout the mission, and an explanation for how these characteristics are handled by the final version of the Kepler Data Processing Pipeline (SOC 9.3).The KDCH complements the Kepler Data Release Notes (KDRNs), which document phenomena and processing unique to a data release. The original motivation for this separation into static, explanatory text and a more journalistic set of figures and tables in the KDRN was for the user to become familiar with the Data Characteristics Handbook, then peruse the short Notes for a new quarter, referring back to the Handbook when necessary. With the completion of the Kepler mission and the final Data Release 25, both the KDCH and the DRN encompass the entire Kepler mission, so the distinction between them is in the level of exposition, not the extent of the time interval discussed.

Kepler↗
NASA NTRS2013

Dawn Maneuver Design Performance at Vesta

The Dawn spacecraft orbited the asteroid Vesta from July 16, 2011 to September 5, 2012, successfully accomplishing the four planned science orbits and two planned rotational characterization orbits. The lowest-altitude science orbit lasted four months, with 20 planned orbit maintenance maneuvers. Navigation results from Vesta demonstrate that the navigation plan was sufficient to achieve orbit delivery accuracy requirements. This paper compares the flown Dawn trajectory against the planned trajectory and expected maneuver dispersions. Understanding the effectiveness of the Vesta maneuver design plan is a key component of planning for operations at Ceres, the next destination for the Dawn mission.

Ion Propulsion↗
NASA NTRS2002

2001 Mars Odyssey aerobraking

The Mars Odyssey spacecraft was inserted into a highly elliptical capture orbit about Mars on October 24, 2001. This paper details the strategy, implementation, and results of the aerobraking phase of the mission.

Mars Odyssey aerobraking mission design navigation↗
NASA NTRS1993

Cassini Trajectory Design Description

The Cassini spaecraft will be the first one to visit the Saturnian system in more than two decades after the unprecedented flybys of the Voyager spacecraft in 1980 and 1981.

Cassini↗
NASA NTRS1990

Precision orbit determination for the Geosat Exact Repeat Mission

Precise ephemerides have been determined for the U.S. Navy Geosat Exact Repeat Mission (ERM) using an improved gravity-field model, PTGF-4A (Shum et al. 1989). The Geosat orbits were computed in a terrestrial reference system which is tied to the reference system defined by satellite laser ranging (SLR) to Lageos through a survey between the Tranet Doppler receiver and the SLR system located at Wettzell, FRG. The remaining Doppler tracking station coordinates were estimated simultaneously with the geopotential in the PTGF-4A solution. In this analysis, three continuous 17-day Geosat orbits, which were computed using the 46-station Tranet data and global altimeter crossover data, have a crossover residual rms of 20 cm, indicating that the Geosat radial orbit error is of the order of 20 cm. The orbits computed based on data collected by a 7-station OPNET tracking network and crossover data have the same level of accuracy.

Shum, C. K.↗
NASA NTRS1986

Feedback-Controlled Regulation of Gas Pressure

Internal pressure maintained over wide range of external pressures and exhaust rates. Gaseous pressure in liquid-nitrogen Dewar regulated by movable tapered plug, positioned automatically in response to signals generated by piezoelectric pressure transducer. Designed specifically to maintain airborne infrared detectors at constant temperature in evaporating liquid nitrogen, system modified to regulate pressure in other enclosed systems.

Smith, J. C.↗
NASA NTRS1983

Interactive analysis of a large aperture Earth observations satellite

A system level design and analysis has been conducted on an Earth Observation Satellite (EOS) system using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. The IDEAS program consists of about 40 user-friendly technical modules and an interactive graphics display. The reflector support system and feed mast of the EOS spacecraft are constructed with box-truss structural concept, a lattice configuration which can be packaged for delivery in a single Shuttle flight and deployed in orbit. The deployed spacecraft consists of a 120-m by 60-m parabolic focal axis. The spacecraft was modeled for structural, thermal, and control systems analysis and structural elements were designed. On-orbit dynamic and thermal loading analyses were conducted; spacecraft weights and developmental and first unit costs were determined.

Wright, R. L.↗
NASA NTRS1983

Interactive analysis of a large aperture Earth Observations Satellite

A system level design and analysis has been conducted on an Earth Observation Satellite (EOS) system using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. The IDEAS program consists of about 40 user-friendly technical modules and an interactive graphics display. The reflector support system and feed mast of the EOS spacecraft are constructed with a box-truss structural concept, a lattice configuration which can be packaged for delivery in a single Shuttle flight and deployed in orbit. The deployed spacecraft consists of a 120-m by 60-m parabolic reflector, a 120-m-long support structure, and a 30-m feed arc beam on the focal axis. The spacecraft was modeled for structural, thermal, and control systems analysis and structural elements were designed. On-orbit dynamic and thermal loading analyses were conducted and spacecraft weights were determined.

Wright, R. L.↗
NASA NTRS1982

Airborne multispectral linear array instruments at Goddard Space Flight Center

The fabrication of airborne instruments is contributing to the development of multispectral linear array technology at NASA's Goddard Space Flight Center. The linear array pushbroom radiometer (LAPR-I), was built to demonstrate capabilities for acquiring digital image data using linear arrays. The LAPR-I employed three arrays of 512 silicon photodiodes each to simultaneously acquire three channels of data for spectral bands within the visible and near-infrared portions of the spectrum. A second instrument, LAPR-II, uses four arrays each consisting of 512 silicon detectors. A filter wheel containing six spectral filters is used in conjunction with each array to allow filter changes in flight. This capability will facilitate studies into the utility of various bands within the visible and near infrared portions of the spectrum. The LAPR-II's aircraft mounting will allow off-nadir pointing (plus-or-minus 50 deg fore-and-aft and side-to-side) which will enable investigations of the radiometric and geometric effects of off-nadir viewing. A short wave infrared radiometer is also described.

