Engineering Papers⌕ Search

Engineering topics

Smith, D. E.

Publications and source records attributed to Smith, D. E..

At least 109 records · Page 6

The report of the Gravity Field Workshop

A Gravity Field Workshop was convened to review the actions which could be taken prior to a GRAVSAT mission to improve the Earth's gravity field model. This review focused on the potential improvements in the Earth's gravity field which could be obtained using the current satellite and surface gravity data base. In particular, actions to improve the quality of the gravity field determination through refined measurement corrections, selected data augmentation and a more accurate reprocessing of the data were considered. In addition, recommendations were formulated which define actions which NASA should take to develop the necessary theoretical and computation techniques for gravity model determination and to use these approaches to improve the accuracy of the Earth's gravity model.

Smith, D. E.↗

Prospects for TLRS baseline accuracies in the western USA

One of the main goals of the LAGEOS satellite mission is the detection of regional geotectonic movements. A parametric study with the intention to obtain the optimal baseline precision from dynamic solutions of laser ranging to LAGEOS is presented. The varied parameters are: length of reduced arc, number of tracking stations, data noise and rate, biases, refraction errors, system efficiency, gravity model errors in the value of GM. The baseline precisions are 1-10 cm depending upon the set of parameters adopted. General principles obtained are also presented.

Christodoulidis, D.↗

Long term evolution of the LAGEOS orbit

Since LAGEOS was launched in May 1976, precise laser observations of the satellite have been used to estimate relative station positions, polar motion and the earth's gravitational constant. This work was accomplished with a model of the orbit dynamics that was adequate to compute trajectories of meter level accuracy for periods of 30 days in length. Knowledge of the long-term evolution of the LAGEOS orbit has now been improved by an analysis of the ranging data collected during the first two years and eight months of the mission. Revisions to the originally adopted force model suggested by this work are presented in the form of the time histories of individual Keplerian elements. Some unexpected variations in LAGEOS orbital period are observed and clear signatures in the inclination history of this satellite, which are predominantly caused by earth and ocean tidal effects, are also described. The motion of the ascending node of the orbit suggests short-term precisions of 1 or 2 hundredths of an arcsecond, equivalent to about a millisecond in Universal Time.

Smith, D. E.↗

Performance analysis of the Spaceborne Laser Ranging System

The performance of the Spaceborne Laser Ranging System in the determination of distances between ground-based targets is discussed. The system consists of an orbiting pulsed laser distance measurement system that sequentially measures the distance to retroreflector arrays on the ground. Intersite distances are then determined from an analysis of the vertical distance data and the spacecraft orbital dynamics. Results of computer simulations indicate that for a six-day observing period with 50 percent cloud cover, uncertainties of 1 to 3 cm are expected for intertarget separations of 50 to 1200 km, with vertical uncertainties from 1 to 12 cm. Furthermore, it is found that by redetermining relative target positions, precision can be increased to less than 0.3 cm to 1 cm in the baseline and to 0.4 to 4 cm in vertical distance. It is concluded that with these precisions, strain and strain rate can be determined for crustal dynamics and earthquake studies, and geodetic surveys can be performed.

Kahn, W. D.↗

Performance Analysis of the Spaceborne Laser Ranging System

The 'spaceborne laser ranging system' is a proposed short pulse laser on board an orbiting spacecraft. It measures the distances between the spacecraft and many laser retroreflectors (targets) deployed on the earth's surface. The precision of these range measurements was assumed to be about plus or minus 2 cm. These measurements were then used together with the orbital dynamics of the spacecraft to derive the intersite vector between the laser ground targets. The errors associated with this vector were on the order of 1 to 2 cm. The baseline distances determined range from 25 km to 1200 km. By repeating the measurements of the intersite vector, strain and strain rate errors were estimated. The realizable precision for intersite distance determination was estimated to be on the order of 0.5 cm at 300 km and about 1.5 cm at 1200 km. The corresponding inaccuracies for the intersite distances were larger, than is 1 cm and 3.5 cm respectively. The corresponding precision in the vertical direction was 1 cm and 3 cm.

