Engineering Papers⌕ Search

Engineering topics

Smith, J. A.

Publications and source records attributed to Smith, J. A..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Reflectance of a vegetation canopy using the Adding method

A modified vegetation reflectance model based on the Adding method is presented as a means to measure the interaction of shortwave radiation within a vegetation canopy. The canopy is conceptualized with reflecting and transmitting leaf facets, with the leaf orientations described by a leaf slope distribution, thereby yielding scattering matrices for canopy layers. The model predictions, when compared with ground-truth measurements, show good agreement except at visible wavelengths, where overestimations are observed. Conditions under which the model satisfies the reciprocity theorem are defined. Extension of the model by including azimuth is indicated.

Cooper, K.↗
NASA NTRS1982

Influence of sky radiance distribution on the ratio technique for estimating bidirectional reflectance

The technique of ratioing scene radiance to the radiance obtained from standard Lambertian reference panels in order to estimate bidirectional reflectance factors may depend on the angular distribution of the diffuse irradiance field as well as the direct solar irradiance. A simulation study was performed to estimate the magnitude of this effect for differing clear sky irradiance distributions for a variety of vegetated surfaces. For the seven surfaces and wavelengths analyzed, the error induced in the estimation of bidirectional reflectance factors using the standard ratio technique was less than 5 percent for zenith view and sun angles less than 55 degrees.

Kirchner, J. A.↗
NASA NTRS1982

Space Shuttle Orbiter - Reusable surface insulation flight performance

The first two flights of the Space Shuttle Orbiter have provided the initial data required for operational certification of the Thermal Protection System (TPS). The flight performance characteristics of the TPS reusable surface insulation (RSI) will be discussed. The discussion will be based on post-flight inspections of the RSI and post-flight interpretations of the flight instrumentation data. The flights to date indicate that the thermal and mechanical design requirements for the RSI system were met or exceeded.

Dotts, R. L.↗
NASA NTRS1981

Simulated directional radiances of vegetation from satellite platforms

A computer modeling and simulation investigated the effects of off-nadir viewing, canopy geometry and density, solar zenith angle, and atmospheric conditions on the radiance of several vegetated targets. Effects on the normalized difference (ND) index were also investigated, and two wavelengths of 0.68 and 0.80 micron were simulated at nine sensor zenith angles, five sensor azimuths, and nine solar zenith angles. Seven canopies of low, medium, and high densities were observed, and bidirectional reflectance functions of other canopies were discussed. A modified Turner's (1974) atmospheric radiative transfer model was used for 2300 simulation runs. Off-nadir viewing effects were more pronounced in the red than the infrared, and the variability was found to be a function of canopy geometry. The ND index eliminated much of the variability seen in the individual bands, while the overall variability decreased with increasing biomass, and increased with increasing solar zenith angles.

Kirchner, J. A.↗
NASA NTRS1981

Monomethylhydrazine versus hydrazine fuels - Test results using a 100 pound thrust bipropellant rocket engine

A test program was performed to evaluate hydrazine (N2H4) as a fuel for a 445 Newton (100 lbf) thrust bipropellant rocket engine. Results of testing with an identical thruster utilizing monomethylhydrazine (MMH) are included for comparison. Engine performance with hydrazine fuel was essentially identical to that experienced with monomethylhydrazine although higher combustor wall temperatures (approximately 400 F) were obtained with hydrazine. Results are presented which indicate that hydrazine as a fuel is compatible with Marquardt bipropellant rocket engines which use monomethylhydrazine as a baseline fuel.

Smith, J. A.↗
NASA NTRS1981

Thermal IR exitance model of a plant canopy

A thermal IR exitance model of a plant canopy based on a mathematical abstraction of three horizontal layers of vegetation was developed. Canopy geometry within each layer is quantitatively described by the foliage and branch orientation distributions and number density. Given this geometric information for each layer and the driving meteorological variables, a system of energy budget equations was determined and solved for average layer temperatures. These estimated layer temperatures, together with the angular distributions of radiating elements, were used to calculate the emitted thermal IR radiation as a function of view angle above the canopy. The model was applied to a lodgepole pine (Pinus contorta) canopy over a diurnal cycle. Simulated vs measured radiometric average temperatures of the midcanopy layer corresponded with 2 C. Simulation results suggested that canopy geometry can significantly influence the effective radiant temperature recorded at varying sensor view angles.

Kimes, D. S.↗
NASA NTRS1980

Vegetation reflectance measurements as a function of solar zenith angle

An understanding of the behavior of vegetation canopy reflectance as a function of solar zenith angle is important to several remote sensing applications. Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day of a lodgepole pine and two grass canopies. Mathematical simulations of both a spectral hemispherical-conical reflectance factor and a spectral bi-hemispherical reflectance were performed for two theoretical canopies of contrasting geometric structure. These results and results from literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for future measurements are proposed.

Kimes, D. S.↗
NASA NTRS1980

Simulation of solar radiation absorption in vegetation canopies

A solar radiation canopy absorption model, including multiple scattering effects, was developed and tested for a lodgepole pine (Pinus contorta) canopy. Reflectance above the canopy, spectral transmittance to the ground layer, and geometric and spectral measurements of canopy elements were made. Relatively large differentials occurred in spectral absorption by canopy layers, especially in the photosynthetically active region, as a function of solar zenith angle. In addition, the proportion of total global irradiance absorbed by individual layers varied greatly as a function of solar zenith angle. However, absorption by the entire canopy system remained relatively constant.