Irons, J. R.↗
NASA NTRS1982

A plan for the characterization, calibration, and evaluation of LAPR-2

A new airborne Linear Array Pushbroom Radiometer (LAPR-II) was built. LAPR-II will use linear arrays of silicon detectors to acquire four channels of digital image data for spectral bands within the visible and near infrared portions of the spectrum (0.4 - 1.0 micrometers). The data will be quantized to 10 bits, and spectral filters for each channel will be changeable in flight. The instrument will initially be flown aboard a NASA/Wallops' aircraft, and off nadir pointing of LAPR-II will be possible. Together, the instrument and its platform will provide a flexible readily available source of digital image data for scientific experiments. If LAPR-II is to serve as a precise scientific instrument, the instrument's characteristics must be quantitatively described and the data must be calibrated with respect to absolute radiometric units. The LAPR-II is described and the work required to characterize the instrument's spectral response, radiometric response, and spatial resolution and to calibrate the response from the many detectors per array is outlined.

Ilrons, J. R.↗
NASA NTRS1979

Gravity field of Venus - A preliminary analysis

The gravitational field of Venus obtained by tracking the Pioneer Venus Orbiter is examined. For each spacecraft orbit, two hours of Doppler data centered around periapsis were used to estimate spacecraft position and velocity and the velocity residuals obtained were spline fit and differentiated to produce line of sight gravitational accelerations. Consistent variations in line of sight accelerations from orbit to orbit reveal the presence of gravitational anomalies. A simulation of isostatic compensation for an elevated region on the surface of Venus indicates that the mean depth of compensation is no greater than about 100 km. Gravitational spectra obtained from a Fourier analysis of line of sight accelerations from selected Venus orbits are compared to the earth's gravitational spectrum and spherical harmonic gravitational potential power spectra of the earth, the moon and Mars. The Venus power spectrum is found to be remarkably similar to that of the earth, however systematic variations in the harmonics suggest differences in dynamic processes or lithospheric behavior.

Phillips, R. J.↗
NASA NTRS1978

Visual and infrared photometry of asteroids

Results are reported for a survey of asteroids at 0.56, 1.6, and 2.2 microns. The observations of 30 asteroids are reduced to relative reflectances at 1.6 and 2.2 microns (such that the relative reflectance at 0.56 micron is scaled to unity). These relative reflectances have important implications for the classification of asteroids. Low-albedo asteroids show a significant range in their infrared relative reflectances, but carbonaceous chondritic-type material remains a good candidate for their surface composition. Many S-type asteroids are found to have significantly brighter infrared relative reflectances than M-type asteroids. Lunarlike dark glass on the surfaces of these objects is probably ruled out. A metallic phase is the most plausible candidate, which implies a multiple-component surface composition perhaps similar to certain stony-iron meteorites. The data suggest that such a metallic phase may be common in the inner asteroid belt.

Veeder, G. J.↗
NASA NTRS1976

Secular acceleration of Phobos and Q of Mars

Reductions of Mariner 9 TV data of Phobos and Deimos tend to corroborate the existence of a secular acceleration of Phobos commensurate with two recently reported values based on a reprocessing of earth-based data. These values of secular acceleration have been used together with Mariner 9 data on the physical size of Phobos and earth-based photoelectric observations which infer a carbonaceous composition for Phobos to place upper and lower bounds of 50 and 150, respectively, on the tidal dissipation function of Mars. The corresponding upper and lower bounds on the tidal lag angle are 0.19 and 0.57 deg.

Smith, J. C.↗
NASA NTRS1976

Quantitative mass distribution models for Mare Orientale

Six theoretical models for the mass distribution of Mare Orientale were tested using five gravity profiles extracted from radio-tracking data of orbiting spacecraft. The models with surface mass and moho relief produced the best results. Although there is a mascon-type anomaly in the central maria region, Mare Orientale is a large negative gravity anomaly. This is produced primarily by the empty ring basin. Had the basin filled with maria material it seems likely that it would have produced a mascon such as those presently existing in flooded frontside circular basins.

Sjogren, W. L.↗
NASA NTRS1972

Four years of dust particle measurements in cislunar and selenocentric space from Lunar Explorer 35 and OGO 3.

Since July 1967, knowledge concerning the distributions of picogram size particulate matter in selenocentric space has been obtained from the Lunar Explorer 35 dust particle experiment. For almost 40% of the time, the mean sporadic cumulative flux is quite similar to the flux in interplanetary space. However, there are fluctuations of an order of magnitude during major meteor showers. The coincident increase of the flux in selenocentric space during the shower periods has been observed for the fourth year. The 100-picogram sensor does not show an increase during shower times, indicating a mass threshold of less than 100 picograms for particles with velocities equal to or greater than lunar escape velocity. The flux values from Lunar Explorer 35 are compared to other long-lifetime measurements in selenocentric, cislunar and interplanetary space with excellent agreement for masses less than one nanogram.

Alexander, W. M.↗
NASA NTRS1967

Study made of pneumatic high pressure piping materials /10,000 psi/

Evaluations of five types of steel for use in high pressure pneumatic piping systems include tests for impact strength, tensile and yield strengths, elongation and reduction in area, field weldability, and cost. One type, AISI 4615, was selected as most advantageous for extensive use in future flight vehicles.

Loeb, M. B.↗