Kahn, W. D.↗

Dynamic satellite geodesy

The paper describes operation of the GEOS-3 and Lageos spacecraft launched by NASA as part of the Earth and Ocean Dynamic Program. The investigations conducted by using GEOS-3 include the determination of tracking station coordinates, polar motion, and the use of altimetry in orbit determination. Lageos was designed as a precision target for making geodetic measurements with ground laser systems. Consideration is given to the progress made in the investigation and determination of tidal parameters by means of satellite perturbation methods. Satellite geodetic methods based on the ability to determine precise satellite orbits and orbit determination are outlined. Emphasis is placed on the future studies employing Spaceborne Laser and Global Positioning System concepts.

Smith, D. E.↗

Base line estimation using single passes of laser data

The laser data of the GEOS 3 satellite passes observed by four stations at Greenbelt (Maryland), Bermuda, Grand Turk Island (Bahamas) and Patrick Air Force Base (Florida), were employed to determine precise interstation base lines and relative heights in short orbital arcs of no more than 12-min duration. No more than five arcs of data are required to define the interstation base lines to 30-cm precision. Base lines running parallel to the orbital motion can be defined to submeter precision from a single short arc of data. Combining arcs of different orbital geometry in a common adjustment of two or more stations relative to the base station helps to compensate for weak base line definition in any single arc. This technique can be used for tracking such spacecraft as Lageos, a high-altitude retroreflector-carrying satellite designed for precise laser ranging studies.

Dunn, P. J.↗

Determination of polar motion and earth rotation from laser tracking of satellites

Laser tracking of the Lageos spacecraft has been used to derive the position of the earth's pole of rotation at intervals during October, November and December 1976. The estimated precision of the results is 0.01 to 0.02 arcseconds in both x and y components, although the formal uncertainty is an order of magnitude better, and there is general agreement with the Bureau International de l'Heure smoothed pole path to about 0.02 arcseconds. Present orbit determination capability of Lageos is limited to about 25 cm rms fit to data over periods of 5 days and about 50 cm over 50 days. The present major sources of error in the perturbations of Lageos are earth and ocean tides followed by the earth's gravity field, and solar and earth reflected radiation pressure. Ultimate accuracy for polar motion and earth rotation from Lageos after improved modeling of the perturbing forces appears to be of order + or - 5 cm for polar motion over a period of about one day and about + or - 0.2 to + or - 0.3 milliseconds in UT for periods up to 2 or 3 months.

Smith, D. E.↗

Determination of station coordinates from Lageos

Laser tracking of Lageos by the NASA and SAO laser tracking systems from its launch in May 1976 until December 1976 has been used to derive the coordinates of the tracking stations. The NASA tracking data from four systems in the United States had a precision of 10 to 15 cm and the SAO stations in North America, South America and Australia had precisions between 0.8 meters and 1.3 meters. Nearly 90,000 observations of Lageos were used in this analysis. Thirty-one orbital arcs, each five days in length, were derived which had orbital fits of 25 cm for the NASA data and at about 1 meter level for the SAO data. The coordinates of all eight stations were derived from this data set and the preliminary estimate of the overall accuracy of 50 cm in each coordinate. These results are in general agreement at about the 30 cm level with other results obtained from laser tracking of Beacon Explorer C.

Smith, D. E.↗

Determination of the geocentric gravitational constant from laser ranging on near-earth satellites

Laser range observations taken on the near-earth satellites of Lageos (a = 1.92 e.r.), Starlette (a = 1.15 e.r.), BE-C (a = 1.18 e.r.), and Geos-3 (a = 1.13 e.r.) have been combined to determine an improved value of the geocentric gravitational constant (GM). The value of GM is 398600.61 cu km/sec per sec, based upon a speed of light, c, of 299792.5 km/sec. Using the IAG-adopted value of c equalling 299792.458 km/sec scales GM to 398600.44 cu km/sec per sec. The uncertainty in this value is assessed to be plus or minus 0.02 cu km/sec per sec. Determinations of GM from the data taken on these four satellites individually show variations of only .04 cu km/sec per sec from the combined result. The Lageos information dominated the combined solution, and gave the most consistent results in its data subset solutions. The value obtained for GM from near-earth laser ranging compares quite favorably with the most recent results of the lunar laser and interplanetary experiments.

Lerch, F. J.↗

Spaceborne ranging system

A spaceborne laser ranging system is described that could survey a large network of ground reflectors, and provide their relative locations to a precision of + or - 1 cm. This performance is believed realizable for networks covering up to 10 to 6th power square kilometers and from only a few days of observations. This system could be used to monitor crustal movements in many areas of the world and has the potential to provide an almost real-time system for detecting precursory ground motions before large earthquakes.