Kimes, D. S.↗
NASA NTRS1980

Multispectral Resource Sampler (MRS): Proof of concept. Study on bidirectional reflectance. A simulation analysis of bidirectional reflectance properties and their effects on scene radiance. Implications for the MRS

A study was performed to evaluate the geometrical implication of a Multispectral Resource Sampler; a pointable sensor. Several vegetative targets representative of natural and agricultural canopies were considered in two wavelength bands. All combinations of Sun and view angles between 5 and 85 degrees zenith for a range of azimuths were simulated to examine geometrical dependance arising from seasonal as well as latitudinal variation. The effects of three different atmospheres corresponding to clear, medium and heavy haze conditions are included. An extensive model data base was generated to provide investigators with means for possible further study of atmospheric correction procedures and sensor design questions.

Smith, J. A.↗
NASA NTRS1979

Interpreting vegetation reflectance measurements as a function of solar zenith angle

Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day for a lodgepole pine and two grass canopies. Mathematical simulations of both spectral hemispherical-conical and bi-hemispherical reflectances were performed for two theoretical canopies of contrasting geometric structure. These results and comparisons with literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for further measurements are proposed.

Kimes, D. S.↗
NASA NTRS1979

Thermal insulation protection means

A system for providing thermal insulation for portions of a spacecraft which do not exceed 900 F during ascent or reentry relative to the earth's atmosphere is described. The thermal insulation is formed of relatively large flexible sheets of needled Nomex felt having a flexible waterproof coating. The thickness of the felt is sized to protect against projected temperatures and is attached to the structure by a resin adhesive. Vent holes in the sheets allow ventilation while maintaining waterproofing. The system is heat treated to provide thermal stability.

Dotts, R. L.↗
NASA NTRS1979

Coated-felt thermal insulation

Thin coated-felt insulation tile is lighter and easier-to-install replacement for silica tiles for temperatures below 700 F.

Dotts, R. L.↗
NASA NTRS1977

Double-discharge stabilization of supersonic CO laser mixtures

Experiments have been conducted to study the applicability of a CW double-discharge stabilization scheme under conditions appropriate for high-energy lasers in supersonic flows. Steady arc-free volume discharges have been produced in a Mach 3 supersonic-flow test cavity using an auxiliary discharge to stabilize the main discharge at low-current densities in N2 and He/CO mixtures. A significant result is the lack of observed plasma E/N changes in response to auxiliary-discharge current changes. Also, where glow discharges were obtained, the energy loading achieved was less than the threshold required for laser operation.

Srinivasan, G.↗
NASA NTRS1976

Signature extension for spectral variation in soils, volume 4

The reduced 1975-1976 field data at Garden City, Kansas are presented. These data are being used to evaluate the SRVC model predictions, to compare the ERIM-SUITS model with both the SRVC results and field data, and finally, to provide a data base for reviewing multitemporal trajectories. In particular, the applicability of the tasselled cap transformation is reviewed. The first detailed verification of this approach utilizing actual field measured data from the LACIE field measurement program, rather than LANDSAT data, is given.

Berry, J. K.↗
NASA NTRS1976

Discharge stabilization studies of CO laser gas mixtures in quasi-steady supersonic flow

Experiments were conducted to study the applicability of a double discharge stabilization scheme in conditions appropriate for high energy CO lasers in supersonic flows. A Ludwieg tube impulse flow facility and a ballasted capacitor bank provided essentially steady flow and discharge conditions (d.c.) for times longer than ten electrode length-flow transit times. Steady, arc-free, volume discharges were produced in a Mach 3 test cavity using an auxiliary discharge to stabilize the main discharge in N2 and He/CO mixture. A signigicant result is the lack of observed plasma E/N changes in response to auxiliary discharge current changes. Also, where glow discharges were obtained, the energy loading achieved was very much less than the threshold level required for laser operation.

Srinivasan, G.↗
NASA NTRS1976

Extracting scene feature vectors through modeling, volume 3

The remote estimation of the leaf area index of winter wheat at Finney County, Kansas was studied. The procedure developed consists of three activities: (1) field measurements; (2) model simulations; and (3) response classifications. The first activity is designed to identify model input parameters and develop a model evaluation data set. A stochastic plant canopy reflectance model is employed to simulate reflectance in the LANDSAT bands as a function of leaf area index for two phenological stages. An atmospheric model is used to translate these surface reflectances into simulated satellite radiance. A divergence classifier determines the relative similarity between model derived spectral responses and those of areas with unknown leaf area index. The unknown areas are assigned the index associated with the closest model response. This research demonstrated that the SRVC canopy reflectance model is appropriate for wheat scenes and that broad categories of leaf area index can be inferred from the procedure developed.

Berry, J. K.↗
NASA NTRS1975

Signature extension for sun angle, volume 1

The author has identified the following significant results. Within a restricted zenith sun angle range of 35 - 50 degrees, it was empirically observed that canopy reflectance is mainly Lambertian. Reflectance changes with crop stage were simple shifts in scale in the sun angle range. It was noted that sun angle variations depend on canopy characteristics. Effects of the vegetative canopy were most pronounced at the larger solar zenith angles (20 %). The linear sun angle correction coefficients demonstrate a dependency on both crop stage (15-20 %) and crop type (10-20 %). The use of canopy reflectance modeling allowed for the generation of a simulated data set over an extremely broad envelope of sun angles.

Smith, J. A.↗