Smith, D. E.↗

Recent advances in computational techniques

The determination of very precise orbits and geodynamic parameters from laser tracking data requires the continual development and improvement of the software systems and computational techniques. Computational accuracies at the few centimeter level are presently required to match the performance of the present day laser ranging systems and altimeters and in the next few years the accuracies are expected to increase further. The major error sources in orbit determination are briefly discussed and the present and future modeling activities needed to meet the accuracy requirements of the next few years are described.

Smith, D. E.↗

Polar motion and earth tides from laser tracking

The paper discusses techniques available for measuring polar motion, earth rotation and earth tides with laser tracking of satellites. In a discussion of future prospects, it is noted that when the Laser Geodynamics Satellite is launched, a network of laser stations is projected to be able to achieve better than 10 cm from each coordinate from less than one day of tracking.

Kolenkiewicz, R.↗

Geodetic applications of laser ranging

The paper describes the use of dynamic methods of laser ranging of a low altitude satellite along with proposed experiments involving both dynamic and geodetic methods of laser ranging of the Lageos satellite. Particular attention is given to the testing of laser ranging techniques across the San Andreas Fault in California where it is hoped that plate motion will be observable after several years of measurements.

Smith, D. E.↗

The measurements of latitude, time, and height variations at a single laser tracking station

Recent analysis of laser data for determining variation of latitude have been based on apparent variations in the orbital inclination of the satellite derived from short orbital arcs of 6-8 hours. An alternative method, based on the daily adjustment of the station position to a much longer arc of 2 or 3 weeks has recently been developed and tested. In the new method a long orbital arc is derived from many days of data and is subsequently used as a reference orbit for the adjustment of the position of the station (only) on each day of the long arc for which tracking data are available. This new technique appears to give slightly better results when it is applied to a test period in August 1970, with the added advantage that earth rotation measurements can be derived from the same data at the same time. The results for the test period indicate a precision of 74 cm in variation of latitude and 0.81 ms in monitoring the earth's rotation with 6 hours of data.

Dunn, P. J.↗

Heat transfer evaluation in a plasma core reactor

Numerical evaluations of heat transfer in a fissioning uranium plasma core reactor cavity, operating with seeded hydrogen propellant, was performed. A two-dimensional analysis is based on an assumed flow pattern and cavity wall heat exchange rate. Various iterative schemes were required by the nature of the radiative field and by the solid seed vaporization. Approximate formulations of the radiative heat flux are generally used, due to the complexity of the solution of a rigorously formulated problem. The present work analyzes the sensitivity of the results with respect to approximations of the radiative field, geometry, seed vaporization coefficients and flow pattern. The results present temperature, heat flux, density and optical depth distributions in the reactor cavity, acceptable simplifying assumptions, and iterative schemes. The present calculations, performed in cartesian and spherical coordinates, are applicable to any most general heat transfer problem.

Smith, D. E.↗

The applications of laser tracking to the measurement of intersite distance

Range data from ruby laser systems tracking Geos-3 and Beacon Explorer C from Greenbelt, Md., Bermuda, and San Diego and Quincy, Calif. were analyzed to establish baselines for these sites. A least-squares adjustment was applied to the data. Results with an estimated precision of 20 cm, obtained using the GEM 8 gravity model (Wagner et al., in press), are: San Diego-Greenbelt, 3606 km; Greenbelt-Bermuda, 1323 km; San Diego-Quincy, 908 km.

Smith, D. E.↗

Contributions to the National Geodetic Satellite Program by Goddard Space Flight Center

The major scientific contributions of Goddard Space Flight Center to the National Geodetic Satellite Program between 1965 and 1973 are presented and discussed. The primary results described are the determination of the earth's gravitational field from satellite tracking and surface gravimeter data to an accuracy of about 4 mGal for wavelengths of about 1000 km and larger; the construction of a detailed geoid suitable for geodetic, tectonic, and altimetry data analysis accurate to about 2 m over continents and to 2-5 m over the northeast Pacific and Atlantic oceans; and the positioning of globally distributed tracking stations to an accuracy of 5-10 m for the interconnecting of local geodetic datums. In addition, work on the observation of the earth and ocean tidal perturbations of satellites is discussed and reviewed.

Smith, D. E.↗